Jay-tech PF07 User manual
……..………….…....……..1
……………..………………….…..…….3
………………..………………...……..4
…………………..................……..7
……..………..………........…........…......9
…………..…………….......……………11
…….……...………………...…….....….... ..11
…….…...…………………...........………..14
.……….....….……………….....…..…15
……….……….....…………..……….…...……16
……………………...............………20
…………….……………………...……21
….......……………………….…22
…............…….....……………23
…..…………….…............…1
Contents
User Manual
For correct usage, please read these instructions carefully and
keep in a safe place for future reference!
1. General Safety Instructions
Important safety precautions
2. Package contents
3. Product description
4. Using the film holders
5. Getting started
6. Operation Guide
1: Capture
2: Playback
3: USB Connect
4: Setup
7. Connecting to a TV
8. Troubleshooting
9. Cleaning & Maintenance
10. Technical Specifications
1
The apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed over
the product. Dry location use only.
Keep the scanner clean and never store it next to a heat source
or in dirty, humid or wet places. Keep it out of direct sunlight.
Press the buttons gently. The product may damage if you press
them too hard.
Do not use the product in an extremely dry environment.
Do not subject the product to harsh impacts. Do not drop the
appliance; this may result in damage to the product.
Do not attempt to dismantle or repair it yourself. Only qualified
personnel can repair the product.
Disconnect the appliance from the power supply before you
clean it.
Use a slightly damp, lint-free cloth to clean this appliance. We
strongly suggest using a clean, dry, non-alcohol cotton swab to
insert into the film scanner and clean the glass surface
periodically to produce a clear image.
Care required with the use of this apparatus in tropical and/or
moderate climates.
This product is not intended for commercial use. Household Use
Only.
Do not disassemble this unit. In order to prevent the product from
risk of electric shock, do not remove cover. No user-serviceable
parts inside. Refer servicing to qualified personnel.
Important safety precautions
1. General Safety Instructions
Congratulations on the purchase of your photoframe film scanner.
Before operating it, please take some time to read this manual
thoroughly and keep it for future reference. Follow these important
safety and operation instructions.
•
•
•
•
•
•
•
•
•
•
•
2
•
•
•
•
•
•
The device should be situated in ventilation surroundings for
proper ventilation. The unit should not be situated on a bed, sofa,
rug or similar surface that may block the ventilation openings.
The USB cord of the device should be unplugged from the
computer when the unit does not use for a long period of time.
Do not overload the USB connections on your computer. If you
have other devices connected to your computer such as a
wireless mouse, Media player, mobile phone or other USB
powered devices. If too many devices are connected to the
computer there may be inadequate power for the film scanner to
operate properly.
The film holder is designed to accept 35mm film negatives in ISO
1007 standard. It is not recommended to use the film holder for
other film formats. In some cases using a non-standard 35mm
camera may result in the perforations on the film not aligning
correctly with the holder. In this case there will be a small black
line on the edge of the frame that can easily be cropped out using
the Blaze Photo Software.
ISO--International Organization for Standardization
For environmental protection and energy conservation, the
device will powered off automatically without any operation
in 30 minutes.
3
2. Package contents
The package contains the following items:
Photoframe film scanner
Film holder
AC Adapter
TV cable
USB cable
User manual
Please contact your retailer if you have not received any of these
items.
◆
◆
◆
◆
◆
◆
4
3. Product description
• Photoframe film scanner
5
• Positioning the film scanner
Landscape Portrait: extend the leg at the
back of the product when in this
position
Front face Back face
No.
1
2
3
Part Function
Screen 7" color screen
Insert film here
Scan button + LED
Start scanning
LED:
1.Red: no card or no memory left
2.Green: Ready
3.Flashing green: capturing
• Film holder
Film entry slot
6
4
5
6
Home button
Next Button
Return to the main menu
1.Selects on the right
2.Capture mode: flip image
OK button
7Previous button 1.Selects on the left
2.Capture mode: mirror image
8
9
10
11
12
13
14
15
Power button
SD card slot
TV out
USB
Leg stand
On/off button
Insert SD card here
Note: Upon turning on the scanner, the green LED light will be on to
startup the machine. After 2 seconds, the color of the LED will show
the status of the scanner. (Refer above for LED light indicators)
1.Enter selection
2.Capture mode: long hold (EV mode),
short press (Film type mode)
AC adaptor
Film exit slot
Strip film holder
Connects to the provided TV out cable
Connects to the provided USB cable
Connects to the provided AC cable
Film exits here
Extend leg when in photoframe
scanner is in the portrait position
Holder for positive and negative
strip film, holds 3 frames and above
7
4. Using the film holders
Slides: The light, shade and color of the slide look exactly the same
as the original image.
Negatives: The light and shade, color of the Negative is exactly
inverted from the original image.
Note: Please remove the protection film on the film holder before
use.
Loading single frame cartridge (not included in the package)
1.Insert the holder into the slot at the front of the film scanner. Make
sure that the positive side faces to the left (front face of the holder
faces left).
Note:
•The maximum thickness of these cartridges is 3mm.
Positive side of the
film faces left
Loading a roll of film
1.Insert the holder into the slot from the top of the film scanner.
2.Insert the strip of slide or negative holder into the slot at the front
face of the film scanner. Make sure that the positive side faces to the
left.
3.Insert the film parallel to the direction of entry. Please do not slant
or tilt the film.
4.Pull out the film from the back in a steady manner.
Note:
•Handle films with care. Any dust, scratches or fingerprints will show
up on your saved images. It is recommended to wear cotton gloves
when handling films and to use compressed air to remove any dust
on the films. The compressed air canister and gloves are not
included with the film scanner but they can be purchased from an
office or electronics supply retailer.
8
Match arrow to arrow Positive side of the
film faces left
9
5. Getting started
1. Insert SD/MMC card into the film scanner.
2. Please connect the power to the film scanner and plug into a
power source.
• USB: Connect to PC with USB cable
• 5V adapter: Connect to power socket with AC adapter and USB
cable
3. Press the POWER button to turn on the film scanner.
4. Insert the Slide/Negative film into the slot on the right side of the
film scanner. (Refer to using the film holders for loading instructions)
NOTE:
•After you turned on the device, if there is no SD/MMC card inserted,
a warning screen will be shown and it will entering main menu
automatically.
•Once the images in the internal memory or memory card are full, a
memory full icon will be shown on screen when you press SCAN
button. You have to download the images to PC or use another
memory card for the next capture. Please turn off the scanner before
removing the SD card
10
Memory full indicator
•Before you turn on the film scanner, you need to insert the
SD/MMC card into the film scanner. Otherwise the device maybe
powered off.
•Do not remove the memory card when the device is powered on.
Device will power off when the SD card is removed.
•The film scanner has a built-in memory card for storage. When
there is an external SD/MMC card, the default storage location will
automatically switch to the SD/MMC card.
•You can view scanned images in Playback mode or via a computer
in USB mode. (You can also view pictures by other devices which
supports JPEG format with SD/MMC card compatibility)
11
6. Operation Guide
Home: Main menu
The film scanner has four main functions:
No.
1
2
Mode
Capture
Playback
Function
Plays back images stored in the
internal storage or SD card
3
4
USB Connect
Setup
Connects to PC
1: Capture
Press OK button to enter capture mode.
When the film scanner is left idle for more than 5 seconds, upon
powering on, it will automatically enter capture mode.
1.1 (Live View): Mirror/Flip (Hard Key)
If any image requires Mirror or Flip function before capturing:
Captures positive and negative film
Options to customize the film scanner
12
1.PREVIOUS button: mirror image
2.NEXT button: flip image
The live view will be adjusted accordingly. (This step is to correct
any disorientation). Mirror and Flip buttons only be functioned in the
live view mode.
1.2 Capture mode
In capture mode, there are three film types for scanning photos:
13
No.
1
2
3
Options
Negative Film
Slides
B/W
Functions
Scanning negative color film
Scanning positive color film
Scanning black and white film
Press the OK button to switch the film types to scan. Press the
SCAN button, the current image will be captured and saved to
internal memory or SD/MMC card, then return to live view again.
To adjust the exposure value manually from -2 to 2, press and hold
the OK button for 3 seconds. Press PREVIOUS/NEXT to select the
exposure value, and then press OK button to confirm.
Note: EV 2 means brighter exposure value and EV -2 means darker
exposure.
14
2: Playback
Press the HOME button to access the main menu, then press NEXT
button to choose the Playback function, and press OK button to
confirm. The photos will be playback in slide show mode.
2.1 Playback: Slide show Single picture Edit mode
You can interrupt (Pause) slide show mode to stand-alone playback
mode (single picture playback) by pressing the OK button. Use the
PREVIOUS/NEXT button to manually scroll the pictures.
To edit the picture stored in internal memory or SD/MMC card, press
OK button again to bring out the edit mode for modification.
Note:
•If there is no SD/MMC card inserted or no image in internal memory,
it will display 20 Pre- installed images which cannot be edited.
•If there is no file when enter playback mode, a No File symbol will
show on screen.
15
2.2 Playback: Rotation
In “Edit mode”, press PREVIOUS/NEXT button to select clockwise
or counter clockwise icon to rotate image 90 degree respectively and
press the OK button to save image.
2.3 Playback: Delete
Select DELETE icon and press OK button to confirm. The current
picture will be deleted and next picture will be shown. Press HOME
button to exit edit mode.
3: USB Connect
When the device is connected with USB cable to PC, please press
OK button to enter into main menu, then press PREVIEOUS/NEXT
button to select USB mode, press OK button to confirm, the film
scanner will become a mass storage device and you can view or
edit images on PC.
3.1 USB mode/Status
Once select USB mode, the film scanner will become a mass
storage device and will show on the screen, it will appear as a
removable disk on the PC. Open the folder to view or edit images on
the PC.
16
Press the HOME button to return to main menu.
4: Setup
There are six options in setup mode:
No.
1
2
3
4
5
6
Options
Resolution
Language
Format
FW Upgrade
Function
Adjusts the resolution of the captured image.
Language selection
Reformats the product
Software upgrade
Product software information
Default
Version Info
Restore to original setting
17
4.1 Resolution
Press OK button to enter into Resolution mode, and then press
PREVIOUS/NEXT button to select Resolution, then press OK button
to confirm.
Two kind of resolution you can select:
① 5 Megapixels resolution
② 10 Megapixels resolution
Press PREVIOUS/NEXT button to select resolution options, and
then press OK button to confirm your choice.
4.2 Language
Press PREVIOUS/NEXT button to select Language mode, and then
press ENTER button to confirm, press PREVIOUS/NEXT button to
select language, press ENTER button to confirm.
It supports 8 kinds of languages: English, French, German, Italian,
Spanish, Traditional Chinese, Simplified Chinese and Japanese.
