Jensen VM9313 User manual

VM9313
Installation and Operation Manual
Manual de Instruccionnes de
Instalaci6n yOperaci6n
Instructions d'installation et d'operation
16040WX!
__ ---I

~ VM9313
CONTENTS
Thank you for choosing aJensen product. We hope you will find the instructions in this owner's
manual clear and easy to follow. If you take afew minutes to look through it, you'll learn how to
use all the features ofyour new Jensen VM9313 Mobile Multimedia Receiver for maximum
enjoyment.
Introduction 1
Controls and Indicators 2
Remote Control 4
Using the TFT Monitor 7
Operating Instructions 8
Setup Menu 10
Tuner Operation 13
Satellite Radio Operation
15
DVDNCD Video Operation 17
DVD/CD Audio Operation 20
MP3IWMA Operation 21
iPod Operation 24
Bluetooth Operation 25
Troubleshooting 28
Specifications 31
CONTENIDO
Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual
instrucciones
c1aras y f,kiles de seguir. Si se toma unos pocos minutos para leerlo, aprendera
c6mo utilizar todas las funciones de su nuevo radio Jensen VM9313 para su maximo
entretenimiento.
Introducci6n 33
Controles eIndicadores
34
Control Remoto 36
Como Usar
el Monitor TFT 39
Instrucciones de Funcionamiento 40
Menu de Configuraci6n 42
Operaci6n de Sintonizador 45
Operaci6n de Radio Satelital 47
Operaci6n de Video de DVDNCD 49
Operaci6n de Audio de DVD/CD 53
Operaci6n de MP3IWMA 54
Operaci6n de iPod 57
Operaci6n de Bluetooth 58
Resoluci6n de Problemas 61
Especificaciones 64
TABLE DES MATIERES
Merci d'avoir choisi un produit Jensen. Nous esperons que vous allez trouver les instructions
dans ce guide de proprietaire claires et faciles asuivre. Prenez quelques minutes a
Ie
consulter, vous apprendrez autiliser toutes les fonctions de votre nouvelle radio Jensen
VM9313 pour en tirer une jouissance maximum.
Introduction 65
Commandes
et indicateurs........... 66
Telecommande 68
Utilisation de moniteur TFT 71
Instructions d'operation .. 72
Menu configuration............................................ 74
Operation Tuner... 77
Operation radio Satellite..................................................................................................... 79
Operation video DVDNCD 81
Operation audio DVD/CD .. 85
Operation MP3IWMA 86
Operation iPod 89
Operation Bluetooth 91
Depannage 94
Specifications: 97

~ VM9313
INTRODUCTION
Congratulations on your purchase of the Jensen VM9313
Mobile Multimedia Receiver.
It's agood idea to read all
of the instructions before beginning
the installation. We recommend having your Jensen VM9313
installed by areputable installation shop.
Features
DVDAspect Ratio -Full and Normal
Fast Forward -2X, 4X, 8X and 32X
Slow Motion -
1/2, 1/4, 1/6 and 1/7
Play, Pause, Stop, Next Chapter and Previous Chapter
CDIMP31WMA
CD-Text Compatible
ID3
Tag Compatible
Directory Search (MP3 IWMA Only)
Direct Track Access via Remote Control
Burn up to 1500 MP3 and WMA Files onto aDVD+R I
RW
Audible Forward IReverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
Tuner
HD Radio Tuner*
USA IEurope Frequency Spacing
24 Station Presets (18
FM 16 AM)
Auto Stereo IMono
Auto Store
Satellite Radio Ready
Requires XM CNP2000UC and CNPJEN1 (Both Sold
Separately)
Satellite Channel Name, Artist, Song and Categories
displayed on TFT Screen
iPod
High Speed Direct Connect Interface to Access iPod
Playli'sts, Artists, Albums and Songs. Play music and
view video files from your iPod.
Power Management Charges All iPods While
Connected ULink3Included).
Chassis
1.0 DIN (Import IISO-DIN Mountable)
Motorized Flip-Out IFlip-Up LCD Screen
8Character ISegment Type Secondary LCD Display
7" TFT Active Matrix LCD wI Anti-Glare Coating
336,960 Sub Pixels (1440W X234H)
Pixel Pitch -0.321W X0.370H
Screen Tilt IAngle Adjustment
Heat Management System -Forced AirCooling to keep
the chip sets operating at nominal temperatures
General
Bluetooth Ready (with purchase of BTM10) providing
hands-free profile for safety Iconvenience and A2DP
profile for streaming music from aPDA IPMP
44-Key Infrared Remote Control
Two Composite Video Outputs for Additional Screens
Front panel 3.5mm Auxiliary Input for Game Console,
Camcorder, etc.
Rear AudioNideo Auxiliary Input
Navigation Ready (NAV102)
Three-Band Tone control (Bass, Mid and Treble)
wI
Eight Preset EO Curves
Front, Rear and Subwoofer Line Output
Subwoofer Phase Control - 0 - 180 degrees
Programmable Volume Control
Rear Camera Input (Normal and Mirror Image View)
Touch Screen Calibration Mode
100-0hm Preamp Line Output-All Audio Channels
2VRMS Line Output -All Channels
Rotary Encoder Audio Control
SWC Interface -Compatible with PAC adapter SWI-PS
Steering Wheel Control Interface, sold separately
Optional Equipment
NAV102
The VM9313
is "navigation ready." Before accessing
any navigation features, you must purchase and install
the NAV102 navigation module. All installation and
operating instructions will be included with the
naVigation module.
Once the NAV102 is connected and operating properly,
the NAV source mode will become active. While the
navigation module is not installed, the NAVoption
appears gray, indicating the function is not available.
BTM10
Before you can connect to aBluetooth enabled device,
you must purchase and install the Jensen BTM10.
Bluetooth Phone
See "Bluetooth Operation" on page 25.
Rear Camera
The VM9313 is "camera ready." Before accessing any
camera features, you must purchase and install arear
video camera. Once the rear camera is connected and
operating properly, the CAMERA source mode will
1
become active. While the camera is not installed, the
CAMERA option appears gray, indicating the function
is
not available.
Satellite Radio Tuner
See "Satellite Radio Operation" on page 15.
iPod
See "MP3IWMA Operation" on page 21.
WARNING! To reduce the risk of atraffic accident
(except when using for rear view video camera) never
use the video display function while driving the vehicle.
This
is aviolation of federal law.
WARNING! Neverdisassemble
or adjust the unit.
WARNING!
To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Neveruse
irregular discs.
WARNING!
To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING! Using an
improper fuse may cause damage
to the unit and result in afire.
WARNING! The
monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do
not push, pull or swivel the monitor manually.
*HD RadioTM Technology Manufactured Under License From
iBiquity Digital Corporation. U.S. and Foreign Patents.
HD
Radio™ and the HD and HD Radio logos are proprietary
trademarks
of iBiquity Digital Corporation.

VM9313 <1f:S~
11 10
14
---------tt----t-------j 15
······1···
WIlE TILT
7
Multimedia Receiver
96
CLOSE PIC
(PP .
I (C OPEN ¢BAND
.....
12
,----
~
160
>WI
<[ENSE[)
~ f~I/lumR
WAn5
$.
13
8lltSP IVM9313 I
\J}:':::' ®
5
~
<!>
H?}Radio'
."..
\)~
II ~ ...., J·EIluw·m mw IW ~ II
I~I
SRC
~..; I!J1I!J1 m'fJIIIlfIJ!iI'lJ1FjJ fIJ!iI I =TA !P ~ ...
CONTROLS AND INDICATORS
Button Operation
1. TlLT/»1
With the TFT screen open, press to activate the tilt function.
Turn the AUDIO control (5) to make adjustments while the
red tilt icon is flashing.
With the TFT screen closed:
DVD Mode: Press once to enter the next chapter or
track.
TUNER Mode: Press once to auto-search the next
available radio station.
MENU Mode: Press once to move the cursor to the
right.
2. WIDE/I«
With the TFT screen open, press to adjust the display aspect
of the picture to one of two settings: Full or Normal.
With the TFT screen closed:
DVD Mode: Press once to play back the previous
chapterl track.
TUNER Mode: Press once to auto-search for the
previous available radio station.
MENU Mode: Press once to move the cursor to the left.
When the NAV102 is connected to the VM9313, press and
holdto display the navigation user interface. The TFT screen
must be open for this function to operate.
3. PIC/BAND
With the monitor open, press to adjust the Brightness and
Contrast. Press the AUDIO button (5) to move between
Brightness to Contrast. Turn the AUDIO control (5) to adjust
the setting for the selected option.
With the monitor closed, press the BAND button to change
the AM, FM or SAT band.
4. CLOSE/OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT ..
5. AUDIO ROTARYENCODER
Rotate to adjust the volume.
Press and hold to access audio menu. While in menu, press
repeatedly to view audio settings.
Press to mute audio. Press again to resume previous
volume.
2

~ VM9313
CONTROLS AND INDICATORS
6. <!>ISRC
Press to turn the unit on. Press and holdto turn off.
Press to select playing mode.
7. LCD Display
8. DISP
Press to cycle through information available on the LCD
screen.
. ...
...................................................... j.CP
(..::=(O=PE=N= Q=BA=N=D=4 Q-=J=ENst:N=~:::::9> +(==I ... =I ... =C?=~=i~=I~~
NOTE: The VM9313 features Softmute, which will allow
the volume to increase gradually when the MUTE
function is deactivated.
CLOSE
PIC
Multimedia Receiver
WIDE TILT
8 I-I---+--+<>
9. IR Remote Control Receiver
10. USB Connector
Insert compatible USB device for playback of multimedia files
through the head unit.
11. 3.5mm AIV INPUT Connector
Connect an auxiliary AudioNideo device for playback of
multimedia files through the head unit.
12. RESET
Press to reset system settings to factory default (except the
password and parental lock setting).
13. Disc Slot
14. A
Press once for disc insertion/ejection.
Press and hold to reset core mechanism position.
15. LCD Display
------+1-+-------115
~ 1~3 I
'- J) :.:;:.( ~ <!It-+--,
))
~=================~ "...
51-1----++-\ .-+\+ \ SRC<!> ('Tr=~~~~~~~~~~11 ~Radio' I~ J
~ ~ ( 1~~~BlII:IUf1:m~=~.: II ~... ~
@
3
69 7 14 10
11

VM9313 ~
REMOTE CONTROL
o
CD
-1+--+-{29
o
~----ft--/---{34
NOTE: Your remote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.
4

~ VM9313
Table 1: Remote Control Functions
Button Function
Name Ref# DVD VCD TUNER CD/MP3/USB SATELLITE iPod
MENU 1Enters the main menu
of the Tums on/off PBC when play- Displays diagnostics screen Selects Photo mode
disc
ingVCD
TITLE 2Enters the title menu of the Plays first ten seconds of
Selects Music mode
disc each chapter/title
MUTE 3Toggles on/offaudio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output
POWER/<!> 4Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off
AUDIO 5Changes the audio language Selects Music mode
for disc playback
REPT A-B 6Setup to repeat playback from Setup to repeat playback from
time frame Ato time frame Btime frame Ato time frame B
REPT 7Repeats playback
of current Repeats playback of current Repeats playback
of current Repeats playback of current
chapter chapter track track
SRC 8Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode
SUBTITLE 9Language selection for subti- Selects Photo mode
tie
DISP/
10 Displays playing information Displays playing information Displays playing information Display playing information Delete entry
or move back- Displays playing information
CLEAR wards to correct error
in Direct
Delete entry or move back- Delete entry or move back- Delete entry or move back- Delete entry or move back- Access mode Delete entry or move back-
wards to correct error
in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error
in Direct
Access mode Access mode Access mode Access mode Access mode
PRESET.
11 Navigates the preset station
list
PRESETT
12
Navigates the preset station
list
ANGLE
13
Plays back disc in different Plays back Picture CD with Selects Video mode
angle for ascene different angle
of picture dis-
played
~~
14 Fast forwards the disc content Fast forwards the disc content Fast forwards the disc content Accesses iPod Menu
VOL-
15
Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume
VOL +
16 Increases volume Increases volume Increases volume Increases volume Increases volume Increases volume
~
17 Selects the previous chapter Selects the previous chapter Searches an available radio Selects the previous track for Searches
an available radio Pauses playback/starts play-
for playback for playback station by decreasing tuning playback station by decreasing tuning back
frequency frequency
~/II
18
Pauses playback/starts play- Pauses playback/starts play- Pauses playback/starts play- Toggles the on-screen menu
back back back between CAT/CH mode
~
19 Selects the next chapter for Selects the next chapter for Searches
an available radio Selects the next track for play- Searches an available radio Selects the next track for play-
playback playback station by increasing tuning back station by increasing tuning back
frequency frequency
./~
20 Stops playback Stops playback Stops playback
GOTO
21 Open direct entry search Open direct entry search
screen screen
...
22 Slow playback/slow rewind Slow playback/slow rewind
playback playback
5

VM9313 ~~
Table 1: Remote Control Functions
Button Function
Name Ref# DVD VCD TUNER CD/MP3/USB SATELLITE iPod
ZOOM 23 Zooms in/out on an image Zooms in/out on an image
PIC 24 Displays set-up parameters Displays set-up parameters
OPEN/ 25 Opens/closes the TFT moni- Opens/closes the TFT mani- Opens/closes the TFT moni- Opens/closes the TFT mani- Opens/closes the TFT monitor Opens/Closes the TFT monitor
CLOSE tor tor tor tor
~
26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitortilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle
~
27 Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle
WIDE 28 Selects display mode: FULL Selects display mode: FULL
or NORMAL or NORMAL
1,2,3,4,5, 29 Directly accesses chapter 1-6 selects preset for current Directly accesses track 1-6 selects preset for current
6,7,8,9,0 band band
(Numeric
Keypad)
11>/ BAND 30 Press repeatedly for slow Press repeatedly for slow Selects FM/AM band Selects SAT1, SAT2, or SAT3
motion forward/backward motion forward/backward band
SETUP
31
Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu Displays Setup menu
EO 32 Accesses equalizer menu Accesses equalizer menu Accesses equalizer menu Accesses equalizer menu Accesses equalizer menu Accesses equalizer menu
RDM 33 Plays all chapters
in random Plays all tracks in random Plays all tracks
in random
order order order
INT 34 Plays the first ten seconds of
each track
EJECT
35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc
6

<E§0 VM9313
I
Table 2: Video Output Modes
Image Setting
Table 2shows the video output mode for each playing
source.
Aspect Ratio
Press the WIDE button (28) on the remote control or WIDE
button (2) on the monitor to adjust the aspect ratio as follows:
Parking Brake Inhibit
Table 3: Monitor Protective Measures
When the pink "Parking" wire is connected to the vehicle
Parking Brake circuit, the front TFT monitor will display video
when the Parking Brake is engaged. (When the pink wire is
grounded via the Parking Brake circuit, video will be
displayed.)
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following
protective measurements can be executed to prevent
damage to the mechanism
or monitor:
Obstruction Self
OPEN Butlon Power
Protection
Pressed
Reconnected
Monitor Monitor is Monitorfully Monitor is
loading out automati- extended automati-
horizontally cally loaded horizontally cally loaded
into unit into unit
Monitor Unit stops
at Monitorfully Monitor is
loading in obstruction extended 'automati-
horizontally point horizontally cally loaded
into unit
Monitor Unit stops
at
Monitor Monitor swiv-
loading out obstruction swivels back els back to
vertically point to the unit the unit
Monitor Unit stops
at Monitor Monitor swiv-
loading in obstruction swivels back els back to
vertically point to the unit the unit
After the protective procedure is executed, normal operation
is resumed by pressing the OPEN button (4) or disconnecting
and reconnecting the power.
FULL
The entire screen is extended
horizontally to the aspect ratio
of 16 to
9. The extension ratio is the same at
any point.
NORMAL
The conventional display image has a
4to 3ratio
of horizontal to vertical,
leaving ablank area on the right and
left sides
of the display.
F01
~
Playing Source Video Output Modes
AM/FM TUNER RGB Mode
SAT TUNER RGB Mode
iPod RGB Mode
DVD RGB Mode
AUXIN CVBS Mode
·CVBS -Composite Video Baseband Signal
ParameterAdjustmentProcedure
1. Enter Picture Quality Setting Mode:
Press the PIC button (24) on the remote control or the
PICIBAND button (3) on the monitor.
2. Select Item to Set:
Press the AUDIO button (5) on the control panel to
select
"BRIGHr or "CONTRAST".
3. Set Parameters:
Press the
+/- buttons (15, 16) on the remote or tum the
AUDIO control (5) on the control panel.
4.
Exit Picture Quality Setting Mode:
Press the PIC button (24) on the remote control or the
PICIBAND button (3) on the monitor
USING THE TFT MONITOR
Open/Close TFT Monitor
Open TFT Monitor
Press the OPEN button (4) on the front panel or press the
(
.. "\,) button (25) on the remote control to activate the
mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button (4) on the front panel or press the
(
........ )button (25) on the remote control to load the display
panel back into the compartment.
TFT Monitor Auto Open
If"TFT Auto Open" is "on" when the unit is tumed on, the
monitor automatically moves to the viewing position.
If "TFT Auto Open" is "off' when the unit is turned on, press
the OPEN button (4)
or ( .. "\,) button (25) on the remote
control to move the monitor into the viewing position.
If "TFT Auto Open" is set to "Manual", the TFT will not close
when the key is turned off.
Monitor Tilt Angle Adjustment
Aknown characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one ofthe
following methods:
Step by Step Angle Adjustment
Press the ( ~ )or (¥ )button on the remote control to adjust
the tilt angle
of the screen one step at atime.
Continuous Angle Adjustment
Press and holdthe ( ~ ) or (¥ )button on the remote control
to adjust the tilt angle in acontinuous motion.
7

VM9313 @~
FAD-BAL
EQ IUser
":~mm o~~~r~~
14 ill lID []I] .14-lill ~
EJEJEJ EJ
BASS MID THEB SUB
IUser I
8. •• Select
9. Band
•• Ifadditional steering wheel control buttons are available on
the vehicle, function 718may be assigned the "Select"
feature. This feature 1function may not be available on some
vehicles.
Select Operation
If "Select" (function 7or 8) is held down and function 4 is
pressed momentarily, Preset Up will be selected. If "Select"
(function 7or 8) is held down and function 5is pressed
momentarily, Preset Down will be selected.
Audio Control Menu
The Audio Control feature allows you to easily adjust your
audio system to meet the acoustical characteristics
of your
vehicle, which vary depending on the type
of vehicle and its
measurements. Proper setting
of the Fader and Balance
boosts the effects
of the cabin equalizer.
Press the AUDIO button (5) on the front panel or touch the
EQ button on the left side
of the TFT screen to display the
audio menu.
To adjust an audio feature:
1. Use the touchscreen or press the (»1)/(1«) buttons (14,
22) on the remote control to highlight the audio feature
to
be adjusted.
2. Touch the screen to select an option to adjust. Touch
the yellow box next to the "EO" label or press the
AUDIO control (5) repeatedly
to view available preset
EO options.
3. Touch the +1- buttons on the screen or press the 1«,
»1. », or« buttons (17, 19, 14,22) on the remote
auxiliary device connected to the
AN INPUT on the front of
the radio. You cannot directly control external devices
connected to the
AN INPUT.
Selecting aSource While Navigating
While navigating, other sources maybe selected and listened
to such as AM-FM Tuner, CD, etc.
To select asource, press
the
<!> ISRC button (6) and then select asource from the
Front Source Menu. Navigation voice prompts will be heard
automatically, although the navigation map cannot be seen.
(The selected source audio will be muted until the navigation
voice prompt command is completed, after which the source
audio will resume.)
Volume Adjustment
To increase or decrease the volume level, turn the AUDIO
control (5) on the front panel or press the
VOL+I VOL-
buttons (15, 16) on remote control. When the volume level
reaches "0" or "40", abeep sounds, indicating that the
adjustment limit has been reached. The volume ranges from
"0" to "40". The LCD
or TFT screen displays the volume level
for 3seconds.
Programmable Tum-On Volume
This feature allows the userto select aturn-on volume setting
regardless
of the volume setting prior to turning the unit off.
To program aspecific turn-on volume level, turn the AUDIO
control (5) to adjustthe volume to the desired turn-on volume.
Press and hold the AUDIO button while the yellow speaker
icon and level indication is displayed on the screen. The unit
will beep to confirm your turn-on volume setting.
Steering Wheel Control (SWC)
The VM9313 is compatible with the PAC (Pacific Accessory
Corporation) steering wheel control adapter SWI-PS. A
3.5mm female connector (labeled "SWC Interface") on the
back
of the head unit allows connectivity to the PAC adapter.
Please refer to the instructions included with the PAC adapter
for detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1. Vol Down
2. Vol Up
3. Mute
4. Seek Down 1Previous Track 1•• Preset Down
5. Seek Up 1NextTrack I•• Preset Up
6. SRC (Source)
7. •• Select
~
<DRlghtAudIO
Ir§
IZ>LoftAudlO
r:::~Ground
11r=~V1-
~
3.5mm Media Cable (Included)
OPERATING INSTRUCTIONS
Power On / Off
Press the <!>/SRC button (6) on the unit (or the <!> button (4)
on the remote control) to turn the unit on. The buttons on the
front
of the unit light up and the current mode status appears
in the LCD screen (15). You can also turn on the unit by
pressing the OPEN button (4) and opening the TFT screen.
Press andhold the
<!> button to power offthe unit.The monitor
is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.
Mute
Press the AUDIO button (5) on the front panel or the MUTE
button (3) on the remote to mute the volume from the unit.
Press the button again to restore the volume. "MUTE" is
displayed on the LCD. Adjusting the volume or using any
of
the audio setup features cancels the mute function.
Playing Source Selection
Press the SRC button (6) on the front panel or the SRC
button (8) on the remote to change between available playing
sources. The playing mode is displayed on the TFT and LCD
screens.
Accessing External Devices
External peripheral devices can be connected to this unit via
the rear RCA inputs or the
AN INPUT connector (11) on the
front
of the unit. Select "AUX-IN1" to access an auxiliary
device connected to the
AN INPUTon the front panel. Select
"AUXIN2" mode to access adevice connected to the rear
AUX
IN connectors.
======J~ ~
Connect the external device to the 3.5mm Media Cable and
then plug the cable into the
AN INPUT connector (10) on the
front
ofthe radio. Select "AUXIN1" mode to access an
8

~ VM9313
control to adjust the selected feature to the desired
setting.
Table 4:
Audio Adjustments
Audio Function Adjustable Range
II::U User
Acoustic
Urban
Rave
Latin
Dance
Hip Hop
Rock
BASS -14 to +14
MID -14 to +14
TREB -14 to +14
SUB -14 to 0
BAL-FAD
Grid
NOTE: The EQ mode will automaticallychange to
"USER" when individualaudio functions are adjusted.
The Audio menu will automatically exit after afew seconds of
inactivity. To exit quickly, touch the top left corner of the
screen
or press and hold the AUDIO button (5).
System Reset
To correct asystem halt or other illegal ~ [RESET] Button
operation, use the tip
of apen to press ~
the reset button (12) located on the
front bottom-right corner
of the unit. After asystem reset, the
unit restores all factory default settings.
NOTE: If the unit is reset while aDVD is playing, the DVD
resumes
play once the reset is complete.
Line Mute
If the "MUTE" wire is connected, audio output mutes when a
telephone call is received by the car phone. .
9

VM9313 <TI~sB>
SETUP MENU
DIRECTION BUTTONS
To access system settings, press the SETUP button (31) on
the remote control or touch the ~ button on the screen to
enter the "SETUP" menu. The "GENERAL" sub-menu
appears highlighted in blue.
Setting
Options
Function
OSD English
On Screen Display appears in
English.
DVDAudio
English
DVD Audio is heard in English
when the option is available.
DVD Subti- English DVD subtitles automatically
tie appear in English
when avail-
able.
Auto
DVD subtitles appear accord-
ing
to the default subtitle lan-
guage specified on the disc.
Off
DVD subtitles do not appear
automatically.
Disc Menu English DVD menu (if applicable) is
displayed in English.
Audio Sub-menu Features
Setting Options Function
DRC
Off
Employ the Dynamic Range
On Control
for better playback for
low volumes.
Subwoofer
Off
Turn the subwoofer on/off.
On
SubW
0Subwoofer output IN phase
Phase
180
Subwoofer output OUT OF
phase
NOTE: Depending on your
installation, reversing the sub-
wooferphase may increase
Bass output.
Sub Filter 80Hz
Selecting acrossover fre-
120Hz
quencysets acut-offfrequency
of the subwoofer's LPF (Iow-
160Hz
pass filter) and the "SMALL"
speakers'
HPF (high-pass fil-
ter). The Crossover frequency
setting has no effect
if the sub-
woofer is set to "OFF" and any
other speaker is set to
"LARGE".
3. Selecta
new value by using the touchscreen or pressing
the» or« buttons (14, 22) on the remote control.
4.
Use the touchscreen or press the >/11 button (18) on the
remote control to confirm setup.
GeneralSub-menu Features
Setting Options Function
Clock 12Hr
Clock displays 12 hour time
Mode using
AM and PM.
24Hr Clock displays 24 hour time up
to 23:59.
Clock (HH:MM) Clock
appears in the top right
corner of the screen and on the
LCD screen during certain
operations.
NOTE: The AMIPM
indication will change as you
continue to
adjust the hour past
12.
Tuner
USA
FM Band: 87.9MHz-
Region 107.9MHz, channel separation
@200kHz
AM Band: 530kHz -1710kHz,
channel separation @10kHz
Europe FM Band:
87.6MHz-
107.9MHz, channel separation
@
100kHz
AM Band: 531kHz -1602kHz,
channel separation @9kHz
Beep On When turned on,
an audible
beep
tone confirms each func-
tion selection.
Off No beep sounds.
Language Sub-menu Features
If a DVD supports more than 1Subtitle or Audio language, all
the languages
are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
BACK
~12:27AM
SETUP
Bluetooth
'"
Rating
Clock Mode I12Hr I
Hardware
Clock I
04: 31 AM I
P.YOL
I I
Tuner Region USA
TSCal
II
Beep On
Demo
Accessing Menu Items
Touch the sub-menu name or press the «, »,1«, or »1
direction buttons (22,14,17,19) on the remote control to
select asub-menu (Language, Audio, Rating, etc.).
The features available for adjustment underthe highlighted
sub-menu option will
appear in the center of the screen.
Adjusting a Feature
1. Use the touchscreen or press the 1« or »1 buttons (17,
19) on the remote control to select the feature to be
adjusted.
2. Enter the option field
for the feature you want to adjust
by using the touchscreen or pressing the >/11 button (18)
on the remote control. A
submenu appears in asecond
row with the selected option highlighted in blue.
10

~ VM9313
Bluetooth Sub-menu Features
Setting Options Function
Bluetooth Off Disable Bluetooth function.
On Enable Bluetooth function.
Connect Manual Connect the last active mobile
phone by touching the CONNECT
icon when disconnected.
Auto Automatically connect when your
paired phone is in range.
Auto Answer Manual Manually answer calls by touching
the "call" button.
Auto The unit automatically answers all
incoming calls.
Pairing Code The default code is "1234". Touch
the keypad icon to open the keypad
and enter the pairing code or pass
key required for Bluetooth connec-
tion to your mobile phone. Notall
phones/devices require apairing
code. The default code is "0000" for
many models.
Rating Sub-menu Features
The DVD system has abuilt-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is
available for setup.
Setting Options Function
Password
----
Enter a4-digit password to
activate the "Rating" feature.
Rating 1. Kid Safe Select the appropriate rating
2. Glevel for the intended audience.
3.PG
You may override higher rat-
4. PG-13 ings by
usinQ your password.
5. PG-R
6.R
7. NC-17
8. Adult
Load Fac- Reset Select "Reset" to restore the
tory factory default settings for the
Rating system only.
To reset the password, access the "RATING" menu and enter
the current password. Once the correct password is entered,
you can access the "Password" field and enter anew one.
NOTE: Record the password and keep it in asafe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. "the rating
is not available on the disc, the parental lock feature is
unavailable. Somediscs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the
disc description.
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and
the TFT monitor is retracted inside the unit, the TFT monitor
automatically moves into the viewing position and Camera
mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back
inside unit.
Setting Options Function
Camera In Normal
Mirror Reverse the camera image as
if looking through arear-view
mirror.
TFT Auto On The TFT panel automatically
Open opens when the unit is turned
on.
Off
You must press the OPEN but-
ton (1) to open the TFT panel.
Manual When the ignition is turned
OFF, the TFT panel DOES
NOT retract
if it was previously
out
Video Input NTSC The color signals are output in
(Input cir- the standard
~TSC format.
cuitry auto- PAL The color signals are output in
detects the
video sig- the standard PAL format.
nal from the Auto The color signal output is
Aux
In
switched automatically based
source). on the current video input sig-
nal -NTSC
or PAL.
Ifthe monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.
11
P. VOL Sub-menu Features
Setting Options Function
Source Radio Choose asource for which you
Disc would like to increase the rela-
tive volume (LEVEL).
USB
AUXIN1
AUXIN2
SAT
iPod
NAVI
Level 0-6 Increase relative volume for
specified source up to 6decib-
bels.

VM9313 ~
TS Cal (Screen Calibration)
To access the "Screen Calibration" function from the SETUP
menu, select the "TS CAL" option.
After entering calibration mode, acrosshair +appears in a
corner quadrant of the screen. To begin calibration, press
and hold the crosshair for one second until it moves to the
next quadrant. Continue for each quadrant until the
calibration is completed.
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto
Run on/off by choosing the "Demo" option from the SETUP
MENU.
When "Demo Auto Run" is Off, you can select "Demo Mode>
Run" to start Demo Mode. Demo Mode scrolls through the
various source screens, simulating activity on the display.
"Demo Mode" is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop Demo
Mode, press the upper-left quadrant of the TFT (Source
select).
When "Demo Auto Run" is On, the unit will automatically
display Demo Mode when powered on.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the
SETUP button (31) on the remote control or touch the BACK
button on the screen.
12

~ VM9313
TUNER OPERATION
About HD Radio™ Technology
HD Radio technology allows CD-quality digital broadcasting
ofyour local AM and
FM radio stations. HD Radio broadcasts
can include multiple channels
on the same frequency, which
is called multicasting. With multicasting, you can receive up
to eight additional multicast channels: HD1-HD8. With your
VM9313 radio, you will receive HD Radio digital broadcasts
automatically when tuned
to astation that offers HD Radio
technology.
Tuner TFT Display
Ilpl
87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1
MHz
P5 107.9 MHz
P6 102.9 MHz
Info: Soft Rock & 011 of Yesterday
6
9
11}--f--iJIi<~(
1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Radio station name (call letters)
5. Tuning mode indicator
6. Preset radio stations: Touch to recall preset stations
7. Program Information: Title, Artist, Type
NOTE: The amount of information displayed when
receiving an
HD Radio signalis dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist'sname, song tit/e, andcategory
of music.
8. Touch for quick access to Equalizer level settings
9. Touch to access the direct entry screen
10. HD Radio band indicator
11. 1«: Touch to seek backward
12. »1: Touch to seek forward
13. «: Touch to tune backward one step, including
multicast channels
14. »: Touch to tune forward one step, including multicast
channels .
15. BAND: Touch to change between AM/FM bands
16. Touch to view the SOURCE MENU and select anew
playback source
17. MEM: View screen used to enter current channel into
preset memory
18. 1/2 or"2/2: Touch this page button to view asecond
page of on-screen buttons.
NOTE: In AM mode, there is onlyonepage of on-screen
button options. The PROG button is not visible since
Multicast channels are
not available for AM stations.
19. ~: Touch to view the SETUP menu
20. PROG: Touch to view the HD Radio Multicast channel
display
21. AID: Touch to select Auto, Analog or Digital tuning
mode.
22. HD Radio Signal Indicator
Switching to HD Radio Reception
Touch the top left corner of the screen (the circle) to
view the SOURCE MENU. Touch "Radio".
Press the SRC button (6) on the front panel or remote
control (8) to switch to the AM/FM or RADIO source.
Selecting the AM/FM Band
Touch the BAND button (15) on the screen, or press the
BAND button on the unit (3) or remote control (30)
to select
the
AM or FM band.
13
NOTE: The BAND button on the unit only works when the
TFT is closed.
Selecting a Tuning Mode
Touch the AID button (21) to choose from the following
modes:
Auto: Search for both digital and analog stations.
Analog: Search and broadcast only analog channels.
Digital: Search and broadcast only digital stations.
Tuning
Not all FM or AM stations offer HD Radio (digital)
broadcasting.
You can receive both analog and digital
stations with the VM9313.
NOTE: In order to receive HD multicast channels, you
must be in Auto or DigitafTuning Mode and the HD icon
(22) must be illuminated.
Seek Tuning
To seek the next station:
Touch the
»1 button on screen (12).
Press the
»1 button (19) on remote control.
To seek the previous station:
Touch the
1« button on screen (11).
Press the
1« button (17) on the remote control.
Manual Tuning
To increase ordecrease the tuning frequency one step:
Touch the
tor' buttons on screen (14,13).
Press
the» or« buttons (14, 22) on the remote
control.

VM9313 <E~s6>
NOTE: The amount of Information displayedwhen
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their
call
letters (name), the artist's name, song title, and category
of music.
PTY Search
After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
§87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
IPreset: I
OJ00D
GJ00D
0000
01 Clear 10
2. Touch the on-screen MEM button (17) to open the
preset screen.
3. Enter the preset numberfor which you would like to
store the current station (or press EXIT to cancel and
close the menu). The preset numberand station
appears highlighted on the left side of the screen.
NOTE: Multicaststations can be stored as preset
stations.
RecallingaStation
1. Select aband (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
Auto Store (AS)
To select 18 strong FM or 6AM stations and store them in
the current band:
1. Select aband (ifneeded).
2. Press and hold the PICIBAND button (3) on the control
panel for 2seconds to activate the Auto Store function.
The new stations replace stations already stored in that band.
02:07 AM
Ttlil
Auto oHD
Non-speciflc
02 News
03 Information
04 Sports
05 Talk
06 Rock
(Info: DAWSON McALLIST
Ifthe PTY menu is not displayed, press the PROG button
(20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
When aPTY category is selected from .the touch screen
menu, the radio will start scanning for stations broadcasting
in the selected category.
Using Preset Stations
You can store up to 18 presets for FM and 6presets for AM.
Stored stations appear on the left side of the screen.
Storing aStation
1. Select aband (if needed), then select astation.
18:
FM 106.7 MHz
T,III
~02:27AM
WXXL-FM
Auto OHD
:
~
HD-1
HD-2 @
HD-3
(Info:
Lil Love )
(f!:OG$ ~212 ~ V
Direct Tuning
To enter aradio station directly, touch the ~ button or
press the GOTO button (21) on the remote control to display
the direct entry menu.
!FM: MHz I
OJ00D
GJ00D
0000
01 Clear 10
Enter the desired radio station using the on-screen number
pad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2. Ifa
Multicast channel is being broadcast forthe current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
14

<[~S£S:> VM9313
SATELLITE RADIO OPERATION
Listeners can subscribe to X~ Radio on the Web by
visiting www.xmradio.com. or by calling [phone].
Customers should have theirRadio 10 ready (see
"DisplayingtheIdentification (10) Code'? Customers can
receive alimitednumber
of free-to-air channels without
activation.
Accessing Satellite Radio Mode
Press the SRC button (6) on the front panel or remote control
(8) to switch to the SAT source.
1. SAT channel name
2. SAT channel number
3. SAT band
4. Time
5. Song title
6. Artist
name
7. Song category
8. Signal Strength Indicator
9. Current preset channels/on-screen preset buttons
10. CH
-: Select the previous channel
11. CH +: Select the next channel
12.
CAT +: Select next channel in current category only
13. CAT -: Select previous channel in current category only
14. Touch to enter channel directly using keypad on screen
15. CG: Access Channel/Category Guide mode
16. BAND: Change between SAT1, SAT2 and SAT3 bands
17.
~: Touch to view the SETUP menu
18. Touch this area to view the SOURCE MENU and select
anew playback source
19. MEM: View screen used to entercurrent channel into
preset memory
Displaying the Identification (ID)
Code
Before you listen to satellite radio, you must subscribe to the
service using your radio's identification number.
To display
the radio ID, press CH -
or CH +buttons on the touch screen
repeatedly to tune to channel
'000'. The screen displays the
radio ID where the channel name is usually displayed.
Selecting a Station
Press the 1« or »1 buttons (17, 19) on remote control or the
CH -
or CH +buttons on the touch screen to change to
another station.
Preset Mode
To enterpreset mode, touch the BAND button on the screen,
or press the BAND button on the unit (3) or remote control
(30) to change between the following bands: SAT1, SAT2,
or
SAT3 (indicated in the top left comer of the TFT screen).
Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6)
for the current
band appear on the
TFT screen.
Storing aStation
1. Select aband (if needed), then select astation.
2. Touch the on-screen
MEM button (18) to open the
preset screen.
ICH### I
~§J@J
P4§J~
[
Ex itI
3. Touch the preset number in which you would like to
store the current station (or press
EXIT to cancel and
close the menu). The preset number and station
appears highlighted.
Recalling aStation
1. Select aband (if needed).
15
2. Touch an on-screen preset button to select the
corresponding stored station.
Direct Tuning
To enter aradio station directly, touch the 88888 button or
press the GOTO button (21) on the remote control to display
the direct entry menu.
ICH: /255 I
UJ00Q
GJ00D
0000
01 Clear 10
Enter the desired radio station using the on-screen' number
pad. Press the enter button (arrow) to tune to the selected
station.
To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.
Channel/Category Guide Mode
There are two search modes to help navigate through
channels and
or categories. To accessthe Channel/Category
Guide mode press, the ZOOM button (23) on the remote
control
or the CG button on the touch screen.
Channel Guide is the default search mode.
To access
Category Guide, press the TITLE button (2) on the remote
control
or touch CAT on the touch screen. To return to
Channel Guide, touch CH on the screen
or press the
SUBTITLE button (9) on the remote control.
Channel Guide Mode
When Channel Guide mode is selected, the first six satellite
channels are displayed in the boxes in the bottom left
of the
TFT screen and the on-screen menu changes to facilitate
search mode.

VM9313 ~siS>
SAT1 CHOO1 'foil II
XM Preview Preview
l'J 004 The 400
l'J 005TheSOs
l'J 00Ci The 60s
l'J
007Th.700
(Title: www.xmradlo.com
01:02
While in Search Mode, to switch between Channel and
Category search modes, press the CH
or CAT buttons
in the touch screen.
Use the scroll bar and arrows on the touch screen to
view the neXUprevious page
of stations. Each page
contains six channels to select from.
Press the on-screen SCN button
to preview each of the
6channels displayed for 10 seconds.
Press the CG button to return
to the Preset Mode
screen.
To select achannel while in Channel Guide mode, touch
the channel name on the screen. The channel will begin
playing and the unit will return to the Preset Mode.
Category Guide Mode
When Category Mode is selected, folder icons appear on the
screen next to category choices.
While
in Search Mode, to switch between Channel and
Category search modes, press the CH
or CAT buttons
in the touch screen.
Use the scroll bar and arrows on the touch screen to
view the neXUprevious page
of categories. Each page
contains six categories to select from.
To select acategory, touch the corresponding category
name or folder icon. The channels in that category will
be displayed on the screen.
Use the scroll bar and arrows on the touch screen
to
view the nexUprevious six stations in the selected
category.
Touch the on-screen SCN button to preview each
channel
in the selected category for 10 seconds.
Touch the channel name to play that channel.
Touch the on-screen CG button to return to the Preset
Mode screen.
16

~ VM9313
NOTE: For VCD play, the repeat function is not available
ifPBC is on.
SlowMotion Playback
Press the «button (22) on the remote control or the «
button on the screen to play the current title in slow motion.
Keep pressing and releasing the button to increase
the rate
from "2X"
to "4X", "8X", and "20X".
Press
>/11 (18) on the remote control or touch the onscreen
play button
(» to resume normal play.
Fast Forward Playback
Press the» button (14) on the remote control or the»
button on the screen to fast forward. Keep pressing and
releasing
the button to increase the rate from "2X" to "4X",
"8X", and "20X".
Press
>111 (18) on the remote control or touch the onscreen
play button
(» to resume normal play.
RepeatPlayback
Press the RPT button (7) on the remote control or the ~
button on screen to alter repeat mode according to the
following:
DVD: Repeat Chapter, Repeat Title, Repeat
Off
VCD (PBC Off): Repeat Single, Repeat Off
A
A - Displays playing information
B - Displays on-screen control menu
........................................ __ .
B
Controlling Playback
To access the on-screen controls, touch the bottom 1/3 of the
screen (section B). Touch the 1/2 button to
view asecond
page
of controls
DVDIVCD VIDEO OPERATION
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
NOTE: When properly installed, DVD video cannotbe
displayed on the main TFT screen unless the parking
brake
is applied. If you attempt to playa DVD while the
vehicle
is moving, the TFT screen displays "PARKING"
with ablue background. Rearvideo screens,
if
applicable, will operate normally.
NOTE:
If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
enteredand/orthe
disc must beauthorized(see "General
Sub-menu Features" on page 10).
Opening/Closing the TFT Video Screen
Opening the TFTScreen
To open the TFT video screen, press the OPEN button (4).
The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN button (4) again to close the TFT screen. If
the screen is in the "IN" position, it
moves out before closing.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc
play begins.
Stopping Playback
Touch the stop button (_) on the screen or press the _
button (20) on the remote control to
stop DVD play.
Pausing Playback
Touch the play/pause button (» on the screen or press the
>/11 button on the remote control (18) to suspend or resume
disc play.
You cannot insert adisc ifthere is already adisc
in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized
and the DVD is closed.
Ejecting aDisc
Press the ~button (14) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You
may eject adisc with the unit powered off. The unit will
remain
off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold
the ~button (14) on the
unit
or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when adisc is already inserted,
press the SRC button (6) on the front panel
or remote control
(8) until "DISC" appears
at the bottom of the screen.
I ~ I~IBACKI
o
EJ0B
o
G~IBACKI
[AUDIOI
I SUBTITlE I
I TITLE 1I~2/21B
Sectional RepeatFunction (A-B)
Use the A-B function to define aspecific area of adisc to
repeat.
Press the
RPT A-B button (6) on theremote control (or
the A-B button on screen) to set the start point (A) of the
repeated section.
Press
the RPT A-B button again once you reach the
desired end point (B)
of the repeated section. The
selected portion of the DVD will now repeat
continuously.
Press
the RPT A-B button again to cancel the A-B
section setting and stop repeat play.
Random Playback
With aDVD, VCD, or CD playing, press the ROM button (33)
on the remote control
to activate random playback and play
all chapters/tracks
in random order. "On" appears on the
screen.
Press the »1 button (19) on the remote control to play the
next random track.
Press the ROM button again
to turn random playoff.
17

VM9313 <TI~~3>
NOTE: When a VCD is playing with PBC tumed "On",
activating random playback automatically tums PBC off.
Goto Search
During DVD or VCD playback, perform the following steps to
use the GOTO feature to access aspecific location on adisc:
1. Press the GOTO button (21) on remote control to enter
"GO TO" mode.
2. Press the» or« buttons (14, 22) on the remote
control to select acategory (highlighted in blue).
For DVD mode, you can choose Time or Title/
Chapter search.
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the «, »,1«, or »1 direction buttons
(22,14,17,'19) on the remote control to select atitle from the
menu or touch the title on screen.
Press the TITLE button (2) on the remote control or on
screen to select adifferent title for playback.
Press the >111 button (18) on the remote control to confirm
your selection. and begin playback. You can also select atitle
using the touch screen.
Moving Through Chapters
Press the »1 button (19) on the remote control or the »1
button on screen to advance to the next chapter on the DVD.
Press the 1« button (17) on the remote control or the 1«
button on screen to move to the previous chapter.
For VCD mode, press the GOTO button to choose
between Track Search, Disc Search and Exit.
PBC (Play Back Control -VCD Only)
For VCDs with play back functionality, play back control
(PBC) provides additional controls for VCD playback.
Press the MENU button (1) on the remote control to toggle
the PBC function "On"rOff'. Once PBC is on, playback starts
from track one of the play list.
Multi-Language Discs (DVD Only)
Changing Audio Language
Ifyou are watching adisc recorded in multiple languages,
press the AUDIO button (5) on the remote control to choose
alanguage.
Changing Subtitle Language
If you are watching adiscrecorded in multiple languages with
subtitles, press the SUBTITLE button (9) on the remote
control to choose the language in which you would like the
subtitles to appear.
NOTE: During VCD playback, press theAUDIO button (5)
on the remote control to choose between Left Channel,
Right Channel,
and Stereo.
NOTE: When PBC Is activated, fast forward,
slow
playback, and previous/nexttrack are. available. Repeat
and direct track selection are not available.
When PBC is activated, selecting random, scan, or search
playback automatically deactivates PBC.
000
0W
0
0000
3. Enteratime into the field using the numeric keypad (29)
on the remote control.
4. Press the >/11 button (18) on the remote control to go to
the specified location on the disc.
5. Press the GOTO button again to exit.
Direct Chapter / Track Selection
Remote Control Direct Entry
During DVD, VCD and CD
playback, you can use the numeric
keypad on the remote control (29)
to access atrack directly.
Touch Screen Direct Entry
To select achapterltrack directly,
touch the I]ffiID button on screen control to display the direct
entry menu.
IChapter: ~
[I]00Q
~00D
0000
01 Clear ,0
Enter the desired chapter/track using the on-screen number
pad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch
Exit. To clear your entry and start over, touch Clear.
Viewing an Alternate Picture Angle
(DVD Only)
Some DVDs contain scenes that have been shot
simUltaneously from different angles. Fordiscs recorded with
multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.
Zooming
Press the ZOOM button (23) on the remote control to enlarge
and pan through the video image using the following options:
"01", "02", "03", "04" and "OFF".
VCD Track Search
Time -Go to specific
time in the current track
DVDSearch
TItle/Chapter -Go to
specific time in a
chapter
TIme -Go to specific
time in current title.
Search
Search
";"'~""'-~""""""''''''.
Title
Chapter
Time
Time
18