J&M Corporation HCRK-6712TW-XXR User manual

© 2017 J&M Corporation. All rights reserved. 6/17
Warning: The speakers provided in this kit have an impedance of 2-ohms. They are designed for use with
the 2006-2010 Harley Harmon Kardon audio system ONLY. Use of these 2-ohm speakers on the 1998-2005
Harley audio system can and will cause permanent damage to the system.
ROKKER®XXR
6.71” Fairing Speaker Upgrade
Kit for 2014-2017 Harley®
StreetGlide/Ultra
#HCRK-6712TW-XXR
Installation
Instructions

Product Overview
J&M’s NEW ROKKER XXR series 6.71” speakers have been designed
as exact size component/replacements for the stock Harley fairing
speakers as installed on the 2014-2017 Harley StreetGlide, Ultra or
Ultra Ltd.
Spec’d at 2 ohms impedance and an impressive 300 watts maximum
input (175w RMS - 91db sensitivity), these speakers provide the
ultimate in raw audio power and include the new custom grills with
built-in high-output tweeters.
Features of this new ROKKER XXR series speaker kit from J&M are:
• Lightweight waterproof one-piece woven-ber driver cone.
• High-output grill-mounted dome tweeters.
• Super high-density lite-weight Neodymium magnet structure,
specially coated to maintain ux-strength integrity even at extreme
operating temperatures.
• High efciency VENTED voice-coil for improved cooling when operat-
ing at high volume levels for extended periods.
• Custom speaker grills with high-output tweeters for crystal clear
sound at highway speeds.
Mounting hole pattern and spade electrical connections are exactly
the same as the factory specication, this is a total plug-and-play
no-modication solution complete with easy to follow installation
instructions.
These are THE most powerful speakers you can buy for your Harley
and they will perform extremely well when used with a medium to
high-powered accessory amplier.
Installation and Instructions
1. Remove the windshield and outer fairing clamshell completely.
Important Note: If the bike is equipped with the Harley CB radio
module, ensure that the CB module is removed before removing
the applicable speaker pod assembly.
RIGHT SPEAKER
2. Remove the three 7/16 attachment screws from the inner bottom
edge of the speaker pod. (Figure A)
3. Remove three 3/16 Allen head screws on the outside edges of
the speaker pod. (Figure B)
4. Remove the two 5/32 Allen head screws from top edge of metal
mounting tray. (Figure C)
5. Unplug the wire connection for the cigarette lighter socket from
the speaker pod.
6. Remove the pod from the fairing.
7. Remove the speaker from the pod by removing the 4 retaining
screws.
8. Unplug the speaker wires from the speaker and set aside.
Fig. B
Remove screws
Remove screw
Fig. A
Remove screws

Thank you for the condence you have shown in J&M Corporation by
purchasing one of our innovative products.
If you have any question or comments about this product, you may
contact us at USA 1-520-624-7000 Monday thru Friday, 8:00AM thru
5:00PM Mountain Standard Time.
1415 S. Cherry Avenue
Tucson, AZ 85713 U.S.A.
Tel (800) 358-0881
Website: http://www.jmcorp.com
E-mail: [email protected]
9. Remove the stock grill from the inner fairing by removing the 3
attachment screws. VERY IMPORTANT: Discard these screws as
they will not be used again. (Figure D)
10. Install the new ‘J&M grills using the (3) #12 X ½” countersunk
self-tapping screws provided, with the grill-mounted tweeter in the
upright position. VERY IMPORTANT: Do Not use the stock Harley
screws to attach the new ‘J&M grills, or the speaker pods will not
reinstall properly.
11. Install the new 6.71” ROKKER XXR speaker using the original
speaker attachment screws; Ensure that the speaker is placed
into the pod with the tweeter-wire exiting to the upper, outer cor-
ner. (Figure E)
12. Plug the tweeter wire from the main speaker into the correspond-
ing plug on the backside of the grill. Then re-install the speaker
pod assembly back into the fairing, paying close attention to pull
the EXTRA tweeter wire length back out between the back side of
the grill and front of the main speaker, so that this extra wire does
not rattle against the main speaker cone when playing.
13. Repeat steps 2 through 12 for the opposite side speaker.
Important Note: If the bike is equipped with the Harley CB radio
module, ensure that the CB module is removed before removing
the applicable speaker pod assembly.
14. Test each speaker for proper operation before reassembling the
fairing.
Fig. D
Fig. C
Remove screws
Remove screws
Fig. E

WARRANTY REGISTRATION FORM Please fill out this card completely and mail it immediately after purchase. Please be sure that your zip code
and serial number (if applicable) are legible. This will help us to serve you better.
(PLEASE PRINT)
Name ______________________________________________________________________________________________________________________________________________________
Address_____________________________________________________________________________________________________________________________________________________
City _______________________________ _________________________________State __________________________ Zip ______________________________________________________
Motorcycle mOther m E-mail ______________________________________________________________________________________________________
Make ___________________________________________ Model ______________________________________ Year __________________
Product part number ______________________________________________________________________
Serial number (if applicable)________________________________________________________________
Date of purchase _________________________________________________
Name of dealer it was purchased from ____________________________________________________________________________________
Mail to:
J&M Corporation
1415 S. Cherry Avenue
Tucson, AZ 85713
U.S.A.
WARRANTY AND REPAIR INFORMATION
TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and
returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty,
and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned,
on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.
WHO PROVIDES THE WARRANTY? This warranty is provided by J&M CORPORATION.
WHO IS PROTECTED? This warranty is extended only to the original owner of this J&M CORPORATION product and may not be
transferred or assigned.
WHAT IS COVERED AND HOW LONG? This warranty covers all defects in material or workmanship of our product for a period of
2 years from date of original retail purchase. At its option, J&M CORPORATION will repair or replace any defective part(s) or
equipment.
The provisions of the warranty shall not apply to any unit which has been subjected to misuse, neglect, incorrect mechanical or
electrical installation, unauthorized modifications, accident, nor to units which have been repaired or altered outside of our factory.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY In the event that the product does not conform to this warranty, the product
should be shipped prepaid to the J&M CORPORATION service facility. Transportation charges, insurance fees, and labor costs for shipment,
removal, or reinstallation of our product are not covered by this warranty. Loss or damage in shipment is the sole responsibility of the freight
carrier.
FOR YOUR INFORMATION Repair as provided under this warranty is the exclusive remedy of the consumer. J&M CORPORATION shall
not be liable for any incidental or consequential damages or for breach of any express or implied warranty on this product. Except to the
extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited
in duration to the duration of the warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages,
or allow limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives
you specific legal rights which vary from state to state.
J&M CORPORATION reserves the right to make changes in design and to make improvements in its products without the obligation to
incorporate the changes or improvements in any of its previously manufactured products.
J&M CORPORATION has not authorized anyone to make representations or warranties other than the warranty contained herein.
The above warranty is effective for all products manufactured after 10/01/86.
NON-WARRANTY REPAIR RATES J&M CORPORATION reserves the right to change the labor repair rates without prior notice. At the time
of this printing the out-of- warranty repair is $40 per hour for labor only. However, the customer is advised to verify the
current rate when he/she calls customer service to obtain the return authorization number.
FACTORY SERVICE ADDRESS J&M Corporation, 1415 S. Cherry Avenue, Tucson, Arizona, 85713, U.S.A. Tel: 1-800-358-0881 audio@
jmcorp.com www.jmcorp.com
CUSTOMER SERVICE NUMBER 1-800-358-0881
Table of contents