J.Burrows JBSHS3306A User manual

JBSHS3306A
expose
end.

press the AUTO button for normal operation.
JBSHS3306A
JBSHS3306A
340×250×520mm
9.15kg
Continuous Shredding
15 Litre
58dB
5 sheets A4 80gsm
cut
1. Press the power switch on the back of the shredder to 'ON' position.
2. Check the 'AUTO' button with blue light is on. If not, press one time.
3. Feed your paper into the paper entry. The shredder will begin to shred automatically.
4. Once all the paper has been shredded, the shredder will stop and enter standby mode.
5. When the bin is full, the shredder will stop shredding. Please empty the waste bin
before continuing to shred.
Press the power switch on the back of the machine to 'OFF' position.
If a paper jam occurs, the cutting unit will run in reverse and jammed paper will
withdraw automatically.
paper entry opening.
1.To turn the shredder to this mode, press the “REV” button.
2.The cutting unit in the machine will run in reverse. The paper will push out of the
paper entry opening.
blue
shredder
power