TroubLeshooting
If there is no sound from
any of the speakers, check
the foLLowing:
•Receiver/ampLifieris on and
asource is playing.
• Review proper operation of
your receiver/ampLifier.
If there is no sound coming
from one speaker, check the
foLLowing:
• Checkthe "BaLance" control
on your receiver/ampLifier.
• Checkat[ wires and connec-
tions between receiver/
amplifier and speakers.
•Makesure all.wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
If the system ptays at tow
votumes but shuts off as
votume is increased, check
the foLLowing:
•CheckaLLwires and connec-
tions between receiver/
amp|ifier and speakers.
• Make sure at[ wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
main speakersis being used,
check the minimumimped-
ance requirements of your
receiver/ampLifier.
If there is tow bassoutput,
check the foLLowing:
• Make surethe polarity
(+ and -) of the Leftand
right "Speaker Inputs" are
connected properly.
If there is no sound from *
the center speaker, check
the following:
• Makesure that your receiv-
e(s Center Channel Mode is in
the "normaL" or "wide" posi-
tion. If it is in the "phantom"
position, the center speaker
wiLLnot play.
•CheckaLLconnections
between processor/ampLifier
and the center speaker.
