J.Burrows JB19BF18 User manual

Operation
Wireless Pro Headphones with Boom Mic
MODEL NO. JB19BF18
QUICK-START
GUIDE
Bluetooth
JB19BF18
Power On/Off
Power on: Slide the switch to the CENTRE
position (Blue light illuminates for 2
seconds)
1. Connect first Bluetooth device
Functions
Power off: Slide the switch to the
position (Red light illuminates for 2
seconds)
Previous track
Play/pause
Next track
Rotate to adjust volume
USB-C charging port
Boom mic
Mute boom mic
Rotate boom mic
Answer calls/
Hang up /
Mute microphone
Bluetooth
on/off
Indicator
light
3.5mm
AUX
Input
Built-in mic
Turn on Bluetooth function on mobile
device and select to pair with JB19BF18
(LED will flash red and blue when ready
to connect)
2. Connect second Bluetooth device
Slide the switch to the " " and hold about 10
seconds until the voice prompts states "pairing",
then search the name"JB19BF18" on your mobile
device and select to connect.

Charging
Plug USB-C cable
into computer’s USB port
Plug USB-C cable
into USB wall charger
Low battery alert
When battery voltage is less than 3.3V,
a voice prompt will advise there is low
battery.
Charging
Red light on
Full charge
Light off
Before using the headphone for the first time,
charge it for at least two hours
Do not connect this cable to products other than JB19BF18 wireless pro
headphones. Connecting this cable to other devices might cause
damage to both cable and the device.
Slide the switch to the
CENTRE position
The blue LED light will flash to indicate
the headphone is connected
JB19BF18
Bluetooth
Bluetooth ON
Devices
Now discoverable
Paired
LED will flash red
and blue when ready
to connect
In your device‘s Bluetooth
settings activate bluetooth
and select ”JB19BF18” enter
the PIN ‘0000’ if needed
Bluetooth Pairing
Note: Playback using certain devices may change the flashing LED to a
different colour for the duration of playback.