Jacobsen 63280 PGM 22 User manual

When Performance Matters.
™
PGM 22
InCommand™
63280 – PGM 22, 11 Blade Reel
63286 – PGM 22, 15 Blade Reel
WARNING
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
4131595-GB-Rev A
Technical Manual
RJL 100 August 2014
GB
United
Kingdom

© 2010, Jacobsen, A Textron Company/Textron Innovations Inc.
“All rights reserved, including the right to reproduce this material
or portions thereof in any form.”
This manual contains safety, operating, adjustment,
maintenance, troubleshooting instructions and parts list
for your new Jacobsen machine. This manual should be
stored with the equipment for reference during operation.
Before you operate your machine, you and each operator
you employ should read the manual carefully in its
entirety. By following the safety, operating and
maintenance instructions, you will prolong the life of your
equipment and maintain its maximum efficiency.
If additional information is needed, contact your
Jacobsen Dealer.
The serial plate is located on the rear crossbar of the
frame. Jacobsen recommends you record these numbers
below for easy reference.
11524WILMAR BLVD,
CHARLOTTE,NC 28273
®
kg kW
1-800-848-1636 (US)
PRODUCT OF U.S.A. A Textron Company
2
Proposition 65 Warning
This product contains or emits
chemicals known to State of California
to cause cancer and birth defects or
other reproductive harm.
FOREWORD
Suggested Stocking Guide
To Keep your Equipment fully operational and productive, Jacobsen suggests you maintain a stock of the more
commonly used maintenance items. We have included part numbers for additional support materials and training aids.
To order any of the following material:
1. Write your full name and complete address on your
order form.
2. Explain where and how to make shipment:
❑UPS ❑Regular Mail
❑Overnight ❑2nd Day
3. Order by the quantity desired, the part number, and
the description of the part.
4. Send or bring the order to your authorized Jacobsen
Dealer.
LITHO IN U.S.A. 9-2014
Service Parts
Service Support Material
Qty. Part No. Description Qty. Part No. Description
5002605 11 Blade Reel 164056 Brake Band
503477 22” High Profile Bedknife 366648 Seal, Grease
503478 22” Low Profile Bedknife 3006511 Washer
503479 22” Tournament Bedknife 337677 Seal, Oil
5002887 22” Super Tournament Bedknife
Qty. Part No. Description
4131595 Technical Manual
4191633 Operator Training Video 4171663 Service Manual
Qty. Part No. Description
These are the original instructions verified by
Jacobsen, A Textron Company.

3
> Change from previous revision
Table of Contents
1 Safety
1.1How to Operate Safely.............................................. 4
1.2 Important Safety Notes .........................................7
2 Specifications
2.1 Product Identification............................................ 8
2.2 Engine ..................................................................8
2.3 Mower ...................................................................8
2.4 Traction and Differential .......................................8
2.5 Weight ..................................................................9
2.6 Accessories ..........................................................9
2.7 Declaration of Conformity ...................................10
2.8 Vibration Level ....................................................13
3 Decals
3.1 Decals ................................................................ 14
4 Initial Inspection
4.1 General............................................................... 15
4.2 Initial Inspection ..................................................15
5 Controls
5.1 Icons................................................................... 16
5.2 Controls ..............................................................16
6Operation
6.1 Daily Inspection.................................................. 18
6.2 Operator Presence Control ................................18
6.3 Operating Procedures ........................................19
6.4 Starting/Stopping Engine ....................................20
6.5 Transport Wheels (Optional Kit 62293) ..............21
6.6 Grass Catcher ....................................................21
6.7 Mowing ...............................................................22
6.8 Daily Maintenance ..............................................23
7 Adjustments
7.1 General .............................................................. 24
7.2 Reel-To-Bedknife ...............................................24
7.3 Bedknife .............................................................25
7.4 Brake ..................................................................25
7.5 Cutting Height ....................................................26
7.6 Handle ................................................................26
7.7 Torque Specification ..........................................27
8 Maintenance
8.1 General .............................................................. 28
8.2 Engine ................................................................28
8.3 Engine Oil ...........................................................29
8.4 Fuel ....................................................................29
8.5 Bedknife Shoe Removal .....................................30
8.6 Backlapping And Grinding ..................................30
8.7 Transport Tires (Option) .....................................30
8.8 Wheel Bearing ....................................................31
8.9 Storage ...............................................................31
8.10 Troubleshooting .................................................32
8.11 Lubrication ..........................................................33
8.12 Maintenance Chart .............................................33
9Notes
10 Parts Catalog
10.1 How To Use The Parts Catalog ......................... 35
10.2 To Order Parts ...................................................35
10.3 Parts Catalog Table of Contents ........................35

1 SAFETY
4
1 SAFETY
1.1 HOW TO OPERATE SAFELY
SAFE OPERATION
a Read the Operator’s Manual and other training
material. If the operator or technician can not read
this manual, the owner is responsible to describe
this material to the operators and technicians.
Manuals in additional languages may be available
on the Jacobsen or RansomesJacobsen website.
a Read all of the instructions for this mower carefully.
Know the controls and the correct operation of the
equipment.
b Children or persons who do not understand these
instructions must not use the mower. The local
regulations can limit the age of the operator.
c Never use a mower near persons, including
children or animals.
d Remember that the operator or owner is
responsible for accidents or hazards that occur to
other persons or their property.
e Never carry passengers.
f Never allow persons to operate or service the
mower or its attachments without correct
instructions.
g Do not operate equipment while tired, sick or after
you use alcohol or drugs.
PREPARATION
a When you operate the mower, wear correct
clothing, slip resistant work shoes or boots, work
gloves, hard hat, safety glasses and hearing
protection. Long hair, loose clothing or jewelry can
be caught in moving parts.
b Do not operate the equipment with the Interlock
System disconnected or the system does not
operate correctly. Do not disconnect or prevent the
operation of any switch.
c Never operate equipment that is not in correct
order or without decals, guards, shields, deflectors
or other protective devices fastened.
d Inspect the mower before you operate the mower.
Check the tire pressure, engine oil level, the
radiator coolant level and the air cleaner indicator.
Fuel is flammable. Use caution when you add the
fuel to the mower.
e Operate the mower in daylight or in good artificial
light. Use caution when you operate the mower
during bad weather. Never operate the mower with
lightning in the area.
f Inspect the area to select the accessories and
attachments that are needed to correctly and safely
do the job. Only use parts, accessories and
attachments approved by Jacobsen.
g Be careful of holes in the terrain and other hazards
that are not visible.
h Inspect the area where the equipment is operated.
Remove all objects you can find before you
operate. Be careful of obstructions above the
ground (low tree limbs, electrical wires) and also
underground obstacles (sprinklers, pipes, tree
roots). Enter a new area carefully. Look for possible
hazards.
i Inspect the cutting system before you start the
mower. Make sure the blades are free to rotate.
When you rotate one blade, other blades can
rotate.
OPERATION
a Never operate the engine without enough
ventilation or in an enclosed area. The carbon
monoxide in the exhaust fumes can increase to
dangerous levels.
b Never carry passengers. Keep other persons or
animals away from the mower.
c Disengage all drives and engage the parking brake
before you start the engine. Only start the engine
with the operator in the seat. Never start the engine
with persons near the mower.
d Keep your legs, arms and body inside the operator
compartment while the mower is in operation. Keep
your hands and feet away from the cutting units.
WARNING
EQUIPMENT OPERATED INCORRECTLY OR WITHOUT TRAINING CAN BE DANGEROUS.
Know the location and correct operation of controls. Operators without experience must receive instruction from
another person that knows the correct operation of the equipment before you operate the mower.
Only use parts, accessories and attachments approved by Jacobsen.
!

SAFETY 1
5
e Do not use on the slopes greater than the safe
slope limit for the equipment.
f To guard against over turning or loss of control:
– Operate the mower across the face (horizontally),
but not up and down on the face of slopes
(vertically).
– Do not start or stop suddenly on slopes.
– Decrease the speed when you operate on slopes
or when you must turn. Use caution when you
change direction. Turf condition can change the
mower stability.
– Use caution when you operate the mower near
drop-offs, ditches or embankments.
– Be careful of holes in the terrain and other hazards
that are not visible.
g Always operate at speeds that allow you to have
complete control of the machine. Make sure of your
footing keep a tight grip the handle and walk. Never
run when you operate the mower.
h Use caution when you go near corners, trees or
other objects that can prevent a clear view.
i Equipment must meet the current regulations to be
driven on the public roads.
j Before you move across or operate on the paths or
roads, turn off the PTO switch, lift the mowers and
travel at decreased speed. Look for traffic.
k Stop the blades when the mower is on any surface
that is not grass.
l Do not release the cut grass in the direction of
persons or allow persons near the mower while in
operation.
m Do not operate the mower with damaged guards or
without safety devices in position.
n Do not change the engine governor setting or over-
speed the engine. Never change or tamper with
adjusters that are closed with a seal for the engine
speed control.
o Before you leave the operator compartment, for
any reason:
– Disengage all the drives and lower attachments to
the ground.
– Engage the parking brake.
– Stop the engine and remove the key.
p When you hit an object or mower starts to cause
the vibration that is not normal, inspect the mower
for damage and make repairs.
q Decrease the throttle setting before you stop the
engine.
r Do not use this equipment for uses that the mower
was not made for.
SAFE HANDLING OF FUELS
a The fuel and the fuel vapors are flammable. Use
caution when you add the fuel to the mower. The
fuel vapors can cause an explosion.
b Never use the containers that are not approved to
keep or transfer fuel.
c Never keep the mower or fuel containers near an
open flame or any device that can cause the
ignition of fuel or fuel vapors.
d Never fill the fuel containers inside a vehicle or on a
truck or trailer with a plastic liner. Always put the
fuel container on the ground away from your
vehicle before you fill the container.
e Refuel the mower before you start the engine.
When the engine is in operation or while the engine
is hot, never remove the fuel cap or add fuel to the
mower.
f Refuel outdoors only and do not smoke when you
add fuel. Extinguish all types of ignition.
g The fuel nozzle must touch the rim of the fuel tank
when you add fuel to the mower. Do not use a
device to lock the fuel nozzle in the open position.
h Do not over fill the fuel tank. Leave at least 1 inch
(2.5 cm) below the filler neck.
i Always tighten the fuel tank cap and container cap
after you add fuel.
j If the fuel spills on your clothing, change your
clothing immediately.
MAINTENANCE AND STORAGE
a Before you clean, adjust or repair this equipment,
stop the engine and disconnect the spark plug
wire. Keep the wire away from the plug to prevent
the engine to start.
b Make sure the mower is parked on a solid and level
surface.
c Never work on a mower that is lifted only by the
jack. Always use the jack stands.
d Never allow persons to service the mower or its
attachments without correct instructions.
e When the mower is parked, put into storage or left
without an operator, lower the cutting device unless
a positive mechanical lock is used.

1 SAFETY
6
f When you put the mower on a trailer or put the
mower in storage, close the fuel valve. Do not keep
fuel near flames or drain the fuel inside a building.
g Disconnect the battery before you service the
mower. Always disconnect the negative battery
cable before the positive battery cable. Always
connect the positive battery cable before the
negative battery cable.
h Charge the battery in an area with good airflow.
The battery can release hydrogen gas that is
explosive. To prevent an explosion, keep any
device that can cause sparks or flames away from
the battery.
i Disconnect the battery charger from the power
supply before you connect or disconnect the
battery charger to the battery. Wear protective
clothing and use insulated tools when you service
the battery.
j Be careful and wear gloves when you check or
service the cutting unit blades. Replace any
damaged blades, do not try to correct a damaged
blade.
k Keep your hands and feet away from parts that
move. Do not adjust the mower with the engine in
operation, unless the adjustment needs the engine
in operation.
l Carefully release the pressure from components
with stored energy.
m Keep the mower and the engine clean.
n Allow the engine to become cool before storage
and always remove the ignition key.
o Keep all nuts, bolts and screws tight to make sure
the equipment is in safe condition.
p Replace worn or damaged parts for safety.
Replace damaged or worn decals. Only use parts,
accessories and attachments approved by
Jacobsen.
q To decrease the fire hazard, remove materials that
burn from the engine, muffler, battery tray and fuel
tank area.
r Disconnect the battery and controller connectors
before you weld on this mower.
WHEN YOU PUT THE MOWER ON A
TRAILER
a Be careful when you load or unload the mower on
a trailer. Trailer must be wider than the mower and
can carry the weight of the mower.
b Use a full-width ramp to load or unload the mower
on a trailer.
c Use straps, chains, cables or ropes to fasten the
mower to the trailer. Both front and rear straps
must be sent down and toward sides of trailer.
d Make sure that all latches are correctly fastened.

SAFETY 1
7
1.2 IMPORTANT SAFETY NOTES________________________________________________
This safety alert symbol is used to alert you to potential hazards.
DANGER - Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
WARNING - Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious
injury.
CAUTION - Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury
and property damage. It may also be used to alert against unsafe practices.
NOTICE - Indicates a potentially hazardous situation which, if not avoided, MAY result in property damage. It may
also be used to alert against unsafe practices.
For pictorial clarity, some illustrations in this manual may show shields, guards or plates open or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place.
By following all instructions in this manual, you will prolong the life of your machine, and maintain its maximum
efficiency. Adjustments and maintenance should always be performed by a qualified technician.
If additional information or service is needed, contact your Authorized Jacobsen who is kept informed of the latest
methods to service this equipment and can provide prompt and efficient service.
WARNING
The Operator Presence Control (OPC) on this machine will shut off the reel
and traction drive if the operator releases the OPC bail.
To protect the operator and others from injury, never operate equipment with
the OPC system disconnected or malfunctioning.
!
WARNING
1. Before leaving the operator’s position for any reason:
a. Disengage all drives.
b. Engage parking brake.
c. Stop engine.
2. Keep hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust or service the machine.
3. Keep the area of operation clear of all bystanders and pets.
4. Chock or block the wheels if the machine is left on an incline.
5. Never operate mowing equipment without the discharge deflector
securely fastened in place.
!

2 SPECIFICATIONS
8
2 SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION_________________________________________________
63280.........22 in., (55.9 cm) 11 Blade Professional
Greens Mower with InCommand™ control
system, 4.0 H.P. gasoline engine (Honda),
Operator Presence Control, grass catcher,
brakes, and kickstand.
63286.........22 in., (55.9 cm) 15 Blade Professional
Greens Mower with InCommand™ control
system, 4.0 H.P. gasoline engine (Honda),
Operator Presence Control, grass catcher,
brakes, and kickstand.
Serial Number ................An identification plate, like the one
shown, listing the serial number, is
attached to the right side frame.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2 ENGINE__________________________________________________________________
Engine ....................... HondaGX-120K1QJG24-Cycle,
4 HP (2.98 kW) at 4000 RPM
Speed ........................ High Idle - 3300 + 100 RPM
Low Idle - 1700 + 100 RPM
Fuel............................ Regular Grade (Unleaded)
Fuel Tank................... 0.66 Gallon (2.5 liter)
Use clean, fresh, regular unleaded gasoline, 85 octane
minimum. When using blended fuel, do not use a blend
with more than 10% ethanol.
Under no circumstances should you use a blend with
methanol.
Engine Oil . . . . . . . . . Capacity: 5/8 qt. (0.6 l)
Type: SAE 10W-30, API Classifi-
cation SF or SG
2.3 MOWER _________________________________________________________________
Height of cut ................. 5/64 to 7/16 in., (0.2 to 1.1 cm)
Bedknives..................... Hardened carbon steel
High profile ................... yields 5/32 in., (0.4 cm) cut.
Low profile.................... yields 7/64 in., (0.28 cm) cut.
Tournament................... yields 5/64 in., (0.2 cm) cut.
Super Tournament ..........Yields 1/16 in. (0.16 cm) cut
Cutting Frequency.........13/64 in., (0.5 cm)
Reel...............................11 or 15 blades, 5 in., (12.7 cm)
diameter hardened high
manganese, carbon steel
Reel Clutch....................Separate Cog-type
Reel Reduction Ratio ....2.25:1
Width of cut ...................22 in., (55.9 cm)
2.4 TRACTION AND DIFFERENTIAL _____________________________________________
Drive Clutch.........................Centifugal, Engages at 2000
RPM
Traction Reduction Ratio.....24:1
Traction and Reel Drive.......Chain drive
Transport Wheels ................(2) bidirectional, pneumatic
11 x 4 Goodyear Softrac
Tire Pressure.......................6 to 8 psi (0.41 to 0.55 BAR)
Differential ...........................Full automotive type,
housed in traction drum
Rear Drive Drum .................Machinedaluminumalloy
2 sections: 7-3/4 in., (O.D.) x
10.97 in., (19.7 x 27.8 cm)
Travel Speed .......................2.9 mph (4.7 km/h) @ 3000
rpm
11524WILMAR BLVD,
CHARLOTTE,NC 28273
®
kg kW
1-800-848-1636 (US)
PRODUCT OF U.S.A. A Textron Company
85 2.6 XXXX
62380001651

SPECIFICATIONS 2
9
2.5 WEIGHT__________________________________________________________________
Weight (Mass)
11 Blade PGM 22................187 lb., (85 kg) with catcher,
roller, kickstand.
15 Blade PGM 22 ............... 194 lb., (88 kg) with catcher,
grooved steel roller,
kickstand.
2.6 ACCESSORIES____________________________________________________________
Contact your area Jacobsen Dealer for a complete listing of accessories and attachments.
Accessories
PGM MagKnife Conversion Kit ...........................4131020
Pneumatic Transport Tires......................................62293
Front Gear Drive .....................................................68557
Front Roller Brush...................................................68536
Grass Catcher.........................................................68121
Guide Wheels .........................................................68612
Height of Cut Gauge .............................................158568
Lapping Compound (120 grit) ...5002489 - 10 Pound Pail
5002491 - 25 Pound Pail
Light Kit...............................................................5002962
Orange Paint (12 oz. spray)..................................554598
Push Brush .............................................................68500
Smooth Roller with Scraper ....................................68530
Soft Touch Rotary Brush (Requires 68557) ............68560
Solid tube Roller with Scraper.................................68641
Turf Groomer...........................................................68579
Vertical Reel ...........................................................68556
2-1/2 Gallon Fuel Can...........................................554948
5-1/4 Gallon Fuel Can...........................................554949
Mower Caddy PGM Latch Kit..................................68652
Mower Caddy..........................................................68648
Solid Roller
Solid tube Roller with Scraper.................................68641
Grooved Roller
Grooved Assembled Disc Roller.............................68527
Grooved Machined Aluminum Roller......................68614
Grooved Machined Steel Roller..............................68613
Support Literature
Technical Manual................................................4131595
Operation Training Video....................................4191633
Service Manual...................................................4171663
CAUTION
Use of other than Jacobsen authorized parts and accessories may cause personal injury or damage to the
equipment.
!

2 SPECIFICATIONS
10
2.7 DECLARATION OF CONFORMITY____________________________________________
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󳵖󱘸󲉗󱬠󲠾󰀼󰀼󵊙󱘸󱷓󴰰󰀼
󺅗󺺿󹪇󹩶󹼎󹩲󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󱑦󵉐󱝶󳢴󱝶󱁊󱘽󳰠󱚼󱶼󲞤󱥠󱥰󰀼
󰀼󱝶󱘧󰇎󰈌󰇷󰉟󰉺󰈩󰉺󰇲󲶓󲄿󱅿󲑰󰀼󺅲󺇆󺃦󺂮󹨗󺾎󹏛󹕥󺉒󹫢󰀼󰀼

Jacobsen, A Textron Company
11524 Wilmar Blvd.
Charlotte, NC 28273, USA
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󱃗󱛱󱄓󳨱󰀼󰀼
󴬭󱛱󰈱󰉺󰉇󰀼󺅲󺷞󺢪󸸲󰀼󰀼
63280
63286
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󲥪󱢘󱘽󳰠󰀼󰀼󲲏󲫠󱘽󰀼󸞆󸞆󹏛󺟃󰀼󰀼
PGM 22, 11 Blade
PGM 22, 15 Blade
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󱘽󳰠󰀼󰀼󳝘󵉄󰀼󺌖󺅫󰀼󰀼 Lawnmower, Article 12, Item 32
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󲂿󱑇󱘧󰀼
󰀼󰈵󰉨󰈠󰉩󳞚󱘧󰀼󺃒󹅾󹗞󺾎󰀼󰀼
6328003000-6328004500
6328601601-6328602500
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󱘁󱓘󲥪󰀼󰀼󰈦󰉱󰈶󰉱󰀼󹼪󺌚󰀼󰀼 Honda GX-120 Gas
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󴫵󲥪󱏰󱓏󳖷󰀼󰀼󲙝󵄹󰇝󰈏󲶓󱚣󱐪󱓋󰀼󺅫󹕎󺛲󹅻󰀼󰀼
2,98 kW @ 3300 RPM
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼󰀼󱒚󴕹󱷭󲃖󰀼
󰀼󱐸󰈎󱘆󰈎󲁵󰀼󺅞󸰾󺵃󰀼󰀼
55,9 cm
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󳵖󱘸󲔷󱄔󰀼󰀼󵊙󱘸󲔷󱄔󰀼
󸜲󺅫󺉖󹭮󰀼󰀼
2004/108/EC
2006/42/EC
2000/14/EC, 2005/88/EC
2006/66/EC
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󳵖󱘸󲉗󴷴󱅠󰀼󰀼󵊙󱘸󲉗󴲅󱇑󰀼󺅗󺺿󹪇󺴟󸕖󰀼
󰀼
2006/42/EC Annex VIII
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󲽻󲇇󱬠󱓏󳖷󴃗󰀼󰀼󵨣󱐪󱓋󰉪󰉗󰉩󳁜󱷊󱉔󰀼󺝷󺅫󸵲󺂢󺻻󺱢󺀢󹅞󹗾󰀼
󰀼
95 dB(A) ± 1.70 LWA
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󱈍󴷱󱬠󱓏󳖷󴃗󰀼
󰀼󵨣󱐪󱓋󱈍󴱬󰉪󰉗󰉩󰀼󹙊󺃻󸵲󺂢󺻻󺱢󺀢󹅞󹗾󰀼󰀼
97 dB(A) LWA

SPECIFICATIONS 2
11
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󳵖󱘸󲉗󴷴󱅠󳰻󲂿 󰦅󱢚󱬠󰦆󰀼󰀼󵊙󱘸󲉗󴲅󱇑󰇲󲑻󵨶 󰦅󵱂󵨣󰦆󰀼󺅗󺺿󹪇󺴟󸕖󺅞󺕾  󹫢󺂢 󰀼
󰀼
2000/14/EC Annex VI, Part 1
󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󴔡󱤭󴷔󴷱󲥪󲦴󰀼󰀼
󰦅󴔡󱤭󰦆󱎜󴲽󲲏󵟒󰆍󰀼 󹼦󸱖󺺲󹽗󸛃󺃎󺋳󸞆󸙖󰀼󰀼

Number: 1088
Sound Research Laboratories Limited
Holbrook House, Little Waldingfield
Sudbury, Suffolk CO10 0TH
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󲛽󱆌󱚈󴉣󲟱󱢚󱬠󴃗󰀼󰀼󰈨󰉘󰉪󰉺󰈽󰇐󲍏󰇜󰈏󵱂󵨣󰉪󰉗󰉩󰀼
󹨂󹿿󺃦󺘃󸕗󹫢󺂢󹅞󹗾󰀼󰀼
83 dB(a) Leq ± 1.70 (2006/42/EC)
82 dB(a) Leq ± 1.70 (2006/42/EC)
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󲑰󵏷󳝘󳢴󱕿󴸳󲨷󱏶󰀼󰀼󲞤󱘸󴮿󲩬󰀼
󺅗󹿿󸵮󸯪󺇆󺾪󺶲󺉖󰀼󰀼
BS EN ISO 20643
BS EN ISO 5349-1
BS EN ISO 5349-2
BS EN ISO 5395-3
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼 󰀼
󰀼󰀼󰀼󰀼
󲑰󵏷󳝘󳢴󲒰󲥟󲨷󱏶󱚼󴯴󴔳󰀼󰀼󲒰󴪃󴮿󲩬󰇎󰈌󰇷󱄅󲰈󲤨󰀼󺅗󹿿󸵮󸯪󸞆󹭶󺶲󺉖󹕥󸜲󸗿󰀼
󰀼
B71.4
ISO 2631-1
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼
󰀼󰀼󱬠󲠾󳢴󱥠󳋩󱀾󲠕󲥏󰀼󰀼󱷓󴰰󱩤󲑰󰇎󰈌󰇷󲠕󱄈󰀼
󹩶󹼎󺃻󹫢󹕥󺃒󺃦󰀼󰀼
Jacobsen, A Textron Company
11524 Wilmar Blvd.
Charlotte, NC 28273, USA
September 2nd, 2014

2 SPECIFICATIONS
12

















































󴗧󲇇󲖸󲥳󱄓󴪘󱑦󵉐󱝶󴾧󴕹󱬠󲠾󴈵󳢴󳶮󱘽󰦉󲶔󱃪󱈍󳞉󲒰󲥟󲞷󲪓󲂦󴗧󲖸󲥳󴅆󴸁󲒰󲥟󲞷󱄦󰦉󱁄󲡟󳭮󱕪󱁝󴗧󲇇󴷔󱘟󴈵󰆎


󰉟󰉺󰈩󰉺󰈖󱄓󴪘󰇛󰇪󱷓󴰰󲤨󰈖󴾧󴕹󰇛󰆍󲒰󴪃󲞷󲤨󰈖󱈍󲤹󰇛󲒰󴪃󰉓󰈟󰈢󰉩󰈖󴀘󵣶󰇝󰈏󲱙󵢀󰈖󲤹󰇛󰆍󱥠󱨏󰇯󰇎󰇈󰇪󳫪󱤪󰇣󰈏󱥠󱅽󰈖󳷹󰇈󰇪󰇈󰈏󱃪󳒙󰇲󴆢󱘽󰆎
󺅲󺇆󺃦󹋒󸱖󹰶󺺮󹽂󹩶󹼎󹩲󹋒󺃧󹪇󺺮󸴚󹆳󺁚󺃚󹕱󺂖󹩲󹏛󺃦󸯪󸞆󹭶󹒎󹩲󹋒󹙊󺁶󺺮󸘶󸞆󹭶󺃦󹈢󹭮󺌧󺂮󺼞󸕖󹋒󹕱󹺮󺂒󹏆󺌖󹽃󸙋󸴯󺘊󸨊󹼦󹫣󺻊󺃞󹰋󸰞󸰺




2006/42/EC Annex II 1.A.2
Christian D. Clifford
Senior Engineering Manager
Ransomes Jacobsen Limited
West Road, Ransomes Europark,
Ipswich, IP3 9TT, England
2006/42/EC Annex II 1.A.10
Derek Mookhoek
Director of Engineering
Jacobsen, A Textron Company
11524 Wilmar Blvd,
Charlotte, NC 28273, USA
󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󰀼󰀼󰀼
󰀼󰀼󰀼󰀼󴷱󱂖󴅆󱘧󰀼󰀼󴲽󴱬󳞚󱘧󰀼󺃎󺋳󹗞󺾎󰀼󰀼

4131595 Rev B
GB
United
Kingdom
BE
Belgium
BG
Bulgaria
CH
Switzerland
CN
China
CY
Cyprus
CZ
Czech
Republic
DE
Germany
DK
Denmark
EE
Estonia
ES
Spain
FI
Finland
FR
France
GR
Greece
HU
Hungary
IS
Iceland
IT
Italy
JP
Japan
KR
Korea
LI
Liechenstein
LT
Lithuania
LV
Latvia
MT
Malta
NL
Netherlands
NO
Norway
PL
Poland
PT
Portugal
RO
Romania
RU
Russia
SE
Sweden
SI
Slovenia
SK
Slovakia
TR
Turkey
UA
Ukrain

SPECIFICATIONS 2
13
2.8 VIBRATION LEVEL_________________________________________________________
When the machine was tested for hand/arm vibration levels, the operator was standing in the normal operating position
with both hands on the handle. The engine was running and the cutting device was rotating with the machine
stationary.
The Machinery Safety Directive 2006/42/EC
By compliance to:
The Lawnmower Standard EN836:1997
Referenced to Hand/Arm: BS EN ISO20643:2008
Information Supplied for Physical Agents Directive 2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2001)
PGM 22
Hand/Arm
Acceleration
Level
63280 PGM 22, 11 Blade
63286 PGM 22, 15 Blade
Maximum Left Hand or Right Hand Accelerations m/s2
Mean Value of X, Y, Z Aeq
2.53 ± 1.3

3 DECALS
14
3 DECALS
3.1 DECALS _________________________________________________________________
Familiarize yourself with the decals, they are critical to the safe operation of the mower.
REPLACE DAMAGED DECALS IMMEDIATELY.
TO PREVENT INJURY AND ACCIDENTAL
CLUTCH ENGAGEMENT DO NOT ADJUST
ENGINE SPEED USING THROTTLE LEVER
ON ENGINE. ALWAYS ADJUST ENGINE
SPEED USING THE OPC HANDLE AND
THROTTLE PADDLE
ALLOW ENGINE
TO COOL FOR 2
MINUTES BEFORE
REFUELING
!CAUTION
362764
BE SURE THE TRACTION CLUTCH
LEVER IS IN NEUTRAL BEFORE
STARTING THE ENGINE.
CAUTION
!CAUTION
1. Read operator’s manual before operating
machine.
2. Keep shields in place and hardware
securely fastened.
3. Before you clean, adjust or repair this
equipment, disengage all drives, engage
parking brake and stop engine.
4. Keep hands, feet and clothing away from
moving parts.
5. Never carry passengers.
6. Keep bystanders away. 361854
To avoid serious bodily injury stop engine
and disengage reels before working on
mower or emptying baskets.
!DANGER
3001235
1. No opere esta maquina sin previo
entrenamiento, instruccion y sin haber
leido el manual de operacion.
2. Tenga todas las guardas en su lugar y
plezas bien aseguradas.
3. Neutralice todas las velocidades y
apague el motor antes de vaciar los
recolectores de pasto, darie servicio,
limplar, ajustar y destrabar la maquina.
4. Mantenga las manos, los ples y ropa
suelta lejos de plezas en movimiento.
5. No deberan transportar pasajeros si no
existe un asiento para ellos.
6. Si no sabe leer ingles, pida que aiguien
le lea las calcomanias de avisos y los
manuales de instruccion y operacion.
!PRECAUCION
340830
3001790
!WARNING
Keep Bystanders Away. DoModel 518A 95.3 kg
Model 522A 101.2 kg
Model 526A 123.4 kg
2811102
Model 522TA 100.7 kg
Model PGM 19 84.0 kg
Model PGM 22 85.0 kg
Vehicle Mass:
4127335
Model TC22 101.1 kg
Not Operate Without Guards
In Place
WARNING
4146636

INITIAL INSPECTION 4
15
4 INITIAL INSPECTION
4.1 GENERAL ________________________________________________________________
The set-up and testing of the unit should always be
performed by a trained technician, familiar with the
operation of the equipment.
Read each instruction completely and make sure you
understand it before proceeding with the assembly. Stay
alert for potential hazards and obey all safety
precautions.
The RIGHT, LEFT, FRONT, and REAR of the machine
are referenced from the operator’s position, facing
forward.
Accessories not included with this product must be
ordered separately. See instructions provided with
accessory for installation and parts.
This machine is shipped assembled. After unpacking,
perform the initial inspection, operating checks, and test
the Operator Presence Control (OPC).
4.2 INITIAL INSPECTION _______________________________________________________
1. Perform a visual inspection of the entire unit, look for
signs of wear, loose hardware, and components that
may have been damaged during transport.
2. Inspect paint and decals for damage or scratches.
Decals provide important operating and safety
information. Replace all missing or hard to read
decals.
3. Check that the engine oil level is at the full level
mark with the engine cold.
4. Visually check for fuel or oil leaks.
5. Inspect lube points for proper lubrication.
CAUTION
Do not attempt to operate the machine unless you are
familiar with this type of equipment and know how to
operate all controls correctly.
!
CAUTION
The initial inspection should be performed only when the engine is off and all fluids are cold. Disengage all drives,
engage parking brake, stop engine, and disconnect spark plug wire.
!
NOTICE
Mower is shipped without oil in the engine. To prevent
permanent damage, oil must be added before starting
engine. See Section 8.3 for oil specifications

5 CONTROLS
16
5 CONTROLS
5.1 ICONS___________________________________________________________________
5.2 CONTROLS ______________________________________________________________
A. Parking Brake – Used whenever the mower is left
unattended or as a service brake while transporting.
B. Paddle Throttle – Controls the speed of the engine
when OPC Bail is engaged. Push (+) side of lever to
increase engine speed. Push (-) side of lever to
decrease engine speed.
C. O.P.C. Bail – Engaging bail increases engine speed
which engages the centrifugal clutch. Release bail
to return engine to idle. The bail must be
disengaged to start the engine.
D. Engine Switch – The engine switch enables and
disables the ignition system. The engine switch
must be in the ON position for the engine to run.
Turning the engine switch to the OFF position stops
the engine.
Figure 5A
Figure 5B
Unlock
Lock
Fuel
Gasoline Choke
Engine Off Engine Run Fast Slow
Throttle
Operator Presence Control Engine
Engaged Disengaged
Parking Brake
WARNING
Never attempt to operate the machine unless you have read the Technical Manual, the
engine manual, and know how to operate all controls correctly.
Familiarize yourself with the icons shown above and what they represent. Learn the
location and purpose of all the controls before operating this mower.
!
C
B
A
H
OFF
ON
D

CONTROLS 5
17
E. Reel Clutch Lever – To disengage, turn handle (E)
to point downwards. Always disengage clutch when
mower is being transported.
F. Choke Lever - The choke lever opens and closes
the choke valve in the carburetor. The CLOSED
position enriches the fuel mixture for starting a cold
engine. The OPEN position provides the correct fuel
mixture for operation after starting, and for restarting
a warm engine.
G. Fuel Valve Lever - The fuel valve opens and closes
the connection between the fuel tank and the
carburetor. The fuel valve lever must be in the ON
position for the engine to run. When the engine is
not in use, leave the fuel valve lever in the OFF
position to prevent carburetor flooding and to reduce
the possibility of fuel leakage.
H. E-Stop - Used to stop the engine. Push switch
down to disable engine ignition, pull up for normal
operation.
Figure 5C
Figure 5D
WARNING
To prevent bodily injury or property damage, never
engage the reel clutch lever while the engine is
running or the O.P.C. bail is engaged.
DANGER
Keep hands and feet away from the cutting unit to
prevent serious cuts.
NOTICE
Before tipping mower back for adjustments, the fuel
lever must be moved to the OFF position to prevent
fuel from leaking into the crankcase.
!
!
E
ON
OFF
F
G

6 OPERATION
18
6 OPERATION
6.1 DAILY INSPECTION________________________________________________________
1. Perform a visual inspection of the entire unit, look for
signs of wear, loose hardware, missing, or damaged
components. Check for fuel or oil leaks.
2. Check the fuel supply and crankcase oil level. All
fluids must be at the full level mark.
3. Make sure the mower is adjusted to the required
cutting height.
4. Make sure the machine is lubricated and the
transport tires are properly inflated.
5. Check the O.P.C. system (Section 6.2).
6.2 OPERATOR PRESENCE CONTROL __________________________________________
1. The O.P.C. system is intended to protect the operator
and others from injury by stopping the reel and drive
mechanism as soon as the operator releases the
O.P.C. bail. The unit is also equipped with an engine
stop (E-Stop) switch that will stop the engine from the
operator’s position.
2. To test the system:
a. Place mower on the kickstand.
b. Disengage the reel clutch lever (E).
3. Start the engine.
a. Slide bail to the left and engage OPC Bail.
b. Engine speed will increase, the drive mechanism
will engage, and the wheels will begin to turn.
c. Release the O.P.C. bail. The bail must
disengage, engine speed return to idle, and drive
mechanism must stop.
d. Push E-Stop switch down. Engine must stop
immediately.
4. If the drive mechanism engages before the O.P.C.
bail is engaged, or the drive mechanism continue to
turn after the O.P.C. bail is released, stop the engine
immediately and have the system repaired.
CAUTION
The daily inspection should be performed only when
the engine is off and all fluids are cold. Disengage all
drives, engage parking brake, stop engine, and
disconnect spark plug wire.
!
WARNING
Never operate equipment with the O.P.C. system
disconnected or malfunctioning. Do not disconnect or
bypass any switch.
!

OPERATION 6
19
6.3 OPERATING PROCEDURES _________________________________________________
1. Under no circumstances should the engine be
started with operator or bystanders standing in front
of the reel.
2. Never run the engine in an enclosed area.
3. Keep hands and feet away from moving parts and
cutting units. If possible, do not make adjustments with
the engine running.
4. Do not operate mower or attachments with loose,
damaged or missing components. Whenever
possible mow when grass is dry.
5. First mow in a test area to become thoroughly
familiar with the operation of the mower and control
levers.
6. Study the area to determine the best and safest
operating procedure. Consider the height of the
grass, type of terrain, and condition of the surface.
Each condition will require certain adjustments or
precautions. Only use accessories and attachments
approved by Jacobsen.
7. Be aware of mower discharge direction and never
direct discharge of material toward bystanders.
Never allow anyone near the machine while in
operation. The owner/operator is responsible for
injuries inflicted to bystanders and/or damage to
their property.
8. Use discretion when mowing near gravel areas
(roadway, parking areas, cart paths, etc.). Stones
discharged from the mower may cause serious
injuries to bystanders and/or damage the
equipment.
9. Disengage the reel clutch to stop blades when not
mowing.
10. Disengage the reel clutch when crossing paths or
roadways. Look out for traffic.
11. Stop and inspect the equipment for damage
immediately after striking an obstruction or if the
machine begins to vibrate abnormally. Have the
equipment repaired before resuming operation.
12. Slow down and use extra care on hillsides. Use
caution when operating near drop offs.
13. Look behind and down before backing up to be sure
of a clear path. Use care when approaching blind
corners, shrubs, trees, or other objects that may
obscure vision.
14. Never use your hands to clean cutting units. Use a
brush to remove grass clippings from blades. Blades
are extremely sharp and can cause serious injuries.
CAUTION
To help prevent injury, always wear safety glasses, leather work shoes or boots, a hard hat, and ear protection. Long
hair, loose clothing, or jewelry may get tangled in moving parts.
!
NOTICE
To prevent damage to the reel and bedknife never
operate the reels when they are not cutting grass.
Excessive friction and heat will develop between the
bedknife and reel, and damage the cutting edge.
CAUTION
Before mowing, pick up all debris such as rocks, toys,
and wire which can be thrown by the machine. Enter a
new area cautiously. Always operate at speeds that
allow you to have complete control of the mower.
!
WARNING
Before you clean, adjust, or repair this equipment,
always disengage all drives, engage parking brake,
stop engine, and remove spark plug wire to prevent
injuries.
!

6 OPERATION
20
6.4 STARTING/STOPPING ENGINE ______________________________________________
Starting
1. Check oil level and fuel supply, then open fuel valve
lever (G).
2. Move the choke lever (F) to the CLOSED position.
3. Set engine switch (D) to ON.
4. Make certain the O.P.C. bail (C) is disengaged and
the parking brake (A) is engaged.
5. Select desired position for reel clutch lever (E).
To cut - engage reel clutch (E).
To transport - disengage reel clutch (E).
6. Start the engine. Do not allow the cord to snap back
into the starter. Do not tilt the mower back when
starting.
7. When engine starts, move choke lever (F) to the
OPEN position. Intermittent choking may be
required while engine is cold.
8. Allow engine to warm up gradually.
Stopping
1. To stop the engine, release the O.P.C. bail (C), and
set engine switch (D) to OFF position. Close fuel
valve (G).
2. Engage parking brake (A).
Figure 6A
Figure 6B
Figure 6C
CAUTION
Always start and stop the engine when the mower is
on level ground. Keep feet away from blade when
starting engine.
WARNING
To prevent bodily injury or property damage, never
engage the reel clutch lever while the engine is
running or the O.P.C. bail is engaged.
!
!
OFF
ON
D
ON
OFF
F
G
C
B
A
E