Jackson MSC JP-24BPNSU User manual

DISHWASHING MACHINE
JP-24BPNSU
TECHNICAL MANUAL
DESCRIPTION, OPERATION, INSTALLATION
AND MAINTENANCE INSTRUCTIONS
June 22, 2000 P/N 7610-002-38-50
Visit Jackson on the Internet at:
www.jacksonmsc.com
HIGH TEMPERATURE SANITIZING
UNDERCOUNTER UNIT
460 VOLT - 60 HERTZ - 3 PHASE

MANUFACTURERS WARRANTY
ONE YEAR LIMITED PARTS & LABOR WARRANTY
ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM
DEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1)
ONE YEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM
THE DATE OF SHIPMENT FROM THE FACTORY.
Jackson MSC agrees under this warranty to repair or replace , at its discretion, any original part which fails under normal use due to faulty
material or workmanship during the warranty period, providing the equipment has been unaltered, and has been properly installed, main-
tained and operated in accordance with the applicable factory instruction manual furnished with the machine and the failure is reported to
the authorized service agency within the warranty period. This includes the use of factory specified genuine replacement parts, pur-
chased directly from a Jackson authorized parts distributor or service agency. Use of generic replacement parts may create a hazard and
void warranty certification.
The labor to repair or replace such failed part will be paid by Jackson MSC, within the continental United States, Hawaii and Canada, dur-
ing the warranty period provided a Jackson MSC authorized service agency, or those having prior authorization from the factory, performs
the service. Any repair work by persons other than a Jackson MSC authorized service agency is the sole responsibility of the customer.
Labor coverage is limited to regular hourly rates, overtime premiums and emergency service charges will not be paid by Jackson MSC.
Accessory components not installed by the factory carry a (1) one year parts warranty only. Accessory components such as table limit
switches, pressure regulators, pre rinse units, etc. that are shipped with the unit and installed at the site are included. Labor to repair or
replace these components is not covered by Jackson MSC.
This warranty is void if failure is a direct result from shipping, handling, fire, water, accident, misuse, acts of god, attempted repair by
unauthorized persons, improper installation, if serial number has been removed or altered, or if unit is used for purpose other than it was
originally intended.
TRAVEL LIMITATIONS
Jackson MSC limits warranty travel time to (2) two hours and mileage to (100) one hundred miles. Jackson MSC will not pay for travel
time and mileage that exceeds this, or any fees such as those for air or boat travel without prior authorization.
WARRANTY REGISTRATION CARD
The warranty registration card supplied with the machine must be returned to Jackson MSC within 30 days to validate the warranty.
REPLACEMENT PARTS WARRANTY
Jackson replacement parts are warranted for a period of 90 days from the date of installation or 180 days from the date of shipment from
the factory, which ever occurs first.
PRODUCT CHANGES AND UPDATES
Jackson MSC reserves the right to make changes in design and specification of any equipment as engineering or necessity requires.
THIS IS THE ENTIRE AND ONLY WARRANTY OF JACKSON MSC. JACKSON’S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUD-
ING NEGLIGENCE, WITH RESPECT TO THE GOODS OR SERVICES COVERED HEREUNDER, SHALL IN NO CASE EXCEED THE
PRICE OF THE GOODS OR SERVICES OR PART THEREOF WHICH GIVES RISE TO THE CLAIM.
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING FOR FITNESS OR MERCHANTABILITY, THAT ARE NOT
SET FORTH HEREIN, OR THAT EXTEND BEYOND THE DURATION HEREOF. UNDER NO CIRCUMSTANCES WILL JACKSON MSC
BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, OR FOR THE DAMAGES IN THE NATURE OF PENAL-
TIES, ARISING OUT OF THE USE OR INABILITY TO USE ANY OF ITS PRODUCTS.
ITEMS NOT COVERED
This warranty does not cover cleaning or deliming of the unit or any component such as, but not limited to, wash arms, rinse arms or
strainers at anytime. Nor does it cover adjustments such as, but not limited to, timer cams, thermostats or doors, beyond 30 days from
the date of installation. In addition, the warranty will only cover the replacement of wear item such as curtains, drain balls, door guides or
gaskets during the first 30 days after installation. Also not covered are conditions caused by the use of incorrect (non-Commercial) grade
detergents, incorrect water temperature or pressure, or hard water conditioners.

APPROVAL DATA FOR:
TITLE OF MANUAL: DESCRIPTION, OPERATION, INSTALLATION, AND MAINTENANCE INSTRUCTIONS FOR DISH-
WASHING MACHINE, MODEL JP-24BPNSU
APPROVAL AUTHORITY:(LETTER OF APPROVAL FROM PROCURING ACTIVITY
CONTRACT NO. NSN NO. OF UNITS CID/APL
DLA-400-90-M-1376 7320-01-144-2638 1432100007
REMARKS:
DATE:
CERTIFICATION:
IT IS HEREBY CERTIFIED THAT THE TECHNICAL MANUAL PROVIDED UNDER CONTRACT NUMBER DLA-400-90-
M-1376 FOR DISHWASHING MACHINE, MODEL JP-24BPNSU, HAS BEEN APPROVED BY THE APPROVAL DATA SHOWN
ABOVE.
(TITLE OF COMPANY OFFICIAL)
COMPANY’S NAME
COMPANY’S ADDRESS
COMPANY’S FSCM
APPROVAL AND PROCUREMENT RECORD
i

1. PURPOSE: This technical publication is issued for the purpose of identifying and authorizing the following commercial manual for
Navy use.
MANUFACTURER: Jackson MSC Inc., Barbourville, Kentucky 40906
PURCHASE ORDER OR CONTRACT NO.: DLA-400-90-M-1376
EQUIPMENT: Dishmachine, Model JP-24BPNSU
ADDITIONAL IDENTIFICATION (if any): Not applicable
DATE: 1 January 1991
2. ADDITIONAL COPIES: Additional copies are available from:
DGSG-SDA
Richmond, Virginia 23297
IDENTIFYING TECHNICAL PUBLICATION SHEET
iii

GENERAL PAGE
Specifications ............................................................................................... 1
Detail of Data Plate....................................................................................... 2
General Notes............................................................................................... 3
INSTALLATION
Unpacking..................................................................................................... 4
Plumbing Connections.................................................................................. 4
Electrical Connections.................................................................................. 4
Deck Mounting of the Dishmachine............................................................. 5
Detergent Control.......................................................................................... 6
Installation Checklist..................................................................................... 7
OPERATIONAL START-UP & CHECK
Preparation................................................................................................... 8
Power Up...................................................................................................... 8
Initial Fill........................................................................................................ 8
DAILY OPERATION
Preparing the Dishes.................................................................................... 8
Daily Machine Preparation............................................................................ 8
Washing a Rack of Ware.............................................................................. 8
Shut Down and Cleaning.............................................................................. 8
TROUBLESHOOTING................................................................................................ 9
SERVICE PROCEDURES.......................................................................................... 13
DIMENSIONS.............................................................................................................. 14
PHOTOGRAPHS
Main Assembly Front View........................................................................... 15
Main Assembly Rear View........................................................................... 16
Control Panel Assembly............................................................................... 18
Incoming Plumbing Assembly...................................................................... 19
Motor Assembly............................................................................................ 20
Wash and Rinse Arm Assembly................................................................... 21
Booster Tank Assembly................................................................................ 22
Valve Assembly............................................................................................ 23
Complete Door Assembly............................................................................ 24
Kick Plate Assembly..................................................................................... 26
Control Panel ............................................................................................... 27
Inside View Assembly.................................................................................. 28
Right Side View Assembly........................................................................... 29
Left and Right Side Panels.......................................................................... 31
SCHEMATIC.............................................................................................................. 32
TMDER SHEETS....................................................................................................... 33
JACKSON MAINTENANCE AND REPAIR CENTERS............................................ 37
IMPORTANT INFORMATION DATA SHEET............................................................ 44
TABLE OF CONTENTS
iv