JD Williams and Co WN064 User manual

WN064 500W Food Processor
INSTRUCTION MANUAL
- FOR HOUSEHOLD USE ONLY -

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions before using this food chopper.
2. To protect against risk of electrical shock, do not put cord, plug, or base in water or
other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Call our toll-free customer
service number for information on examination, electrical repair, mechanical repair, or
adjustment.
7. The use of attachments not recommended or sold by the manufacturer may cause fire,
electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface, including
stove.
10. Keep hands and utensils away from moving blades while processing food to reduce
the risk of severe injury to persons or damage to the food chopper. A scraper may be
used but must be used only when the food chopper is not running.
11. Blades are sharp. Handle carefully.
12. This appliance is intended for processing small quantities of food for immediate
consumption. This appliance is not intended to prepare large quantities of food at one
time.
13. To reduce the risk of injury, never place cutting blade on base without first putting bowl
properly in place.
14. Be certain cover is securely locked in place before operating appliance.
15. Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
SPECIAL INSTRUCTIONS:
A short power supply cord is provided to reduce the risk of becoming entangled in or
tripping over a longer cord. Extension cords are available and may be used if care is
exercised in their use.
The marked electrical rating must be at least as great as that of the product.
Arrange the longer cord so that it will not drape over a countertop or tabletop ,where it
can be tripped over, snagged, or pulled on unintentionally (especially by children).
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
CONSUMER SAFETY INFORMATION
This appliance is intended for household use only.
Before First Use
Remove any packaging materials or promotional labels before first use. Wash the
chopper cover and jar in warm, soapy water. Dry thoroughly.
Care should be taken when cleaning the blades, which are very sharp.

Parts
Choosing a speed for all functions
Tool/Attachment
Function
Speed
Maximum
capacities
Blade
Grind meat
2
300g meat
Discs-slicing/
shredding/
chipping
Slicing/shredding/chipping
food and vegetables such as
carrots, cheese.
1-2
To Use the Food Processor
1. Fit the detachable shaft onto the power unit (circle 1).
2. Then, fit the bowl (circle 2). Place the handle towards the back, turning anticlockwise
till a “click”sound is heard. The bowl is now securely fitted on the power unit.
3. Fit an attachment over the drive shaft.Always fit the bowl and attachment onto the
machine before adding ingredients.
4. Fit the lid (circle 3), ensuring the top of the drive shaft locates into the centre of the lid.
Do not use the lid to operate the processor. Always use the on/off control.
5. Switch on and select a speed.
The processor won't work if the bowl and the lid are fitted incorrectly.
Use the pulse (p) for short bursts. The pulse will operate for as long as the control is
held in position.
6. Reverse the above procedure to remove the lid, the attachments and the bowl.
Always switch off before removing the lid.
Important
Your processor is not suitable for crushing or grinding coffee beans, or converting
granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures, avoid contact with the plastic
as this may result in permanent marking.
Processor
1.Power unit
2.Drive shaft
3.Bowl
4.Lid
5.Feed tube
6.Pushers
7.Safety interlock
8.Speed control
9.Blade
10.Thick slicing/coarse shredding disc

Hints
Blade
1. Cut food such as meat, bread, vegetables into approximately 2 cm (3/4 in.) cubes
before processing.
2. Biscuits should be broken into pieces and added down the feed tube whilst the
machine is running.
3. When making pastry, use fat straight from the fridge cut into 2 cm (3/4 in.) cubes.
Take care not to over-process.
Thick slicing/coarse shredding disc
Reversible slicing/shredding disc
1. Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
2. Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, courgette,
beetroot and onions.
Use to cut potatoes for julienne style French fries, and firm ingredients for salads,
garnishes, casseroles and stir fries (e.g. carrot, swede, courgette and cucumber).
Safety
Never remove the lid until the cutting disc has completely stopped.
Handle the cutting disc with care –it is extremely sharp.
To Use the Cutting Disc
1. Fit the drive shaft and bowl onto the power unit.
2. Holding by the centre grip (d), place the cutting disc onto the drive shaft with the
appropriate side uppermost (e).
3. Fit the lid.
4. Choose which size feed tube you want to use. The pusher contains a smaller feed
tube for processing individual items or thin ingredients.
To use the small feed tube, first put the large pusher inside the feed tube.
To use the large feed tube, use both pushers together.
5. Put the food in the feed tube.
6. Switch on and push down evenly with the pusher- never put your fingers in the feed
tube.

Hints
Use fresh ingredients.
Don't cut food too small. Fill the width of the large feed tube fairly full. This prevents
the food from slipping sideways during processing. Alternatively, use the small feed
tube.
When using the chipper disc, place ingredients horizontally.
When slicing or shredding: food placed upright (f) comes out shorter than food placed
horizontally (g).
There will always be a small amount of waste on the plate or in the bowl after
processing.
Care & Cleaning
1. Always switch off and unplug before cleaning.
2. Handle the blades and cutting discs with care - they are extremely sharp.
3. Some foods may discolour the plastic. This is perfectly normal and won't harm the
plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
4. Power unit: Wipe with a damp cloth then dry. Ensure that the interlock area is clear
of food debris.
5. All other parts: Wash by hand then dry. Alternatively, they can be washed on the top
rack of your dishwasher. A short low temperature programme is recommended.
Customer Care
If the cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Electrical Specifications
Max Voltage
Frequency
Max Wattage
220-240V AC
50 Hz
500W

Plug Wiring (UK)
This appliance is fitted with a BS1363 13 amp plug. If you have to replace the fuse,
only those that are BSI approved to BS1362 and with a rated current of 3 amps should
be used. Spares fuses are available from electrical stores. If the plug outlets in your
home are not suitable for the plug of this product, the plug must be removed and
disposed of safely as insertion of the plug into a socket is likely to cause electric
hazard.
A replacement plug should be wired according to the following instructions.
If in doubt, contact a qualified electrician.
This appliance must be earthed. The wires in the cord set are coloured in the
following way: BLUE-NEUTRAL. BROWN-LIVE, GREEN&YELLOW-EARTH
The wire that is coloured blue must be connected to the terminal that is marked
with the letter N.
The wire that is coloured brown must be connected to the terminal that is marked
with the letter L.
The wire that is coloured green & yellow must be connected to the terminal in the
plug that is marked with the letter E or marked with symbol.
If the supply cord is damaged a qualified person must replace it in order to avoid a
hazard.
DISPOSAL
The packaging material is recyclable. Dispose of the packaging in an
environmentally friendly manner and make it available to the collection
service for recyclable materials.
Dispose of the device in an environmentally friendly manner when you
decide to part with it. The device does not belong in the household waste.
Dispose of it at a recycling centre for old electrical and electronic devices.
For more information, please contact the administration in your community.