Jensen VM9224BT User manual

VM9224BT
Operating Instructions

VM9224BT
CONTENTS
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's
manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to
use all the features of your new Jensen VM9224BT Mobile Multimedia Receiver for maximum
enjoyment.
Features 1
Controls and Indicators 4
Operating Instructions 6
Setup Menu......................................................................................................................... 11
Tuner Operation 17
DVDNCD Video Operation 21
DVD/CD Audio Operation 27
MP3IWMA Operation 30
iPod® Operation 34
Bluetooth Operation............................................................................................................ 38
Troubleshooting 45
Specifications 49
iii

VM9224BT
FEATURES
Congratulations on your purchase of the Jensen VM9224BT Mobile
Multimedia Receiver.
It's agood idea to read all
of the instructions before beginning the installation.
We recommend having your Jensen VM9224BT installed by areputable
installation shop.
DVD
•Fast Forward/Reverse -2X, 4X, 8X and 20X
•Slow Motion Forward/Reverse -1/2,
1/4, 1/6 and 1/8
•Play, Pause, Stop, Next Chapter and Previous Chapter
CDIMP31WMA
•CD-Text Compatible
•ID3
Tag Compatible
•Directory Search (MP3 /WMA Only)
•Burn up to 1500 MP3 and WMA Files onto aDVD+R /RW
•Audible Forward IReverse Track Search (CD-DA Only)
•Random, Repeat and Intro
•Play, Pause, Stop, Next Track and Previous Track
AM-FM
•USA IEurope /Latin America IAsia Frequency Spacing
•30 Station Presets (18 FM 112 AM)
•Auto Stereo /Mono
•
Local/Distance
•Auto Store /Preview Scan
iPocP
•iPod via USB
•High Speed Direct Connect Interface to Access iPod Playlists, Artists,
Albums and Songs. Play music and viewvideo/photo* files from your iPod.
*Video/photo playback requires jUnk-USB iPod interface cable (sold
separately).
•Power Management Charges iPod while Connected
Chassis
•2.0 DIN (Import IISO-DIN Mountable)
•Fixed Front Panel
•6.2" High Definition TFT LCD
•1,152,000 Sub Pixels (800x3 X480)
•Beep Tone Confirmation (ON-OFF Option)
•Heat Management System -Forced-Air Cooling
To Keep The Chip-Sets
Operating at Nominal Temperatures
General
•Navigation Ready (NAV102) 1

VM9224BT
•Built-in Bluetooth, providing hands-free profile for safety and convenience
and A2DP profile for streaming music from aPDAlPMP
•One Composite Video Output for Additional Screens
•Front Panel AudioNideo Input
•Three-Band Tone control (Bass, Mid and Treble) with Eight Preset EQ
Curves
•Front Panel
AN Aux Input for Portable Media Devices
•Front, Rear and Subwoofer Line Output
•Programmable Volume Control
•Rear Camera Input (Normal and Mirror Image View)
•Touch Screen Calibration Mode
•2VRMS Line Output -All Channels
•Rotary Encoder Audio Control
•SWC Interface -Compatible with PAC adapter SWI-PS Steering Wheel
Control Interface (sold separately)
Optional Equipment
•NAV102
The VM9224BT is "navigation ready." Before accessing any navigation
features, you must purchase and install the navigation module (NAV102).
All installation and operating instructions will be included with the
navigation module.
Once the navigation module is connected and operating properly, the NAV
source mode will become active. While the navigation module is not
installed, the NAV option appears gray, indicating the function is not
available.
•Bluetooth Phone
See "Bluetooth Operation" on page 38.
•Rear Camera
The VM9224BT is "camera ready." Before accessing any camera features,
you must purchase and install arear video camera. Once the camera is
connected and operating properly, the CAMERA source mode will become
active. While the camera is not installed, the CAMERA option appears
gray, indicating the function is not available.
WARNINGI Neverinstall this unit where operation and viewing could
interfere with safe driving conditions.
WARNINGI
To reduce the risk of atraffic accident(except when using for
rear view video camera)
never use the video display function while
driving the vehicle. This is aviolation
of federal law.
2

VM9224BT
WARNINGI Neverdisassemble or adjust the unit.
WARNINGI
To prevent injury from shock or fire, never expose this unit to
moisture or water.
WARNINGI Neveruse
irregular discs.
WARNINGI
To prevent damage to the mechanism inside this unit, avoid
impact to the TFT monitor.
WARNINGI The
monitor employs an automatic motorized mechanism. To
prevent damage to the core mechanism, please do not push, pull or
swivel the monitor manually.
3

VM9224BT
CONTROLS AND INDICATORS
1. Disc Slot
2. RESET
Press to reset system settings to factory default (except password and
parental lock settings).
3. EJECT
Press to eject adisc.
Press and holdto reset core mechanism position.
4. SRC
Press to turn the unit on. Press and holdto turn the unit off.
When on, press once to select playing mode.
5. NAV
Press to display the navigation user interface.
6. TFT Display
7. Rotary Encoder
Rotate to adjust the volume. While in the audio menu, press and release to
enter and/or confirm audio settings.
Press to activate the MUTE function and silence the receiver. Press again to
resume sound.
Press and hold to activate the Local (LOC) setting. Press andhold again to
turn Local reception off.
8. USB/SO Interface Connector
Connect aUSB device or insert an SO card for playback of music/video files.
9. AlVlnput
Attach acompatible AN device.
4

VM9224BT
5

VM9224BT
OPERATING INSTRUCTIONS
Power On / Off
Press the 0/SRC button (4) to turn the unit on. The buttons on the front of the
unit light up and the current mode status appears
on the LCD (7).
Press and hold the 0button to power
off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder button (7) to mute the volume from the unit. Press the
rotary encoder button again to restore the volume. "MUTE" is displayed
on the
LCD. Adjusting the volume or using any
of the audio setup features cancels
the mute function.
Ifthe "MUTE" wire is connected, audio output mutes when atelephone call is
received by the car phone or when verbal navigation is performed (using
optional NAV102).
Playing Source Selection
When the monitor is closed, press the SRC button (4) to change between
available audio playing sources
in the following order: RADIO, DISC, USB 1,
USB2, SO, BT, NAV, AUX and CAMERA.
Source Menu
You can also use the touch screen to change the source through the SOURCE
MENU.
To access the SOURCE MENU, touch the top left corner of the screen
or press the SRC button (4).
RADIO
SOURCE MENU
0@
tf tf
~
RADIO DISC USB1 USB2
SO
*
EB
~~
~
BT NAV AUX
CAMERA
6

VM9224BT
Touch the RADIO, DISC, USB1, USB2, SO, BT, NAV, AUX orCAMERA button
to select the corresponding source.
NOTE: If an iPocP is attachedto aUSB1 port, IIIPOD" appears instead of
the text IIUSB1."
ExternalDevices
External peripheral devices, including agame console, camcorder, navigation
unit, iPod,
lune, etc. can be connected to this unit via RCA output using an
AN Media Adapter Cable (not included).
o
MUTE
RighI Audio ())~ ., V INPUT
~:~: II I C\j 0VM.22 ... '
Video Ql=J vv~~=="=='=====================
~
3.5mm AN Cable (nollnc:luded)
Connect the external device to the AN Media Adapter Cable and then plug the
cable into the
AN INPUT connector (9) on the front of the radio. Select "AUX"
or "AUX IN" (when monitor
is closed) mode to access auxiliary devices. You
cannot directly control external devices connected to the AN INPUT. For
information regarding the use of USB devices, see "Inserting aUSB Device
or
SO Card" on page 31.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder (7). When
the volume level reaches "0" or "40", abeep sounds, indicating that the
adjustment limit has been reached. The TFT screen displays the volume level
for 3seconds.
Programmable Turn-On Volume
This feature allows the user to select aturn-on volume setting regardless of
the volume setting prior to turning the unit off.
To program aspecific turn-on volume level, turn the rotary encoder (7) to
adjust the volume to the desired turn-on level. Push and holdthe rotary
encoderwhile the speaker icon and level indication is displayed on the screen.
The unit will beep to confirm your turn-on volume setting.
7

VM9224BT
~ [RESET] Button
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to
meet the acoustical characteristics of your vehicle, which vary depending
on
the type of vehicle and its measurements. Proper setting of the Fader and
Balance boosts the effects
of the cabin equalizer.
•Touch the EQ button
on the left side of the screen to display the audio
menu.
•Use the touch screen +/- buttons to adjust the settings for an audio
feature.
Table 1:
Audio Adjustments
Audio Function Adjustable Range
EO
User
Acoustic
Urban
Rave
Latin
Dance
Hip Hop
Rock
BASS -14 to +14
MID -14 to +14
TREBLE -14 to +14
SUB -14 to 0
FAD Grid
SAL Grid
NOTE: The EQ mode will automatically change to "USER" when
individual audio functions are adjusted.
The Audio menu will automatically exit after afew seconds of inactivity. To exit
quickly, touch the top left corner
of the screen.
System Reset
To correct asystem halt or other illegal operation, use the
tip
of apen to press the reset button (2) located on the front
bottom-left corner
of the unit. After asystem reset, the unit
restores all factory default settings.
8

VM9224BT
NOTE: If the unit is reset while aDVD is playing, the DVD resumes play
once the reset is complete.
Steering Wheel Control (SWC)
The VM9224BT is compatible with the PAC (Pacific Accessory Corporation)
steering wheel control adapter SWI-PS. A3.5mm female connector (labeled
"SWC Interface")
on the back of the head unit allows connectivity to the PAC
adapter. Please refer to the instructions included with the PAC adapter for
detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1. Vol Down
2. Vol Up
3. Mute
4. Seek Down /Previous Track /** Preset Down
5. Seek Up /Next Track /** Preset Up
6. SRC (Source)
7. ** Select
8. ** Select
9. Band
** Ifadditional steering wheel control buttons are available on the vehicle,
function
7/8 may be assigned the "Select" feature. This feature /function may
not
be available on some vehicles.
Select Operation
If "Select" (function 7or 8) is held down and function 4is pressed momentarily,
Preset Up will
be selected. If "Select" (function 7or 8) is held down and
function 5is pressed momentarily, Preset Down will be selected.
Image/Display Settings
Video Output Modes
Table 2shows the video output mode for each playing source.
Table 2: Video Output Modes
Playing Source Video
Output Modes
AM/FM TUNER RGB Mode
DVD RGB Mode
AUXIN
eVBS Mode
*CVBS -Composite Video Baseband Signal
9

VM9224BT
Picture Adjustment
To adjust monitor display settings, perform the f100wing steps:
1. Press andholdthe NAV button (5) to access the "BRIGHT" setting. Press
andhold twice to access the "CONTRAST" setting.
2. Turn the rotary encoder to adjust the setting level.
3. Press andholdthe NAV button (5) again to exit the picture adjustment
menu.
Parking Brake Inhibit
When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire
is grounded via the Parking Brake circuit, video will be
displayed.)
10

VM9224BT
SETUP IVIENU
To access system settings, touch the 0button on the screen to enter the
"SETUP" menu. The "GENERAL" sub-menu appears highlighted
in blue.
05:33AM
RADIO
SETUP MENU
RDS
General I Language I
Audio
I
Back
Bluetooth
(Clock Mode
l>]
Rating
12Hr
AM 1
Hardware
Clock
04: 31
P.VOL
[Tuner Region USA
l>]
TSCal
Beep On
l>]
DEMO
Accessing Menu Items
Touch the sub-menu name to select asub-menu (Language, Audio, RDS,
etc.). The features available for adjustment under the highlighted sub-menu
option will appear
in the center of the screen.
Adjusting a Feature
1. Use the touchscreen to select the feature to be adjusted.
2. Enter the option field for the feature you want to adjust by using the
touchscreen. Asubmenu appears in asecond row with the selected option
highlighted
in blue.
3. Select anew value using the touchscreen.
4. Use the touchscreen to confirm setup.
General Sub-menu Features
Setting
Options
Function
Clock Mode 12Hr Clock displays 12 hour time using AM and PM.
24Hr Clock displays 24 hour time up to 23:59.
Clock (HH:MM) Clock appears
in the top right corner of the screen and
on the LCD screen during certain operations. NOTE:
The AM/PM indication will change as you continue to
adjust the hour past
12.
11

~NSE~
VM9224BT
Setting Options Function
Tuner Region USA •AM Frequency Spacing -10kHz
•AM Frequency Band -530kHz-1720kHz
•FM Frequency Spacing -200kHz
•FM Frequency Band -87.5MHz-107.9MHz
S.Amer1 •AM Frequency Spacing -10kHz
•AM Frequency Band -530kHz-1720kHz
•FM Frequency Spacing -100kHz
•FM Frequency Band -87.5MHz-108.0MHz
Arabia •AM Frequency Spacing -9kHz
•AM Frequency Band -531kHz-1620kHz
•FM Frequency Spacing -100kHz
•FM Frequency Band -87.5MHz-108.0MHz
China •AM Frequency Spacing -9kHz
•AM Frequency Band -522kHz-1620kHz
•FM Frequency Spacing -100kHz
•FM Frequency Band -87.5MHz-108.0MHz
S. Amer2 •AM Frequency Spacing -5kHz
•AM Frequency Band -520kHz-1600kHz
•FM Frequency Spacing -100kHz
•FM Frequency Band -87.5MHz-108.0MHz
Europe •AM Frequency Spacing -9kHz
•AM Frequency Band -522kHz-1620kHz
•FM Frequency Spacing -50kHz
•FM Frequency Band -87.5MHz-108.0MHz
Korea •AM Frequency Spacing -9kHz
•AM Frequency Band -531kHz-1602kHz
•FM Frequency Spacing -200kHz
•FM Frequency Band -
88.1 MHz-107.9MHz
Beep Off No beep sounds
On When turned on, an audible beep tone confirms each
function selection.
Language Sub-menu Features
If aDVD supports more than 1Subtitle or Audio language, all the languages
are available for selection during playback.
If the selected language is not
supported by the DVD, then the default language is used.
Setting Options Function
Language English
On Screen Display appears in English.
Subtitle English DVD subtitles automatically appear
in English when avail-
able.
Auto DVD subtitles appear according to the default subtitle lan-
guage specified on the disc.
Off DVD subtitles do not appear.
Audio English DVD Audio is heard
in English when the option is available.
12

VM9224BT
Setting Options Function
DVD English DVD menu (if applicable) is displayed in English.
Menu
Audio Sub-menu Features
Setting Options Function
DRC Off Employ the Dynamic Range Control for better playback for
On low volumes.
Loudness Off Turn bass boost on/off
On
Sub- Off Turn the subwoofer on/off.
woofer
On
Sub Filter 80Hz Selecting acrossover frequency sets acut-off frequency of
120Hz
the subwoofer's LPF (low-pass filter).
160Hz
13

VM9224BT
RDS Sub-menu Features
Setting Options Function
RDS Off Turn On/Off RDS feature.
On
CT Off System time is syncronized with current broadcast station
On time (Clock Time). Setting this feature to On, will automati-
cally set your system clock.
Bluetooth Sub-menu Features
Setting Options Function
Bluetooth Off Disable Bluetooth function.
On EnableBluetooth function.
Connect Manual Connect the last active mobile phone by touching the CON-
NECT icon when disconnected.
Auto Automatically connect when your paired phone
is in range.
Auto Manual Manually answer calls by touching the "call" button.
Answer Auto The unit automatically answers all incoming calls.
Pairing The default code is "1234". Touch the keypad icon to open
Code the keypad and enter the pairing code or pass key required
for Bluetooth connection to your mobile phone. Not all
phones/devices require apairing code. The default code
is
"DODO" for many models.
Rating Sub-menu Features
The DVD system has abuilt-in parental lock feature to prevent unauthorized
persons from viewing restricted disc content. By default, the rating system
is
unlocked. Once setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is available for setup.
Setting Options Function
Set
----
Enter a4-digit password to activate the "Rating" feature.
Password
14

VM9224BT
Setting Options Function
Parental
1. Kid Select the appropriate rating level for the intended audience.
Ctrl Safe
2.G
You may override higher ratings by using your password.
3. PG
4. PG-13
5. PG-R
6.R
7. NC-17
8. Adult
Load Reset Select "Reset" to restore the factory default settings for the
Factory Rating system only.
To reset the password, access the "RATING" menu and enter the current
password. Once the correct password is entered, you can access the
"Password" field and enter anew one.
NOTE: Recordthe password and keep it in asafe place for future
reference.
The rating for each disc is marked on the disc, disc packing,
or documentation. If the rating is not available on the disc, the parental
lock feature is unavailable. Some discs restrict only portions of the disc,
allowing the appropriate content will play. For details, please refer to the
disc description.
Hardware Sub-menu Features
Setting Options Function
Camera In
Normal
Mirror Reverse the camera image as if looking through arear-view
mirror.
Video NTSC The color signals are output
in the standard NTSC format.
Input
PAL
The color signals are output in the standard PAL format.
(Input cir-
cuitry auto Auto The color signal output
is switched automatically based on
detects the current video input signal -NTSC or
PAL.
the video
signal
from the
Aux
In
source).
Ifthe monitor is in display mode, the monitor automaticallyswitches to
CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
15

VM9224BT
P. VOL Sub-menu Features
Setting
Options
Function
Source RADIO Choose asource for which you would like to increase the rel-
DISC ative volume (LEVEL).
USB1
USB2
SD
BT
NAV
AUX
CAMERA
Level 0-6 Increase relative volume for specified source up to 6deci-
bels.
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP menu, select the
"TS CAL" option.
After entering calibration mode, acrosshair +appears
in acorner quadrant of
the screen. To begin calibration, touch and hold the crosshair for one second
until it moves to the next quadrant. Continue for each quadrant until the
calibration is completed.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto Run on/off by
chooing the "Demo" option from the SETUP MENU.
When Demo "Auto Run" is Off, you can select
"Demo> Run" to start Demo
Mode. Demo scrolls through the various source screens, simulating activity on
the display. "Demo" is discreetly displayed
in blue text (below the clock), to
indicate the unit is in Demo Mode.
To stop Demo Mode, touch the upper-left
quadrant
of the TFT (Source select).
When Demo "Auto Run" is On, the unit will automatically display Demo Mode
when powered on.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, touch the BACK button on
the screen.
16

VM9224BT
nJNER OPERATION
Tuner TFT Display
~----t-i13
•
01:02 PM
19
t
•
~ ps ~
BAND !Q 1/2 MEM
6 7
I P1 87.5 MHz
Q
P2 90.1 MHz
P3 98.1 MHz
P4 106.1MHz
P5 107.9MHz
P6 102.9MHz
ps:
Ii 0
t./ @
7
~ PTY ~
,
AS !Q2I2 LOC
~4·~
1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Stereo broadcasting indicator
5. Strong Local signal broadcasting indicator
6. Preset radio stations: Touch to recall preset stations
7. Information about the current function
8. EQ: Touch for quick access to Equalizer level settings
9. I!!: Touch to access the direct entry screen
10. Current preset station indicator
11. I ...... :Touch to seek backward
12. ~~I: Touch to seek forward
13 . ...... :Touch to tune backward one step
14. ~~: Touch to tune forward one step
15. BAND: Touch to change between AM/FM bands
17