Bonsaii C144-D User manual

= bonsaii
Paper Shredder C144-D
Instruction Manual
24-Sheet Cross-Cut Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better! Customer Service:
Contact our friendly customer service department for help first. % : [email protected]
Replacements for missing or damaged parts will be shipped. Q, : 1-844-728-6917

KNOW YOUR SHREDDER
@ Power switch (“"=on,"0"= OFF)
@ Power button (green light under work
status)
@Bin full indicator light (green light under
basket fulling status)
@ Overload &0verheat indicator light
(Overload in red with flashing Overheat
inred)
® FWD indicator light (FWD indicator light
in green when Press FWD button)
® REV indicator light (REV indicator light in
green when Press REV button)
@ FWD button (green light under work status)
® REV button (green light under work status)
@ Feed Opening
@ Transparent Window
@ Basket
For safety reasons, shredder @ Basket Handle
will operate only if the shredder
head is in correct position and @ Shredder's Caster
used with supplied basket. @ Caster Brake
TECHNICAL SPECIFICATIONS
Vottage 120VAC, 60Hz
24 sheets/time(A4 75g/m”.
Feeding Opening noaheetof C(D/“meg ) Feed Opening | 228 x 5mm
Capacity one sheet of credit cardtime | (E'W) 6.98x 0.2 Inches
Basket Type Pull out Shred Type Cross-Cut
Basket Capacity 7.1Gallon/27L Shred Paper Size | 4x35mm(0.16x1.38Inches)
yepy | 1496 X 12.6 X 22.83 Inches Paper, plastic credit card,
Product Size (L'W'H) | 350y 320 x 580 mm Shred Functions | gyaple. clips, CD
Will not shred : large paper clips, Unopened junk mail, window or insulated envelopes, continuous
forms, newsprint,bound pages (for example: notepads, checkbooks, magazines, etc...), transparencies,
laminated documents, cardboard, any items with adhesives, hard materials or plastic (except plastic
Credit Cards and CDs).
Maximum recommended daily usage rates: 130 sheets, 5 credit cards.
3

OPERATING INSTRUCTIONS
1. Plug in and press the power switch “-”.
2. Power, FWD and REV buttons in green lights, it means
under working status. (feed papers, credit card, clips, staple
or CD to shred ) (3) continuous operation around 6ominutes.
A WARNING
" D oD @ sevareof i cavsed
BV Co slashing o norrect
Cbhrecing. plase wear
atetsgoeesandsed ne
D coectway
3. When finished shredding, please press “ power
m button” or “power switch” to “O”
* Bin full: Bin full indicator light in green status, the shredder
—\ stops to work and need to clean the wastepaper.
*Bin full indicator light will be OFF and Power& FWD&REV
button will be in green with flashing when the basket is
opened.
After clean the basket and assemble the basket with shredder’s
® body well, Bin full indicator light will be OFF, Power&
FWD&REYV button in green, Shredder is under staying working
status.
Jam: Press Rev button and take
out of the jammed paper.
Overloading: (Overload&Overheat
indicator light in red with flashing
status, the excess papers will be
disgorged automatically and need to
take out of excess papers by hand)
Overheating: (Overload&Overheat indicator light in red status,
need to await cooling down) & Cool down around 40 minutes
4

PRODUCT MAINTENANCE
@ [II Plug in and press the power switch “ - ".
When power, FWD and REV button in green lights, feed
one shredder lubricant pack to shred.
Press REV button for 2-3 seconds
staying ( don't pull out the shredder
lubricant pack)
®
:d) @ @\\ Repeat the operations from “REV” to “FWD” for 3~5times till the
@ shredder lubricant pack is fully shredded.
E =) When finished shredding, please press “ power button” or
‘power switch” to “O”.
* Only use the professional shredder lubricant pack to maintain the shredder such as
Bonsaii shredder Lubricant 24-Pack(LS24)/12-Pack(LS12). (no cleaner, inflammable
liquids, gases oil etc... @)

TROUBLESHOOTING
Malfunction Reason Solution
) Please kindly check whether you
The
power
plug
doesn't
connect
use
the
machine
with
related
supply
to the power supply. voltage or Plug in again correctly.
Power supply voltage is 100 low Please kindly find a related supply
or no power supply. voltage to use it
The machine is under overheating
protection, because the machine is Wait for the machine to cool down
Stop Working | over the continues working naturally.
capacity.
To make the paper thicker ,You can
The thickness of paper is too thin. acd more papers or fold the paper.
Reduce paper quantity with an
The machine is overloading, acceptable amount and place the
because the paper is over paper into the feeding opening of
machine Max shredding quantities. shredder again.
Please replace the power cable with
s . ’ the same parameters by professional
‘amage of power cable person or contact with our
customer service.
The basket is full. Empty the basket.
Defestive of mach Please kindly contact with our
efective of machine. customer service.
Please kindly use the function of
Jam Paper jam “Reverse" 10 take out the excess
paper.
1.Please unplug first and use soft cloth
o cotton swab to clean the foreign objects
without any cleaner or water .
Paper dust and other foreign objects 2.If there are some paper scraps around
_ | cover the sensor. the sensor area ,please kindly use cotton
Keep Running | The location of sensor is in the swab or needle nosed pliers to take out
shredder's feeding opening look like | the paper scraps.
glass beads or marbles. please don't overexert and use
Sharp tools to clean or poke the sensor
10 avoid damaging the sensor.
Loud Noise | The shredder is placed on an Changs the location
unsuitable place.
If the above answers can not solve your problems, please kindly contact with our
customer service team via email customer-care@bonsai