JAXSUNNY HG61X0813 User manual

User Manual

1 2
You need
Hardware List
1PC 1PC 1PC
A
F
B C
E G
1PC
D
1
1PC 1PC 1PC 13PCS
13PCS 13PCS 1PC
11 person is needed 2Take 20 minutes
20mins
234
A
B
G
D
C
F
E
M8*65mm

4
3
PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
STEP 2
STEP 1
Check the package contents before getting started !
Put the screws in the holes,
tighten every screw, not too tight,
50% is OK, make sure every screw
into the hole. and then tighten
all screws to 100%.
1PC 1PC
A B 15PCS 5PCS
5PCS 1PC
2
34
1
3
2
4
A
B
1PC F
CE
1PC
D1PC 1PC
18PCS 8PCS 8PCS 1PC
234
Put the screws in the holes, tighten the
screws, but not too tight, 90% is ok.
D
C
E
F
M8*65mm
M8*65mm

6
STEP 4
Warning
5
STEP 3
PRODUCT ASSEMBLY PRODUCT ASSEMBLY
Please put the chair on a flat surface.
Please adjust the parts connecting the seat and the back to make sure four legs are on same
level.
Tighten the bolts.
Tip: It would be easy to adjust the legs by sitting on the chair and do that with the help of your
own weight. Put the cover under the seat(G) to the cushion seat(B) .
G
G
1PC
Read the instrucon carefully
Cauon
See hardware and FURNITURE part list for guidance, be sure all parts are complete, before
you assemble, place all wooden parts on a clean and flat soft surface to prevent from being
scratched.
1.Do not fully tighten the bolt until all parts are assembled.
2.Do not over- tighten the bolt to avoid causing damages to the thread.
3.Cleaning of pu cover-wipe clean with a soft cloth moistened with
water and neutral detergent. Do not use bleach, chemical or biological cleaners.
4. Cleaning of fabric cover-wipe clean with a soft cloth without water. Do not use water bleach,
chemical or biological cleaners.