Jabra PanaCast 50 User manual

PanaCast 50
Screen Mount
Install below screen
Install above screen
Start from page 1
Start from page 7

Screen Mount horizontal section Screws
Screen Mount vertical section
M6x30
(4 pcs)
M8x30
(4 pcs)
M5x8
(2 pcs)
M6x40
(4 pcs)
M8x40
(4 pcs)
M5x12
(2 pcs)
M6x50
(4 pcs)
M8x50
(4 pcs)
Protective pads
(2 pcs)
M6
(4 pcs)
Phillips head screwdriver
M8
(4 pcs)
4 mm hex key
WashersSpacers
Tools needed (not supplied in the pack)
2 mm
(2 pcs)
5 mm
(4 pcs)
12 mm
(2 pcs)
22 mm
(4 pcs)
32 mm
(4 pcs)

1
1If the screen is already wall-mounted,
remove it from the wall.
Detach the existing VESA mount from your screen.
2

2
3Measure the distance between the VESA mount hole
and the bottom of the screen. This distance is X.
6 987
3 54
21 121110
Assemble the Screen Mount and ensure that the
distance illustrated is approx X +10 cm or X +4 inches.
4
X +10 cm or
X +4 inches

3
5Screw the horizontal and vertical sections together
using the supplied M5x8 screws and a 4 mm hex key.
M5x8
M5x12
Stick the adhesive protective pads to the back of the
Screen Mount.
6

4
Screws
M6x30
(4 pcs)
M8x30
(4 pcs)
M6x40
(4 pcs)
M8x40
(4 pcs)
M6x50
(4 pcs)
M8x50
(4 pcs)
M6
(4 pcs)
M8
(4 pcs)
Washers
Spacers
2 mm
(2 pcs)
5 mm
(4 pcs)
12 mm
(2 pcs)
22 mm
(4 pcs)
32 mm
(4 pcs)
Select the screws, washers and spacers that best fit the
contours of your screen.
Screw the Screen Mount and the VESA mount (not
supplied) to the screen as illustrated, using the ideal
spacer length for the uppermost screws.
8
Screen
Screen
Bottom of the Screen
7
Screen
Screen

5
Tilt the hinge on the PanaCast 50 for easy access
to the screw holes.
9
10 Mount the PanaCast 50 to the Screen Mount using
the supplied M5x12 screws and a 4 mm hex key.
M5x12

6
11 Rotate the PanaCast 50 into its final position and
angle the camera to point at eye-level.

7
1If the screen is already wall-mounted,
remove it from the wall.
Detach the existing VESA mount from your screen.
2

8
Assemble the Screen Mount and ensure that the
distance illustrated is approx X +10 cm or X +4 inches.
4
X +10 cm or
X +4 inches
3Measure the distance between the VESA mount hole
and the top of the screen. This distance is X.
6 987
3 54
21 121110

9
5Screw the horizontal and vertical sections together
using the supplied M5x8 screws and a 4 mm hex key.
M5x8
M5x12
Stick the adhesive protective pads to the back of the
Screen Mount.
6

10
Screws
M6x30
(4 pcs)
M8x30
(4 pcs)
M6x40
(4 pcs)
M8x40
(4 pcs)
M6x50
(4 pcs)
M8x50
(4 pcs)
M6
(4 pcs)
M8
(4 pcs)
Washers
Spacers
2 mm
(2 pcs)
5 mm
(4 pcs)
12 mm
(2 pcs)
22 mm
(4 pcs)
32 mm
(4 pcs)
Select the screws, washers and spacers that best fit the
contours of your screen.
Screw the Screen Mount and the VESA mount (not
supplied) to the screen as illustrated, using the ideal
spacer length for the uppermost screws.
8
Screen
Screen
Top of the Screen
7
Screen
Screen

11
Tilt the hinge on the PanaCast 50 for easy access
to the screw holes.
9
10 Mount the PanaCast 50 to the Screen Mount using
the supplied M5x12 screws and a 4 mm hex key.
M5x12

12
11 Rotate the PanaCast 50 into its final position and
angle the camera to point at eye-level.