Jeep GRAND CHEROKEE 2021 User manual

Jeep®Cherokee
QUICK
START
GUIDE

Light Controls 4WD Controls
HomeLink® Buttons
Cruise Control
Buttons
Instrument Cluster/
VR Control Buttons
Power Liftgate
Hood Release
Memory Seat
Controls
Radio On/O Stop/Start
OFF Button
USB Ports
Tune/Browse
VEHICLE OVERVIEW

HomeLink®
GARAGE DOOR OPENER
While the car is ON, hold the hand-held garage door transmitter 1-3 inches
from the HomeLink®button you want to program in the vehicle.
1
Push and hold both the HomeLink® button being programmed and the button
on the garage door transmitter.
2
Push and hold the two outside HomeLink® buttons for 20 seconds until the orange
indicator ashes. An individual channel cannot be erased.
TO ERASEERASE ALL SET CHANNELS:
For Non-Rolling CodeFor Non-Rolling Code garage door openers, watch for the indicator light to
go constant.
For Rolling CodeFor Rolling Code garage door openers, watch for the indicator light to go from
a slow blink to blinking rapidly.
3
For Rolling CodeFor Rolling Code garage door openers only, rmly push and release the
“LEARN” or “TRAIN” button on your garage door opener motor in your garage,
then push the HomeLink®button in your vehicle for two long presses.
4
If the programming was successful, your garage door should open and close
with your chosen HomeLink®button.
5
Check your garage door opener motor in your garage for a “LEARN”
or “TRAIN” button by the hanging antenna. If you have one of these,
you have a Rolling Code garage door opener.
ROLLING OR NON-ROLLING?
?
For more detailed instructions, see “Universal Garage Door Opener
(HomeLink®)” in your Owner’s Manual. Please call 1-800-355-3515 if
you require assistance.
LINK YOUR GARAGE DOOR

Hands-Free Liftgate
Use a Straight
In-and-Out Kicking Motion
Activation Zone
Make sure your kicking motion is straight
in and out, and within the activation zone.
Please note, this feature is available only
on vehicles equipped with Passive Entry.
LIFTGATE NOT OPENING?
?
Do not move your foot sideways or
in a sweeping motion; the sensors
may not detect the motion.
X
HANDS-FREE LIFTGATE & DRIVER MEMORY
Driver Memory Settings
CREATE A MEMORY PROFILE
MEMORY POSITION RECALLMEMORY POSITION RECALL
To recall the memory settings, push the Memory button that was set or the Unlock button
on the key fob linked to that memory position.
Place the vehicle’s ignition in the ON/RUN position.
1
Adjust all memory prole settings to your desired preferences, including:
• Driver seat
• Easy Entry seat (if equipped)
• Side mirrors
• Radio station presets
2
Push and release the Set (S) button on the driver's door trim panel, and then push
the Memory button (1) or Memory button (2) within ve seconds. Each of your two
key fobs can be linked to a memory position.
3
Memory proles can be set without the vehicle in PARK, but the vehicle must be in PARK
to recall a memory prole.
KEEP IN MIND:KEEP IN MIND:

Connected Services
WITH CONNECTED SERVICES YOU CAN...
Lock Your Vehicle
Unlock Your Vehicle
Remote Start Your Vehicle
Cancel Remote Start
Activate Your Horn
You can use your remote commands from the
Uconnect App, your Owner’s Site account, or by
calling an agent.
However, not all remote commands will work when
calling the agent.
TIP:
ACTIVATE YOUR REMOTE SERVICESACTIVATE YOUR REMOTE SERVICES
1
Press "Apps" on the touchscreen.
2
Press "Activate Services".
3
Press "Activate Now".
4 There are two ways to activate: via email or via
an agent. On the next screen, you can either
enter your name and email, or press "Call An
Agent" to directly speak with someone.
Mopar®YOURYOUR Way
REAP THE BENEFITS OF YOUR OWNER'S PROFILE
Get an online experience all your own—tailored to you and your vehicle—accessible
anytime, anywhere.
24/7 Access to Everything You Need
Custom dashboard for every vehicle in your garage
Access to your vehicle's Owner's Manual, warranty & more
Ability to set preferred dealer & schedule service with ease
Maintenance records and up-to-date vehicle health reports**
Special oers on exceptional Mopar®service at your dealership
Remote vehicle commands right from your mobile device**
** Requires an active SiriusXM GuardianTM subscription
*Canadian residents are not required to create a prole, as one is created when a SiriusXM GuardianTM account is activated.
UTILIZE YOUR SERVICES & OWNER PROFILE

PairPair a Phone
Some mobile phones will require you to enter a PIN as part of the connection process.
For more detailed connecting instructions, refer to “Phone Operation” in your
Uconnect Owner's Manual Supplement.
KEEP IN MIND:KEEP IN MIND:
11Make sure Bluetooth®is enabled on your mobile device.
22With the vehicle in the ACC or ON/RUN position, press the
Phone button on the vehicle’s touchscreen menu bar.
33Press “Pairing” and then press “Paired Phones and
Audio Devices”.
44
Select “Add Device” then follow the prompts on your phone
and on the touchscreen.
Ready to removeremove a phone or audio device?
Press the “Pairing” button on the touchscreen.
Press “Paired Phones and Audio Devices”.
Press “Settings” next to the phone or device you want to remove.
Press “Delete Device”.
Press “X” to exit the settings screen. The device should be removed.
2
3
4
1
5
YOU MAY ALSO BE ABLE TO CONNECT YOUR APPSCONNECT YOUR APPS
KEEP IN MIND:KEEP IN MIND:
For AndroidFor AndroidTMTM Users,Users, if the Android AutoTM App was not previously downloaded, it will download
the rst time you plug in your device.
For AppleFor Apple®®Users,Users, Apple CarPlay®is only compatible with iPhone5®or later and requires Siri being
enabled in Settings.
If your vehicle is equipped with Android AutoTM & Apple CarPlay®, connect your unlocked smartphone to one of
the media USB ports in your vehicle.
Once connected and recognized, the Android Auto
TM
or CarPlay
®
icon will replace the phone icon on your personalized
menu bar.
CONNECT YOUR PHONE

Lights & Wipers Operation
Parking Lights & Instrument
Panel Lights
Headlights, Parking Lights &
Instrument Panel Lights
TO ACTIVATE HIGH BEAMSHIGH BEAMS
PUSH
FOR FLASH-TO-PASSFLASH-TO-PASS
PULL
Ambient Light Dimmer Control
Instrument Panel
Dimmer Control
Fog Lights
USE YOUR LIGHTS & WIPERS
PULL
TO ACTIVATE THE
FRONT WINDSHIELD WASHERFRONT WINDSHIELD WASHER
PUSH UP
TO MISTMIST THE WINDSHIELD
PUSH FORWARD
TO ACTIVATE THE
REAR WINDSHIELD WASHERREAR WINDSHIELD WASHER OFF
HIGH
INT
LOW
Front Wipers
Rear Wipers ON
Rear Wipers OFF

Active Driving Assist Systems
The LaneSense systemLaneSense system warns you if your vehicle drifts out of the lane without
a turn signal applied. Your vehicle may provide a visual warning, apply pressure
to your steering wheel, or both. LaneSense can be enabled or disabled using the
button on the switch panel below the Uconnect display.
The Forward Collision Warning systemForward Collision Warning system provides
the driver with audible and visual warnings, and may
apply a brake jerk to warn the driver when it detects a
potential frontal collision.
The Adaptive Cruise Control systemAdaptive Cruise Control system will adjust
the speed you have set in order to maintain a set
distance from the vehicle in front of yours.
The Cruise Control systemCruise Control system will hold your vehicle’s speed when you
take your foot o of the accelerator.
The ParkSense systemParkSense system alerts you when an obstacle is detected when backing up or moving forward.
It can also detect obstacles on the sides of your vehicle within a specied range. The brakes may be
automatically applied and released during a reverse parking maneuver if the system detects a possible
collision with an obstacle.
The Blind Spot Monitoring systemBlind Spot Monitoring system uses sensors
to detect vehicles that enter the blind spot zones from
the rear, front, or side of the vehicle.
The ParkSense Active Park Assist systemParkSense Active Park Assist system aids you in parallel and perpendicular
parking maneuvers by identifying a parking space, providing audible and visual instructions,
and controlling your vehicle’s steering wheel. You maintain control of the gear selector,
accelerator, and brake pedals during these maneuvers, which also includes exiting a
parallel parking space.
You can use your radio to adjust the Blind Spot Monitoring
alerts to include lights on the outside mirrors only, lights
and an audible chime, or turn the alerts o entirely.
KEEP IN MIND:KEEP IN MIND:
UNDERSTAND YOUR DRIVING AIDS

©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Jeep is a registered trademark of FCA US LLC. Jeep est une marque déposée de FCA US LLC.
App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.
Warning & Indicator Lights
For additional information on any of the topics in this publication, please refer to your Owner’s Manual.
Service Stop/Start
System
Engine Check/
Malfunction
LaneSense
Anti-Lock Brake
System (ABS)
Oil Temperature
Electronic Throttle
Control (ETC)
Air Bag
Adaptive Cruise Control
(ACC) Set No Target
Battery Charge Brake Door Open Electric Power
Steering Fault (EPS)
Engine Temperature Hood Open Liftgate Open
Seat Belt Reminder Transmission
Temperature
Fuel Cuto
Electronic Stability
Control (ESC) OFF
Electronic Stability
Control (ESC) Active
Low Washer Fluid
Low Fuel
Low Coolant Level
Service LaneSense
Rear Fog
Electronic Park Brake
Diesel Particulate Filter (DPF)
Cleaning In Progress
Tire Pressure Monitoring
System (TPMS)
Front Fog
Immobilizer Fail / VPS
Electrical Alarm
4WD Lock
Service Forward
Collision Warning (FCW)
Service 4WD Service Adaptive Cruise
Control (ACC)
Adaptive Cruise Control
(ACC) Set With Target
Water In Fuel
LaneSense
Turn Signal
Stop/Start Active
Forward Collision
4WD Low
Parking/Headlights On
Towing Hook Breakdown
Wait To Start
Forward Collision
Warning (FCW) OFF
Oil Pressure
Vehicle Security
Speed WarningLaneSense
High Beam
Hill Descent
Control (HDC)
Cruise Control SET
Automatic High Beam
Cruise Control Ready
Third Edition
KL_QSG_EN_USC_AA
Rear Axle Lock
Cruise Control Fault