JCG JHR-N916R User manual

www.jcgcom.com 1
300Mbps High Power Gigabit
Wireless Router
User Manual
Version: V1.0
Date: 2013.02.01
Copyright :
Copyright © 2013 Shenzhen Yichen Technology Development Co., Ltd.
All rights reserved.
JCG is a registered trademark of Shenzhen Yichen Technology Development Co., Ltd.
Without the express written permission from Shenzhen Yichen Technology Development
Co., Ltd., no organization or individual is allowed to imitate, duplicate, copy, translate or
use for other purposes. All other trademarks or registered trademarks in this document are
owned by their holders and protected by the relevant laws.
The product specifications and information mentioned in this manual are for reference
only, and no further notice will be provided for possible content update. For more detailed
product information, please visit our offi cial website: http://www.jcgcom.com.

www.jcgcom.com 3
Chapter I Introduction
Thank you for purchasing JCG 11N series WLAN router, which integrates the router, switch,
wireless access point with the fi rewall and adopts the most advanced MIMO (multiple input
multiple output) technology to increase the wireless transmission rate over 3 times of the
initial 802.11g standard. It supports 64/128-bit WEP encryption and the advanced encryption
and security features like WPA and WPA2. With the WPS encryption function, you can
easily set up the secure wireless network environment. And with the provided setup guide,
you can easily set up the router, remotely access and manage the router anytime anywhere
via the Internet. JCG 11N series WLAN router is a series of cost-effective products specially
designed for small–size enterprises, families and student’s dormitory to meet their needs for
wireless Internet access. It’s the best choice for you to enjoy the wireless Internet access
and the fun from wireless connectivity.
JCG 11N series WLAN router is simple to set up, which can be installed and set up using
the operation manual without professional assistance. Before you are ready to install and
use this product, please read the manual carefully for better understanding and use of the
full functionalities of this product.
1.1 Purpose and Defi nitions
This manual is used to help you familiarize with the JCG 11N series WLAN router and use it
properly. To avoid ambiguity, we defi ne the terms used in this manual as follows:
Router: refers to JCG 11N series WLAN router, unless otherwise specifi ed.
Modem: network service access device. It can be xDSL, Cable Modem, GPON or EPON,
etc.
Computer/ host: refers to desktop computer, laptop or all the network Client in a broader
sense.
NIC: refers to the wired or wireless network interface card (NIC) for network connectivity.
ISP:
Internet service provider, refers to the company or organization providing Internet
services.
AP: wireless network access point, it may refer to the wireless router providing wireless
network access services.

www.jcgcom.com 4
STA: wireless client/station, refers to wireless client devices, such as laptop, mobile phone
and tablet PC etc.
Client: wired or wireless client, including but not limited to computer, laptop, mobile phone
and tablet PC etc.
Chapter II Hardware Installation
2.1 Panel and Interfaces
JHR-N916R/N926R/N926R+
1.Power LED
Off: powered off
On: powered on
2.Wireless status LED
Off: wireless radio off
On: wireless radio on
Blinking: wireless data transmitting

www.jcgcom.com 5
3.Security LED
Off: wireless network unsecured
On: wireless network secured
Blinking:Firmware Upgrading
4.LAN status LED
Off: LAN port unconnected
On: LAN port connected
Blinking: LAN data transmitting
5.WAN status indicator
Off: WAN port unconnected
On: WAN port connected
Blinking: WAN data transmitting
6.LED digital display
Digital display of online hosts
7.Power jack (DC IN)
Connect to power adapter
8.WAN (Internet) port
WAN port
9.LAN 1-4 ports
LAN ports
10.WLAN (wireless) button
1) Switch on/off the wireless network
2) Wireless radio power regulation (available on JHR-N926R/N926R+ only)
11.RST/WPS button
When the router is working, press this button for 1 second to start WPS progress; press this
button for more than 5 seconds to restore to factory settings.

FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Other manuals for JHR-N916R
1
This manual suits for next models
1
Table of contents
Other JCG Wireless Router manuals