JC LAB BIMC-A03A-W2 User manual
INDEX
1.0 Copyright Page 1 - 3
2.0 Wi-Fi Eyepiece at a Glance Page 4 - 6
3.0 Introducon Page 7
4.0 Unpacking and Assembly Page 7
5.0 Installaon of JC CAM Soware for Windows PC Page 8 - 10
6.0 Installaon of JC CAM Soware for Android/IOS Page 11 - 12
7.0 Connecon of JC CAM for Windows PC Page 13 - 14
8.0 Connecon of JC CAM for Android/IOS Page 15 - 16
9.0 JC CAM Soware Instrucon (Window PC) Page 17 - 39
10.0 Ucam Plus Apps Instrucon Page 40 - 44
11.0 KoPa Wi-Fi Edu Apps Instrucon Page 45 - 50
12.0 Cauons and Notes Page 51
13.0 Soware System Requirements Page 52
14.0 Electrics Page 53
15.0 Recycling and Recovery Page 53
Copyright
© 2012 by JC LAB Corporaon. All rights reserved. Under the copyright law,
this manual cannot be reproduced in any form without the prior wrien
permission of JC LAB. No patent liability is assumed, with respect to the use of
the informaon contained herein.
First edion Feb. 2012
Disclaimer
This manual has been validated and reviewed of accuracy. The instrucons
and descripons it contains are accurate for your wi-microscope at the me
of this manual’s producon. However, succeeding wi-microscope and
manuals are subject to change without noce. JC LAB assumes no lability for
damages incurred directly or indirectly from error, omissions or discrepancies
between the wi-microscope and the manual.
Trademarks
◆JC CAM & KOPA logo are registered trademarks of JC LAB Corporaon.
◆Wi-Fi is registered trademark of Wi-Fi Alliance.
◆USB, the USB logo and USB interface are trademarks or registered
trademarks of USB Licensing LLC.
Other trademarks are registered trademarks not listed above may be used in
this manual.
EU Declaraon of Conformity
This Product is carrying the CE-Mark in accordance with the related
European Direcves. Responsible for CE-Marking is JC LAB Japan
GmbH, 5 Chome-12-13 Serigaya Kōnan-ku, Yokohama-shi,
Kanagawaken 233-000, Japan. The complete and ocial EU
Declaraon of Conformity can be found on JC LAB website
hp://www.jc-lab.jp on the internet.
1.0 Copyright
Page 1
Disposing of the Microscope and It’s Baeries
◆Discard this Microscope in accordance with applicable laws and
regulaons. For further informaon, contact your government.
◆Some models contains rechargeable baeries. Aer repeated use, the
baeries will nally lose their ability to hold a charge and you will need to
replace them. Under certain applicable laws and regulaon, it may be
illegal to dispose of old baeries by replacing them in the trash.
◆Please be kind to our shared environment. Check with your local
government authority for details regarding where to recycle old baeries
or how to dispose of them properly.
Informaon for Wireless Devices
Page 2
Wireless Devices and your Health
Wireless Products, like other radio devices, emit radio frequency
electromagnec energy. The level of energy emied by Wireless products
however is far much less than the electromagnec energy emied by wire
device like for example mobile phones.
Because Wireless products operate within the guidelines found in radio
frequency safety standards and recommendaons, JC LAB believes Wireless
products is safe for use by consumers. These standards and recommendaons
reect the consensus of scienc community and result from deliberaons of
panels and commiees of sciensts who connually review and interpret the
extensive research literature.
In some situaons or environments, the use of Wireless Products may be
restricted by the proprietor of the building or responsible representaves of
the organizaon. These situaons may for example includes:
◆Using the Wireless products equipment on board of airplanes, or
◆In any other environment where the risk of interference to other devices
or services is perceived or idened as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in
a specic organizaon or environment (e.g. airports), you are encouraged to
ask for authorizaon to use the Wireless device prior turning on the
equipment.
1.0 Copyright
Canada — Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operaon is subject to the following two condions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may case undesired operaon on this device.
The Term “IC” before the equipment cercaon number only signies that
the Industry Canada technical specicaons were met.
USA-Federal Communicaons Commission (FCC)
Page 3
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part of FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon.
JC LAB Support
If you require any addional help your devices or if you are having problems
operang devices, you may need to contact JC LAB for addional technical
assistance.
Before you call
Some problem you experience may be related to soware, apps or the
operang system so it is importance that you invesgate other sources of
assistance rst.
Before contacng JC LAB, try the following:
Review troubleshoong secons in the documentaon supplied withyour
soware and/or peripheral devices.
If problem occurs when you are running in your computer systems, consult the
soware document for troubleshoong suggesons and consider calling the
system company’s technical support department for assistance.
Consult the reseller or dealer from where you purchased your devices and
soware— they are your best resource for current informaon and support.
JC LAB technical support
If you are sll unable to solve the problems and suspect that it is hardware
related, visit JC LAB technical support website
hp://www.jc-lab.jp
1.0 Copyright
Page 4
① Wi-Fi signal reset buon hole
Short press: press 1-3 seconds to switch Wi-Fi signals (2.4G to 5G)
Long press: more than 10 seconds, restore the default Sengs.
2.1 Wi-Fi Eyepiece at a Glance
2.0 Wi-Fi Eyepiece at a Glance
1234
5
6
8
7
10
9
② Charge lamp
While charging from a USB port in a computer or adaptor, it can be used at the same me.
If baery has low energy or no energy, the light ashes once 1.5 seconds.
If baery has medium energy, the light ashes once 2.5 seconds.
If baery has high energy, the light ashes once 4 seconds.
If baery fully charged, the light will be always green.
③ Power lamp
High power: green light
Low power: red light
No power: the device turns to power o state aer 30 mes of red light ashing.
You need to reset the buon for new work.
When red light ashes, work can be done under charging mode.
Page 5
Note: All features may vary based on your locaon, language, carrier, and
model number. Accessory parts may incur addional fees. Contact your
local distributor to ensure the features.
④ Wi-Fi lamp
The Wi-Fi indicator is on when in wireless working mode,
When the output signal is 2.4G Wi-Fi, the Wi-Fi indicator is green.
When the output signal is 5G Wi-Fi, the Wi-Fi indicator is blue.
Note: the default Wi-Fi output signal is 5G Wi-Fi.
The switch of 2.4G and 5G signals can be achieved by pressing the reset buon hole (1-3 seconds).
⑤ Toggle key
Divided into Three states：
●Toggle le (switch Icon): shut down.
●Toggle middle (USB Icon)：PC enable.
●Toggle right (Wi-Fi Icon)：wireless Wi-Fi enable.
2.0 Wi-Fi Eyepiece at a Glance
⑥ USB TYPE-C port
Charge the Wi-Fi Digital Camera is connecng adaptor with USB Cable; Connect PC with USB Cable, and
turn on the USB work mode, Wi-Fi Digital Camera will start wired working.
⑦ Antenna
It is a External antenna. More Stable for Wi-Fi Signal.
⑧ Quick mounng screw hole
It has ¼ inch threaded port at the boom, and it can be directly locked on the tripod.
⑨ C-mount thread
Make our camera can install to a standard C-mount microscope or spong scope; or can install to a
dierent interface microscope with adapter.
⑩Dustproof Cover
Screw it out before use for dust prevenon and chip protecon.
Page 6
Adapter Ring and Eyepiece:
Wi-Fi Digital Camera can be equipped into microscopes of
dierent calibers through adapter ring and eyepiece. The
Camera eyepiece body is of Standard C Port; 0.5X eyepiece is
of 23.2mm; adapter ring is of 23.2/30mm, 23.2/30.5mm.
According to dierent assembly methods, the equipment can
be connected to eyepieces of dierent ports.
2.2 Accessory
2.0 Wi-Fi Eyepiece at a Glance
Installaon Disk:
It’s contain JC CAM windows soware, manual instrucons,
packing list, warranty sheet.
If you lost the CD, please contact your local distributor.
Type-C to USB Cable:
Support reverse inseron, so you can insert either end of
the cable. It can transmit data at a higher rate. 4K videos
can be transmied via a USB 3.1 Type-C port. support
relavely larger charging currents ranging from 3 A to 5 A,
and support reverse charging. And more rened in
structure and more safe in use.
Power Adaptor 5V, 2000mA:
It have a overcharge, short circuit, over current, over-voltage and
over temperature protecon. Shell adopt re-proof materials.
-Comply with UL, FCC, CE, RoHs cercaon standards.
-Industry grade design, can work normally at: -40℃ ~ +85℃
This microscope is a scienc precision instrument designed to last for many years
with a minimum of maintenance. It is built to high opcal and mechanical standards
and to withstand daily classroom and laboratory use.
JC LAB reminds you that this manual contains important informaon on safety and
maintenance, and that it must therefore be made accessible to the instrument users.
JC LAB declines any responsibility deriving from instrument use that does not comply
with this manual.
Page 7
3.0 Introducon
4.0 Unpacking and Assembly
4.1 Open JC LAB'S unique "All In One Box". It divided
into two layers. Please check all component in
packing list.
4.2 The rst me you received, you need to charge
the baery of the machine unl the Charge lamp
light always green.
4.3 Unscrew the plasc dustproof cover at the
boom of the Wi-Fi Digital Camera. Connect 0.5x
eyepiece.
4.4 Plug it into microscope’s Eyepiece hole. Then
switch on the Wi-Fi Digital Camera to USB mode or
Wi-Fi mode and start the program.
BIMC-12C
Page 8
5.0 Installaon of JC CAM Soware for Windows PC
5.1 Put the appendant disc into the DVD driver of your computer, Double click the le
“JC Cam for Window Install.exe ” under the disk catalogue. When the following window
pops up, please select the installaon guide language and press the buon“ ”.
5.2 When the window “Welcome to use JC Cam Installaon Guide” pops up, please click
the buon “ ”.
5.3 When the window “Please select the target locaon” pops up, click “Browse” to
choose the le path for installaon (usually default), and then click “ ” to
connue.
Page 9
5.0 Installaon of JC CAM Soware for Windows PC
5.4 When following window appears, select the shortcut you need, and then click the
buon“ ”.
5.5 Conrm informaon like “the target locaon” of soware installaon. Aer
conrmaon, please click the buon“ ”.
5.6 An installaon progress bar will appear during the soware installaon procedure.
The soware installaon necessitates the registraon of some runme libraries, which
might be intercepted by some anvirus soware. If such intercepon pops up, please
allow the procedure to connue.
Page 10
5.0 Installaon of JC CAM Soware for Windows PC
5.7 An installaon progress bar will appear during the soware installaon procedure.
When the following window appears, the soware has been installed successfully. Then
click the buon “ ” to complete the installaon.Aer closing the window, check
the icon “ ” on your desk. If you fail to nd it, please nd it from the path
“Start”→“All programs”.
:
***For any installaon problems, please contact your local distributor.***
Page 11
6.0 Installaon of JC CAM Soware for Android/IOS
6.1 Go to google play store or apple app store search “ucam plus” scan the QR code
Ucam plus app only for direct show image, photo capture and video recording.
We have Two App for you to choose which one suitable.
(Android Device) (IOS Device)
UCAM PLUS Installaon
6.2 Click install “ucam plus”
(Android Device) (IOS Device)
For IOS
For Android
Page 12
6.0 Installaon of JC CAM Soware for Android/IOS
6.1 Use the smart terminal device to scan the QR code and download and install [KoPa
WiFi Lab] as prompted. Or go to google play store or apple app store search “KoPa WiFi
Lab”
KoPa WiFi Lab app is JC LAB new developing app. It contain many annotaon tools for
you do in the app. Not only for direct show image, photo capture and video recording. It
also can measurement, drawing and Labelling in preview mode.
KOPA WIFI LAB Installaon
6.2 Aer the APP download is complete, follow the prompts to allow installaon and
allow all authorizaons. Clicking "Not Allowed" will result in an inability to connect
properly.
For Android users, if you can log in to the Google App Store, you can click one of the
two buons to download.
For Android users in mainland China, please click the buon to download iOS system
users please click the buon to download
iOS system users please click the buon to download
For IOS For Android
Page 13
7.0 Connecon JC CAM for Windows PC
7.1 Connect the Type-C port of the USB cable to the USB port of the computer. (if
desktop computer, suggest you insert to USB port (back side of computer).
We have two connecon method for you to choose which one suitable.
USB Mode
7.2 Turn the Wi-Fi Digital Camera work mode switch to USB work mode. It may appear
the reminder for installing device’s driver when you rst use the Wi-Fi Camera Eyepiece
and then system will nish installaon automacally.
Switch to USB work mode
7.3 Place the WiFi Digital Camera soundly and align the lens to the observaon object.
7.4 Execute the JC Cam Install soware in your computer to observe your needed
image.
7.5 For more detailed instrucons of soware, please refer to chapter of JC CAM
Soware instrucon.
Page 14
7.0 Connecon JC CAM for Windows PC
7.6 Please switch the hardware switch of Wi-Fi camera to Wi-Fi working state in
advance
Wi-Fi Mode
Switch to Wi-Fi work mode
7.7 Connect your computer to the Wi-Fi camera, please conrm that your computer has
a wireless network in advance. Since the default of our camera is 5G Wi-Fi IEE 802.11ac
protocol, please conrm in advance that your computer wireless network supports this
protocol. If not, please refer to the hardware specicaon of the camera and switch the
camera to 2.4G WiFi IEE 802.11b before connecng with the PC.
7.8 Aer starng the Wi-Fi camera, search for Wi-Fi name (WiFiCamera_5G_xxxx) in the
network connecon. The default connecon password is 12345678
7.9 Aer Connected to the Wi-Fi, Open the JC Cam soware. Select the " " buon in
the shortcut toolbar, and then select" WiFi Camera "from the "
selecon in the upper right corner of the soware. Wait a moment for the PC to connect
to the Wi-Fi camera.
Page 15
8.0 Connecon UCAM Plus/KoPa Edu for IOS/Android
8.1 Ensure you app is installed. Go to Seng of you android phone/tablet or IOS
iphone/ipad.
We have Two App for you to choose which one suitable.
Ucam plus
8.2 Go to Wi-Fi selecon page and search for Wi-Fi name (WiFiCamera_5G_xxxx)in the
network connecon. The default connecon password is 12345678
(Android Device) (IOS Device)
(Android Device) (IOS Device)
8.3 Aer Connected Wi-Fi, Open the Ucam Plus app then tap the camera icon in the app
menu.
Page 16
8.0 Connecon UCAM Plus/KoPa Edu for IOS/Android
8.4 Ensure you app is installed. Go to Seng of you android phone/tablet or IOS
iphone/ipad.
KOPA WIFI LAB
8.6 Aer Connected Wi-Fi, Open the KoPa Wi Lab app. Scanned using the built-in QR
code scanner of the APP to directly connect and acquire images.
(Android Device) (IOS Device)
8.5 Go to Wi-Fi selecon page and search for Wi-Fi name (WiFiCamera_5G_xxxx)in the
network connecon. The default connecon password is 12345678
(Android Device) (IOS Device)
Page 17
9.0 JC CAM Soware Instrucon
9.1 JC CAM Soware Operaon Interface and Instrucon
9.2 Manu panel Page 18 - 19
9.3 Shortcut toolbar Page 20 - 22
9.4 Working mode Page 23 - 24
9.5 Camera control Page 25 - 27
9.6 Measuring tool Page 28 - 29
9.7 Drawing tool Page 30 - 31
9.8 Annotaon tools Page 31
9.9 Eraser and Image Filters Page 32
9.10 Calibraon and measurement Page 33 - 36
9.11 Thumbnail display area Page 37 - 39
Page 18
9.0 JC CAM Soware Instrucon
9.2 Manu Panel
★Depth-of-eld fusion and image stching are only available for specic models of
products. If there is no display of these funcons on the soware, it means that the
product does not have these two funcons.
The menu Funcons are as follows:
Table of contents
