4x40mm
JBSHS360A
310x190x325mm
3.2kg
220mm
2 min ON 40min OFF
13 Litre
7 sheets(A4 80g)
73 dB around
220-240V~ 50HZ
1.0A
Paper entry width:
Net weight:
Dimension:
Model:
Duty cycle:
Waste bin volume:
Shred paper capacity:
Shred size:
Noise level:
Voltage:
Current:
KNOW YOUR APPLIANCE
USING YOUR SHREDDER
SET TING UP THE SHR EDDER
1.Remove the shredder from its carton and unwind the cord to its full length.
2.Place the waste bin on a firm level surface in a stable upright position.
3.Take the main shredder unit and put it onto the waste bin.
4.Make sure the function switch is in the “OFF”position
5.Connect the plug to the V AC mains.
AUTO MODE
1.To use this mode, turn the function switch to“AUTO”.
2.Feed the paper into the paper throat, the shredder will operate to
shred the paper.
3.Once all the papers / credit cards have been shredded, it will stop itself.
OFF M ODE
To switch the shredder off, turn the function switch to the “OFF”position.
REV ERSE MO DE
1.To switch the shredder to this mode, switch the function switch to “REV”position.
2.The cutting blade in the shredder will run in the reverse direction.
.
220-240
/ credit card
MOTOR OVERHEAT SAFETY DEVICE
Your shredder is fitted with a safety device that switches off in the unit in event of an
overload. During an overload situation, the unit will stop automatically, and the
overheat protection indicator will light up. Turn the unit off and unplug from the mains.
Allow the motor to cool down to room temperature before resuming operation. If the
unit fails to operate or the safety device switches the unit off again, return the unit.
CLEANING
The paper shredder requires regular cleaning.
1.Before cleaning ensure power is switched off at mains and plug has been removed.
2.Clean the outer surface with a soft damp cloth only.
3.Ensure the unit is dry before connect to the mains.
PRODUCT SPECIFICATION
JBSHS360A
DIS POSE OF WA STE
1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assemble shredder correctly before shredding.
PAP ER JAM
1.Turn the function switch to“REV”position to let the cutting blade run in the
reverse direction. The paper will reverse out from the throat.
2.Pull out the paper carefully to clear the throat.
3.Once the jammed paper is removed, turn the function switch to“AUTO”position
for normal operation.
REV:
OFF:
AUTO:
the machine will reverse paper
when you place the switch on
this position
the machine will stop working
When you place the switch
on this position
Paper /Credit card entry
Power cord
Waste bin
Shredder head
Function switch ( / Off / Auto)Rev
Featrues Shreds paper, credit cards