Jenn-Air JEF3115G User guide

JENN-AIR®DETAILED PLANNING DIMENSIONS 1 of 2
8997AdZw217
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
PRODUCT DIMENSIONS
MODEL # JEF3115G
in cm
AOverall width 15 38.1
BOverall depth 21 53.3
CCenter of cooktop to center of
electrical conduit 539⁄64 14.2
D* Width of cooktop base 1419⁄64 36.3
EHeight from electrical conduit to
underside of cooktop 513⁄32 13.7
FThickness of cooktop surface 11⁄43.2
GHeight from underside of cooktop base
to top of control knob 51⁄214.0
HDepth of cooktop base 2019⁄64 51.6
IHeight of cooktop base 41⁄410.8
JHeight from bottom of electrical
conduit to underside of cooktop base 11⁄43.2
*Measured from tab to tab. Tabs should not be bent during installation.
A
B
C
H
B
D*
F
E
I
J
G
FRONT VIEW
TOP VIEW
SIDE VIEW
A
B
C
H
B
D*
F
E
I
J
G
A
B
C
H
B
D*
F
E
I
J
G

JENN-AIR®DETAILED PLANNING DIMENSIONS 2 of 2
8997AdZw217
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air®appliances are appropriately UL, CUL or CSA approved.
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
OPENING/CLEARANCE DIMENSIONS
D* G
E
A
BB
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
E
A
BB
I
K
J
H
C
e
F
Side
Cabinet
H
D*
G
E
A
BB
I
K
J
H
C
e
F
Side
Cabinet
H
MODEL # JEF3115G
in cm
AWidth of combustible area above
cooking surface (min.) 15 38.1
BWidth from cooktop to fixed wall or
other combustible material (min.) 615.2
CWidth to outer edge of outlet (max.) 9 23.0
D* Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.) 30 76.2
EHeight to bottom of uncovered wood or
metal cabinet (min.) 18 45.7
FHeight to top edge of outlet (min.) 7 17.8
GDepth of upper cabinet 13 33.0
HDepth from cutout to wall (min.) 25⁄86.7
IWidth of cutout (recommended) 143⁄836.5
JDepth of cutout (recommended) 203⁄851.8
KDepth from cutout to front of countertop 25⁄16 5.9
eRecommended electrical access location
*Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
FRONT VIEW
ELECTRICAL REQUIREMENTS
A 240 Volt, 60 Hz, AC only 15-amp fused, grounded electrical circuit is
required. A time-delayed fuse or dedicated circuit is recommended.
A grounded 3-prong outlet should be located in the back of the cabinet.
Do not use an extension cord.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout
• If cabinet has a drawer, allow a 51⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
TOP VIEWSIDE VIEW