Jazz Hipster Corporation JE1101AW User manual

JE1101AW / JE1101BW / JE1101DW
Bluetooth Dongle
User Manual
1.Changes or modifications are not expressly approved by the
manufacturer could void the user'sauthorityto operatethe equipment.
Changesor modifications tothe device mayvoid FCC andCE
compliance. In frequentlyusedradiolinks shouldbe testedregularly to
protect againstundetected interference orfault.
2. Avoid exposingspeakersto environments that are excessively warm
andhumid (particularlyin unventilated spaces or nearbyheaters)or
dusty.
3. Donot setspeakers near windowsexposed todirect sunlight or in
areas proneto water seepage.
4. Avoid excessive vibration ofspeakers.
5.Clean speaker housingbywipingwith mildcleaning solution.Do not
usesolvents!
6.Thespeakers incorporate an efficient anti-magnetic architecture,
permitting use inclose proximity tomost television screens. Iftheuse
of your speakers cause distortions inyourtelevision screencolors, try
thefollowing: Turnoff and unplugyourtelevision,turn on the speaker(s).
After waiting 15 to 30 minutes, turn thetelevisionon and increase the
distancebetween screenandspeakers until distortion disappears.
Also, note whether othermagnetic emission sources are inthe
immediate vicinity. Ifso, relocatesoas to preventscreen distortion.
7. "!" WARNING: Before connectingor disconnectinganycables, make
surethat thespeaker's power button isinthe " OFF "position andthe
power adapter isunpluggedfrom the powersource and not receiving
power.
8.All other brandandproduct namesare trademarksor registered
trademarks of their respective holders.
9.Allspecifications subject to change without prior notice.
10."Operation issubjectto the followingtwo conditions: (1) this device
may not cause interference, and (2)this device mustacceptany
interference, including interference thatmay cause undesired operation
of the device."
11.This devicecomplieswithEMC Directive 89/336/EEC,Low Voltage
Directive 76/23/EECand R&TTE Directive 1995/5/EEC.This product
has been approvedfor upper directives and covers the followingcountries:
Notice
JAZZ Hipster Corporation
2F, No.512, Yuan-San Road, Chung-Ho City
Taipei Hsien,Taiwan, R.O.C

1. LED indicator (red/blue indicator light): When the LED indicator flashes
blue, the power is ON and the device is working. When the LED
indicator flashes red and blue alternatively, it indicates that the device
is in pairing mode. When the red light is permanently ON, it indicates
that the device is charging.
2. Multifunction button (power switch/pairing and searching function)
3. Audio input port (various models for different iPod, MP3, PSP and CD
Players.)
4. Power input for lithium battery.
1. Please charge the device before you use it for the first time. The LED
indicator lights up red to indicate that the device is charging, and the
LED indicator goes out to indicate the charging is completed.
2. Connect the device to an appropriate audio source (various models
for different iPod, MP3, PSP and CD Players).
3. Press and hold the multifunction button for more than 3 seconds (the
LED indicator will flash blue for three times) and then release the
button. The LED indicator will flash once per second to indicate
Bluetooth is activated successfully.
4. Press and hold the multifunction button again (the LED indicator will
flash red and blue alternatively) and then release the button to enter
searching and pairing mode.
5. Have a Bluetooth reception device to be paired with the device, such
as Bluetooth speakers or earphones, ready for pairing. Please refer
to the product manual of your Bluetooth reception device for how to
pair and search.
6. It might take longer for the device that is pairing for the first time
(approximately for 1 to 2 minutes). Please wait patiently.
7. When pairing or searching is completed, the LED indicator will flash
blue (4 times every 4 seconds) to indicate the pairing is completed
and the audio source can be transferred to the reception device, such
as Bluetooth speakers or earphones, through Bluetooth.
8. If the pairing or searching fails, please repeat Step 3 to Step 7.
9. To turn off the device, press and hold the multifunction button until the
LED indicator goes out.
Product at a Glance
1
1
Operating Instructions
1. Bluetooth Specification: Bluetooth SIG 1.2 A2DP profile
2. Charging Voltage: DC 5V/0.5A
3. Internal Battery Type: Chargeable Lithium Battery
4. Output Power Class: Class 2
5. Built-in Antenna
6. Dimensions (W x H x D): 281 mm x 281 mm x 106 mm
Specifications
Package Contents
1. Bluetooth Dongle x 1
2. USB Charging Cable x 1
3. User Manual x 1
4. Warranty x 1