Jensen JHD36A User manual

HEAVY
DUTY
JHD36A
AMI
FM/
RBDS/
WB/
USB/
AUX-IN/
BTl
Sirius
XM
Ready/
APP
Ready
Heavy
Duty
Radio
Installation
and
Operation
Manual
~
~-o
G)
,----------.ltDIIA------.
[~~~I

<4,
ifi'Ji
;
JHD36A
HEAVYDUTY
--------------------------------------------------------------------------------------------------------------------
CONTENTS
Introduction............................................................................................................................... 1
Safety Information ....................................................................................................................2
Installation ................................................................................................................................3
Wiring.......................................................................................................................................4
Basic Operation........................................................................................................................5
Tuner Operation........................................................................................................................8
CD/ MP3/ USB Operation .......................................
:
............................................................... 10
SiriusXM Radio Operation .......................................................................................................
11
iPo~
Operation...................................................................................................................... 15
Bluetooth Operation................................................................................................................ 16
APP Operation........................................................................................................................ 17
Care and Maintenance ........................................................................................................... 18
Troubleshooting...................................................................................................................... 18
Specifications ......................................................................................................................... 19
ii

c41Jib,
JHD36A
HEAVYDUTY -----------------------------------------------------------------------------------------------------------------
INTRODUCTION
System Features
Features of Jensen JHD36Amobile audio system include:
Full Dot Matrix LCD
AM/ FM US/ EURO Tuner with 30 Presets (12AM, 18FM)
RBDS (Radio Broadcast Data Service) with PTY Search
Sirius XM Radio Ready
USB Playback of MP3 and WMA files
CD ESP (Electronic Skip Protection) 30 Sec
iPod Ready (USB Interface)
Weatherband Tuner with SAME Technology
Mute
Bluetooth (Supports A2DP, AVRCP, SPP and HFP)
Pre-set
Equalizer- 5 settings (User, Flat, Pop, Classical, Rock)
Electronic Bass, Treble, Balance and Fader Controls
Output Power 45W x 4
Clock 12/ 24 Hour Selectable
Public Announcement (PA) Feature with Optional Microphone
IR Wireless Remote Control Ready (sold separately)
2-Channel Pre-amp Line Level Outputs
2- Wire Power with Non-Volatile Memory and Clock/ Time support
Auxiliary Audio Input (Front 3.5mm Stereo Jack, Rear RCA)
Wired Remote Control Ready(JHDHBC Sold Separately)
APP Ready
Content List
Jensen Heavy Duty Radio
Hardware Kit
Installation Manual
Quick Reference Guide
HARDWARE KIT CONTENTS
FLANGE NUTS
DIN SLEEVE
REMOVAL TOOL
~jP
MOUNTING SCREW
MOUNTING STRAP
MOUNTING

·
.
~
••Kilt
/
JHD36A
HEAVYDUTY
-----------------------------------------------------------------------------------------------------------------
SAFETY
INFORMATION
When
Driving
Keep the volume level low enough to be aware of the road and traffic conditions.
When Washing
Your
Vehicle
Do
not expose the product to water or excessive moisture. Moisture can cause electrical shorts,
fire or other damage.
When
Parked
Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the
interior a chance to cool down before starting playback.
Use the
Proper
Power
Supply
This product is designed to operate with a 12 volt
DC
negative ground battery system.
Protect
the
Disc
Mechanism
Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or
permanent damage due to the precise mechanism of this unit.
CAUTION:
THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT THAT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF
IMPROPERLY DIRECTED.
BE
SURE TO OPERATE THE MOBILE CD PLAYER AS
INSTRUCTED.
USE
OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN
HAZARDOUS RADIATION EXPOSURE.
DO NOTOPEN COVERS AND DO NOTATTEMPT TO REPAIR THE UNIT YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENTTO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
DISC
NOTES
Depending on the recording status, conditions of the disc, and the equipment used for recording,
some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to
the following recommendations:
Use CD-RWs with speed 1
x to 4x and write with speed 1x to 2x.
Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.
Do not play a CD-RW which has been written more than 5 times.
2
Compatible
Disc
Types
Table 1: General
Disc
Information
Disc
Type
Logo
Diameter/
Playback
Time
Playable
Sides
Audio CD
ffiJoo§~
ffi]COMPrn3
rillo§~
12cm single side 74 minutes
OIOITAL
AUDIO
DIGITAL AUDIO
DIGITAL
AUDIO
1·131•1·1•!·!:!111
[REWRITABLEI
NOTE: CD-R
and
CD-RW
discs
will
not
play
unless
the
recording
session
is
closed
and
the CD
is
finalized.
Disc
Maintenance
A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the
disc using a clean cloth, working from the center hole towards the outside edge. Never
use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.
Insert label side up. Do not bend. Never touch the Wipe clean from this
underside of the disc. center to the edge.
Be sure to use only round COs for this unit and do not use any special shape COs. Use of
special shape COs may cause the unit to malfunction.
Do not stick paper ortape on the disc.
Do
not use COs with labels or stickers attached or
that have sticky residue from removed stickers.
Do not expose discs to direct sunlight or heat sources such as hot air-ducts, or leave them
in
a vehicle parked
in
direct sunlight where there can be a considerable rise
in
temperature inside the vehicle.
NOTE: A
disc
may
become
scratched
(although
not
enough
to
make
it
unusable)
depending
on
how
you
handle
it
and
other
conditions
in
the usage
environment.
These
scratches
are
not
an
indication
of
a
problem
with
the player.

r:tJftiD/
JHD36A
HEAVYDUTY -----------------------------------------------------------------------------------------------------------------
INSTALLATION
This unit is designed for installation in vehicle cabs with an existing 1-DIN radio opening. In
many cases, a special installation kit will be required to mount the radio to the dashboard. See
the dealer where the radio was purchased for kit availability. Always check the kit application
before purchasing to make sure the kit works with your vehicle.
Before you Begin
1. Disconnect Battery
Before you begin, always disconnect the battery negative terminal.
2. Remove Transport Screws
Important Notes
Before final installation, test the wiring connections to make sure the unit is connected
properly and the system works.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications to your vehicle.
Install the unit where it does not interfere with driving and cannot injure passengers during
a sudden or emergency stop.
If the installation angle exceeds
30' from horizontal, the unit might not give optimum
performance.
Avoid installing the unit where it will be subjected to high temperatures from direct sunlight,
hot
air, or from a heater, or subject to excessive dust, dirt or vibration.
DIN Front Mount
1.
2.
3.
Slide the mounting sleeve off of the
chassis if it has not already been
removed.
If it is locked into position,
use the removal keys (supplied) to
disengage
it. The removal keys are
depicted in "Removing the Unit"
on
page 3.
Check the dashboard opening size by
sliding the mounting sleeve into
it. If
the opening
is not large enough,
carefully cut or files as necessary until
the sleeve easily slides into the
Dashboard
Bend Tabs
ScrewStud
opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that
there will be sufficient space behind the dashboard for the radio chassis.
Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve.
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs
outward as necessary to firmly secure the sleeve to the dashboard.
3
4.
5.
6.
7.
8.
9.
Place the radio in front of the dashboard opening so the wiring can be brought through the
mounting sleeve.
Follow the wiring diagram carefully and make certain all connections are secure and
insulated with crimp connectors or electrical tape to ensure proper operation.
After completing the
wiring connections, turn
the unit on to confirm
operation (vehicle
accessory switch must be
on). If the unit does not
operate, recheck all
wiring until the problem is
corrected. Once proper
operation is achieved,
turn the accessory switch
off and proceed with final
mounting of the chassis.
Carefully slide the radio
into the mounting sleeve
Dashboard
Support Strap
making sure it is right-side-up until it is fully seated and the spring clips lock it into place.
Attach one end of the perforated support strap (supplied) to the screw stud on the rear of
the chassis using the hex nut provided. Fasten the other end of the dashboard either
above or below the radio using the screw and plain washer provided. Bend the strap, as
necessary, to position
it. Some vehicle installations provide cavity for rear support. In
these applications, place the rubber bushing over the screw stud and insert.
CAUTION: The perforated rear support strap or rear rubber mounting bushing must
be used in the installation
of the radio. Installation without either may result in
damage to the radio or the mounting surface and void the manufacturer's warranty.
Test radio operation by referring to the operating instructions for the unit.
Removing the Unit
FLANGE NUTS
To remove the radio after installation,
remove the plastic end caps, insert the
removal keys straight back until they
click, and then pull the radio out. If
removal keys are inserted at an angle,
they will not lock properly to release the
unit.
Reconnect Battery
When wiring is complete, reconnect the
battery negative terminal.
Removal Key
Key

ct!KiD/
HEAVYD~ ------------------------------------------------------------------------------------------~J~H~D~3~6~A~
85 88
84
A5
15A
FUSE
A4 A1
DETAILA
RED FEMALE
RCA CONNECTOR
WHITE FEMALE
RCA CONNECTOR
81
AB
SHOWN FROM PIN VIEW
PIN NO. DESCRIPTION
A1 RIGHT REAR SPEAKER(+)
A2 RIGHT FRONT SPEAKER(+)
A3 LEFT FRONT SPEAKER(+)
A4 LEFT REAR SPEAKER(+)
AS LEFT REAR SPEAKER(-)
A6 LEFT FRONT SPEAKER(-)
A7 RIGHT FRONT SPEAKER
(-)
AB RIGHT REAR SPEAKER (-)
81 NO CONNECTION
82
NO CONNECTION
83 NO CONNECTION
84
NO CONNECTION
85 GROUND
86 NO CONNECTION
87 +12V ACC SWITCHED
88
NO CONNECTION
SEE DETAIL A--
- BLUETOOTH ANTENNA
WARNING!
Do not connect the +12VDC ACC switched
wire to the battery. This wire MUST be
connected to the Accessory/ Ignition wire
or a +12 volts switched power source.
4
r 10 ·PIN SXI CONNECTOR
4• PIN MICROPHONE CONNECTOR
----------- PA CONNECTOR
BLACK s•
~---FEMALE MOTOROLA TYPE
WHITE FEMALE
RCA CONNECTOR
RED FEMALE
RCA CONNECTOR
ANTENNA CONNECTOR

HEAVY DUTY
BASIC OPERATION
Power On/ Off/ Radio
Press the rotary encoder POWER/AUDIO button (1) to turn the unit on or press and holdto turn
off. The unit will resume at the last mode selected (Tuner, Auxiliary, etc.).
POWER
Volume Control
\
+
To increase the volume, turn the rotary encoder (1) to the right. To decrease the volume, turn the
rotary encoder to the left. While adjusting the volume, the LCD displays a bar graph and
numerical representation of the level.
I,)OLIJME: 25
1
·:· .t::" ...... - ••• t·1
.:...·-'-•H
The maximum volume setting is 40.
5
JHD36A
Mute
Press the MUTE button (24) to mute the audio output. Press MUTE again to restore the audio
output to the previous level.
Mode
Press the MODE button (4) to select a different mode of operation, as indicated on the display
panel. Available modes include the following: Tuner (AMI FM) > SXM (SiriusXM) > iPodl USB >
CD > Auxiliary > BT Audio. Tuner is the default source when a prior source
is no longer
available.
NOTE: CD, iPod, USB or SiriusXM (SXM) mode will be skipped if the device is not
installed.
NOTE:
SiriusXM (SXM) mode will be skipped when the Region menu option is set to
"EURO".
Reset
The reset button should be activated for the following reasons:
• Initial installation of the unit when all wiring is completed
Function buttons do not operate
Error symbol on the display
Use a ball point pen orthin metal object to press the RESET button (23). This may be necessary
should the unit display an error code.
Audio Menu
Press the POWER/AUDIO button (1) to access the audio menu. You can navigate through the
audio menu items by pressing the POWER/AUDIO button repeatedly. Once the desired menu
item appears on the display, adjust that option by turning the rotary encoder (1) within 5 seconds.
The unit will automatically exit the audio menu after five seconds of inactivity. The following
menu items can be adjusted.
Bass Level
Use the rotary encoder (1) to adjust the Bass level range from "-6" to "+6".
Treble Level
Use the rotary encoder (1) to adjust the Treble level range from "-6" to "+6".
Balance
Adjusting Balance controls the relative level between the left and right speakers in each pair.
Use the rotary encoder (1) to adjust the Balance between the left and right speakers from "Left
12" to "Right 12".
Fader
Adjusting Fade controls the relative level between the front and rear speaker pairs. Use the

.,.,,.
,
JHD36A
HEAVYDUTY
------------------------------------------------------------------------------------------------------------------------
rotary encoder (1) to adjust the Fader between the rear and front speakers from "Rear 12" to
"Front 12".
System
Menu
1.
Press and hold the PTY/CAT/MENU button (2) for more than 2 seconds to enter the
system menu. The first menu item, "Key Beep", will appear on the display.
2.
Press the TUNE/SEEK
I<<
I
>>I
(18, 19) button repeatedly to navigate the system menu.
3.
Press the INFO/ENTER button (16) to select the desired item.
4.
Press the INFO/ENTER button again to adjust the selected menu item.
The following items can be adjusted:
Key Beep (On I Off): Turn the audible beep On/ Off (heard when functions/ buttons are
selected).
LCD Backlight
(1-1
0): Adjust LCD brightness.
LCD Contrast (1-10): Adjust LCD contrast.
• Tuning Region (USAI EURO): Set frequency spacing for various regions.
Power-Off Clock (Off, 1-10): Brightness setting of clock when powered off
Clock Format (12Hour I 24Hour): Select 12 or 24 hour display mode.
Set Clock (HH : MM):
Press the INFO/ENTER button (16) to view the clock set screen.
Press the INFO/ENTER button to move to the next digit.
Press the TUNE/SEEK
1<<
I
>>I
(18, 19) buttons to adjust the selected digit.
Rear Aux Enable (On/ Off): Turn
on
to allow the use of auxiliary audio output at the rear of
the radio chassis.
Preset-Only Tuning (On/ Off)
Sirius XM Settings Menu (only appears when Sirius XM tuner is connected and in Sirius
XM mode)
Clock Autoset (On/ Off): Sets clock based on SXM data
Time Zone1 (Atlantic I Eastern I Central I Mountain I Pacific I Alaska)
Daylight Saving Time (Yes/ No)
Set Lock Code:
Locked Channels: List of Channels (Locked I Unlocked)
SXi Firmware Version
Weather Alert Configuration
•
•
Min Alert Level (All I None I Warnings I Watches)
Auto-On Enable (Yes/ No): Select "Enabled" to turn on the radio when NOAAalerts
are issued. This function only works when the
+
12V switched is on.
Alert Volume (Select Volume Level 0-40)
Clear SAME Codes <ENTER>
SAME Code
1:
_____
_
SAME Code 2:
_____
_
SAME Code 3:
_____
_
• SAME Code 4: _
____
_
SAME Code 5:
_____
_
SAME Code 6:
__
_
__
_
6
SAME Code
7:
_____
_
• Battery Alarm (On/ Off)
Battery Auto-Off (On/ Off)
Bluetooth Setup
BT:
(On/ Off)
• BT HFP Volume: (Select Volume Level 0-40) Hands-free call volume
BT Device List <Enter>: View a list of devices paired with the unit
Lock
Connect I Disconnect
Delete
BT Pair <Enterto enable>
BTAuto Answer: (On/ Off)
Reset System Defaults <ENTER>: Press the INFO/ENTER button (16) to return the
EEPROM to factory default set up values.
Equalizer
Press the EQ/LOUD button (11) to choose one of the following pre-defined bass and treble
curves: USER > FLAT > POP > CLASSICAL > ROCK .
EQ:Rock
Loudness
Press and holdthe EQ/LOUD button
(11)
to toggle loudness on/ off. When listening to music at
low volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.
Auxiliary
Input
To
access an auxiliary device:
1.
Connect the portable audio player to the 1/8" AUX IN on the front panel (13)
2. Press the MODE button (4) to select "Auxiliary" mode.
3.
Press MODE again to cancel "Auxiliary" mode and go to the next mode.
PA
Operation
Connect
PA
Microphone (JMICHFP) with a 4-PIN connector to the 4-PIN socket on the
rear of the unit.
The unit will automatically switch to
PA
mode when the mic switch is pushed "ON".
The
PA
output level can be adjusted using the rotary volume encoder
(1
).
With radio power off, the radio will wake up when
PA
mic button is pressed to make an
announcement. Please note that it will take a few seconds before the radio "wakes up"
and
PAis
active. Radio will return to the off state when the
PA
mic is released.

JHD36A
HEAVYDUTY
-----------------------------------------------------------------------------------------------------------------
Liquid
Crystal
Display
(LCD)
The current frequency and activated functions are shown on the LCD panel
(21
).
NOTE:
LCD
panels
may
take
longer
to
respond
when
subjected
to
cold
temperatures
for
an
extended
period
of
time. In addition, the
visibility
of
the characters
on
the LCD
may
decrease slightly. The LCD
display
will
return
to
normal
when
the temperature increases
to
a
normal
range.
Setting
the
Clock
To
set the clock to display the current time, turn the vehicle ignition on and turn the radio on.
Press PTY/CAT/MENU button (2) to enter the system menu and adjust the clock by selecting
the "Set Clock" menu item.
Press the INFO/ENTER button (16) to view the clock set screen.
Press
the
TUNE/SEEK
I<<
I
>>I
(18, 19) buttons to adjust the selected digit.
Press the INFO/ENTER button to move to the next digit. When no adjustment is made for five
seconds, the time will become set and normal operation will resume.
Scroll
When the information
Is
too long to be displayed on the LCD, press the DISP/SCROLL button
(12) to view the entire title. The information will scroll twice and then return to abbreviated text.
7

·:
tli}ilt
v;
JHD36A
HEAVYDUTY
-----------------------------------------------------------------------------------------------------------------
TUNER
OPERATION
Select
a
Band
Press the
BAND/WB
button (15) to change between three FM bands and two AM bands.
Press and hold
the
BAND/WB
button to access the Weather band (WB).
Manual
Tuning
Press the
TUNE/SEEK
1<<
or
>>I buttons (18, 19) to seek stations
up/
down
step
by step.
Auto
Seek
Tuning
Press and hold
the
TUNE/SEEK
1<<
or
>>I buttons (18, 19}
to
automatically
seek
the next
or
previous strong station.
NOTE: Seek
tuning
is
not
available
for
weather
band
channels. Use
the
up
or
down
tuning
buttons
to
manually
select
any
of
the seven available
weather
band
channels.
Preset
Stations
Six numbered preset buttons store and recall stations for each band.
Store
a
Station
Select a
band
(if needed), then select a station.
Press and hold
a preset button (5-1 0) for two
seconds.
The
preset
number
will appear on the LCD.
Recall
a
Station
Select a band (if needed). Press a preset button (5-10) to select
the
corresponding stored
station.
NOTE:
Preset
buttons
are
pre-assigned
frequencies
in
weather
band
mode.
8
Automatically
Store/
Preset
Scan
(AS/PS)
Automatically
Store
Select an AM
or
FM band.
Press and hold
the
AS/PS
button (14) for more than 2 seconds to
automatically select 18 strong stations (12 forAM). "Storing Presets" will appear on the screen
and the new stations will replace any stations previously stored.
Preset
Scan
Select a band. Press
AS/PS
(14) to scan preset stations stored in the current band.
The
unit will
pause for 5 seconds at each preset station. Press
AS/PS
again to stop scanning when the
desired station is reached.
RBDS
Operation
This unit is equipped to display RBDS (Radio Broadcast Data Service) information if broadcast
by
the current radio station.
NOTE: Radio
stations
broadcasting
RBDS
may
not
be
available
in
your
listening
area.
In FM radio mode, press the PTY/CAT/MENU button (2) to list the following Program Type
(PTY) options:
ANY
I
News
/Information
I
Sports
I
Talk
I
Rock
I
Classic Rock
I
Adult Hits
I
Soft
Rock
I
Top
40
I
Country
I
Oldies
I
Soft
I
Nostalgia
I
Jazz
I
Classical/
Rhythm and Blues
I
Soft
Rhythm
&
Blues
I
Foreign Language
I
Religious Music
I
Religious Talk
I
Personality
I
Public
I
College
I
Weather
I
Emergency Test
I
EMERGENCY!
To search
for
stations in a PTY category:
1.
Press the PTY/CAT/MENU button (2) to view the current PTY category.
2. Press the
TUNE/SEEKI<<
or
>>I buttons (18, 19) to move through the list of available
categories and select the program type you wish to search.
3. After selecting the desired PTY, press the
INFO/ENTER
button (16) to search the band for
broadcasts
of
this type. "PTY Search" is displayed while the
tuner
is searching.
NOTE:
Performing
a
PTY
search
on
"ANY"
will
Seek Tune
and
stop
on
any
station
broadcasting
RBDS,
regardless
of
the
program
type.

(
41it'fi
:i
JHD36A
HEAVYDUTY
-----------------------------------------------------------------------------------------------------------
Weather
Band
Operation
What
is
the NOAA Weather Radio/Weatheradio Canada?
NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that
broadcasts local weather emergency information 24 hours a day via the National Weather
Service (NWS) network. The U.S. network has more than 530 stations covering the 50 states as
well as the adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and the U.S. Pacific
Territories. Each local area has its own transmitting station and there are a total of seven
broadcasting frequencies used. A similar system is available in Canada under the Weatheradio
Canada service administered by Environment Canada.
Tuning
to
Weatherband
Press and hold the
BANDIWB
button (15) to access the Weatherband. The indication "WB" will
appear on the display panel, along with the current number and channel indication: "WB-1",
WB-2", "WB-3", "WB-4", "WB-5", "WB-6" or "WB-7". The seven frequencies are shown
In
the
following table:
WB
Frequencies
Frequency
(MHz)
Preset
162.400 2
162.425 4
162.450 5
162.475 3
162.500 6
162.525 -
162.550 1
The above table also shows which preset button will access the frequency. Note that one
frequency cannot be accessed using a preset button. The frequency can only be reached using
the tuning controls.
Use the TUNE/SEEK
I<<
or
>>I
buttons (18, 19) or the preset buttons to tune to each of the
seven channels until you find the weatherband station broadcasting in your area.
How
many
stations
can
I
expect
to receive?
Since the broadcasts are local weather and information, the transmission power is usually very
low (much less than standard AM or
FM
stations) so you will usually receive only one station
unless you are on the edge of two or more broadcast signals. The most you will receive will be
two or three, and that Is rare.
Is
it
possible
I
won't
receive
any
stations?
Depending on where you are located, there is a possibility you will receive only a very weak
signal or none at all. Also, similar to AM and FM signals, weatherband signals are subject to
9
surrounding conditions, weather, obstructions of the signal by hills or mountains, etc.
NOAA Weather
Alert
The WeatherAlert function adds an additional level of user safety by automatically switching
from any of the available function modes to weather band for a minimum
of
60 seconds If a
NOAAwarning tone
(1050Hz)
Is received/ detected. If no additional warning tone
Is
received for
60 seconds, the unit will switch back to the last known function mode. See "System Menu" on
page 6 to learn how to turn the
WB
Alert feature on.
SAME
Decoding
and
Filtering
Specific Area Message Encoding (SAME) data is also broadcast prior to alert broadcasts.
SAME data contains information about the geographic region affected by the alert, the type of
alert, and its effective time. The geographic region Included in the SAME data is called the
Geographical Area code and hasthe form PSSCCC where "P" represents a portion
of
the county,
"SS" is a two-digit state, territory, or offshore marine area identifier and "CCC" identifies the
county, province,
or
major metropolitan area within the state. This unit can be configured through
the system setting menu with up to seven Geographical Area codes to limit the automatic tuning
or power on functions described above.
SAME data also includes the type of alert being broadcast. This unit can be configured through
the System Setting Menu to limit the automatic tuning
or
power on functions based on the type
of alert.
SAME Is activated
by
programming a 6 digit code -called a FIPS code -into your radio. The
FIPS code
or
Federal Information Processing System code
is
a six digit code that identifies the
states and counties (or parishes)
In
the United States. The first digit identifies the county
subdivision. The next two digits Identify the state orterritory, and the last three identify the county.
The FIPS code for your area can be found by calling the NWS toll free number or visiting the
web site.
The phone number Is 1-888-NWS-SAME (1-888-697-7263). Upon calling, an automated system
will prompt you to enteryour state and county. When you confirm the Information, the system will
provide your six digit FIPS code.
The web site Is: www.nws.noaa.gov/nwr/indexnw.htm. Upon selecting your state from the chart,
you will see a listing of all the counties in that state. For each county there is a listing of the
SAME# (FIPS code), the location of the transmitter, the
WB
frequency, the call sign, the
transmitter power and miscellaneous remarks.
NOTE: Because
broadcast
areas overlap
you
may
want
to
set
more
than one S.A.M.E.
location.
ff
you
live
near
the
border
between counties,
you
may
want
to receive alerts
from
more
than
one
tower.
Your radio Is capable of being programmed
with
up to 7 different FIPS location codes. The
default code has been programmed at the factory -000000 -to respond to all messages within
your area.

c
slii'JI
"
JHD36A
HEAVYDUTY
-----------------------------------------------------------------------------------------------------------------
CD/
MP3/
USB
OPERATION
Digital
File
Playback
If the userconnects a USB mass storage device, the radio automatically powers on, if necessary,
and switches to digital file playback mode. Changing modes or turning off the radio pauses
playback. Playback shall resume exactly where paused when returning to digital file playback
mode.
Inserting
and
Ejecting
a
Disc
Insert a disc, label-side up, into the disc slot (22). The unit will automatically draw the disc
in
and
play the first track on the disc, whether the power was turned on
or
not.
Press the eject button (20) to stop disc play and eject the disc. The unit does not have to be on
to eject the disc. Disc will retract if not removed.
Inserting
a
USB
Device
The USB connector (17) is located on the right side of the front panel, behind a protective rubber
cover. Pull gently to lower the rubber cover and reveal the USB slot. Insert a USB device to
switch to USB mode and begin playback.
Controlling
File
Playback
Selecting Tracks
Press the TUNE/SEEKI<< or >>I buttons (18, 19) to advance to the next track/ file. The
selected track number will appear on the display.
Press and holdthe TUNE/SEEKI<<
or
>>1
buttons button
to
fast forward or fast reverse.
Playback begins when the button is released.
10
Play/
Pause
Disc
Playback
Press the
MUTE/>11
button (22) to pause playback. "Pause" is displayed on the screen.
Press the
MUTE/>11
button again to resume play.
Previewing
Tracks
Press the 2/INT button (6) to play the first 10 seconds of each track in the current folder
sequentially.
Press 2/INT again to stop lntro Scan and resume normal playback at the current track.
Repeat
Play
Press the 1/RPT button (8) during disc playback to repeat the current track.
Press 1/RPT again to stop repeat playback.
Random
Play
Press the 3/RDM button (5) during playback to play all tracks in the current folder in
random, shuffled order.
Press 3/RDM again to stop random playback.
Folder
Navigation
(MP3 Only)
Press the PTY/CAT/MENU button (2) to view a list of all songs in the current folder.
Press the TUNE/SEEKI<< or >>I buttons (18, 19) to navigate the list.
Press the INFO/ENTER button (16) to play the highlighted song or view files in the
selected folder. Continue pressing INFO/ENTER button until the desired file is selected.
Press the PTY/CAT/MENU button again to navigate up through the file structure.
The unit will automatically exit the folder navigation menu after 5 seconds of inactivity.
MP3
Specifications
Notes
on
MP3
Playback
Any directory that does not include an MP3 file is skipped
Maximum number of folders: 512 (including skipped directories)
Maximum number of folder levels: 12
Maximum number of MP3 files: 999
Maximum number of characters for MP3 file name and folder name: 32
Maximum number of Characters of 103Tag:
103 Tag version 1.0: 32
103 Tag version 2.x: 32
File
Playing
Order
Files will be continually played sequentially within the current folder.
To
play songs in another
folder, press the PTY/CAT/MENU button (2) twice to move up
a
folder level. Press the
TUNE/SEEKI<< or >>I buttons (18, 19) to navigate the list and then press the INFO/ENTER
button (16) to access the selected song orfolder.
You
may be able to set the order in which MP3/WMA are to be played by writing them onto a
medium such as a CD-R with their file names beginning with play sequence numbers such as
"01" to "99".

c:
li,'fiJt
;
JHD36A
HEAVYDUfY
-----------------------------------------------------------------------------------------------------------
SIRIUSXM™
RADIO
OPERATION
About
SiriusXM
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its
subsidiaries. Visit www.siriusxm.com/xmllneup for updates. All programming/ channel lineup/
XM service subject to change or preemption. All other marks and logos are the property of their
respective owners. All rights reserved.
NOTE: The
SiriusXM
Satellite Radio
controls
on
this
unit
are available
only
when an
optional
SiriusXM
Connect
Vehicle Tuner
is
connected.
~
@)
1
''"'
''''"'
'~~
~::
,:;:::o::
:C:C
o:2.
::::~
"""
"'''''"
'':: :·::
:"''"''"'"
"
''':::
:"'
'"'
:.
~;-
..
(
~
!
1
11
0 8
\!;
' ®
7
Accessing
SIRIUSXM
Mode
(Requires
optional
SIRIUSXM
tuner)
Press the MODE button (4) to change the mode to SiriusXM mode.
Accessing
your
SiriusXM
Radio
ID
The SiriusXM ID is required for activation.
To
display your SiriusXM radio ID, use the
TUNE/SEEK I<< (18) button to tune to channel "000". The screen will display "SIRIUSXM ID"
with the ID displayed in the middle of the LCD screen. The SiriusXM radio ID is 8 characters
long and does not include the letters
I,
0,
S, or
F.
Selecting
a
Band
In
SiriusXM mode, press the BANDJWB button (15) to access the SiriusXM user-preset channel
groups in the following order: SXM1, SXM2, SXM3.
Category
Tuning
1.
Press the PTY/CAT/MENU button (2) to access Category mode.
2.
While in category mode, press 5/CAT- OR 6/CAT+ buttons (9, 10) to choose a category.
3.
Press the TUNE/SEEKI<< or
>>1
buttons (18, 19) to navigate channels in that category.
(The current channel number within the chosen category will always be the default first
channel tuned.)
11
4.
Press the INFO/ENTER button (16) to select the desired channel.
Channel
Up/
Down
Tuning
Press the TUNE/SEEKI<< or >>I buttons to search for a channel. Press andholdthe
TUNE/SEEKI<< or
>>1
buttons to fast search.
Direct
Tuning
Mode
1.
Press
and
holdthe INFO/ENTER (16) button to enter direct tuning mode.
2. Press TUNElSEEKI<<
or
>>1
(18, 19) buttons to change the first of three digits for the
desired channel in the direct entry screen.
3.
Press the INFO/ENTER button to confirm the entered digit and move to the second digit
field.
4.
Press TUNElSEEKI<<
or
>>1
buttons to select the second digit.
5. Press
the
INFO/ENTER button to confirm the entered digit and move to the third digit field.
6.
Press TUNE/SEEKI<<
or
>>I buttons to select the third digit.
7. Press the INFO/ENTER button to confirm the three digit channel and tune to the selected
channel.
Storing
Preset
Channels
The preset buttons
(5-1
0) can be used to store 6 channels, allowing convenient access to your
favorite channels.
Programming
Channels
1
. Select the channel you want to store in memory.
2.
Press andholda preset button
(5-1
0)
until the corresponding preset button number
appears.
3.
Repeat steps 1 and 2 to program additional channels.
Preset
Recall
Press one of the six preset buttons
(5-1
0) to directly select a preset channel stored
in
the current
band. ·
Preset
Scan
Press AS/PS button (14) to scan stations stored in all three user-preset channel groups (SXM1,
SXM2 and SXM3). The unit will pause for 10 seconds at each preset station.
Preset
Tuning
In
Preset Tuning Mode, you can use the TUNE/SEEKI<< or >>I (18, 19) buttons to access all
18 preset stations in sequential order. Access preset tuning mode through the system menu.
Set Preset-Only Tuning to "ON."
Alternate
Display
Mode
Press the DISP/SCROLL button (12) to change the display information between single and dual
line text display. In dual line mode, both artist and title are available for viewing.
Press and holdthe DISPISCROLL button to scroll the Artist/ Song Title information.
While in category tuning list mode, press the DISP/SCROLL button in sequence to change the
display information from Channel Name, Artist, and Song Title.

tiHib
, JHD36A
HEAVYDUTY
--------------------------------------------------------------------------------------------------------------------
Satellite
Signal
Strength
The display will Indicate satellite reception strength
as
shown below.
Signal Strength Strength Display
No Signal
YX
Weak
Y.
Good
Y.a
Excellent
Y.tl
Channel
Lock
Access Channel Lock through the System Menu under the "SiriusXM Satellite Radio" menu. See
"System Menu"
on
page
6.
1.
Select "Set Lock Code" and press the
INFO/ENTER
button (16).
2.
Enter the default lock code of"0000".
To
set the lock code:
a.
Press the
TUNE/SEEKI<<
or
>>1
(18, 19) buttons to enter the first digit of the default
code.
b.
Press the
INFO/ENTER
button to move to the next digit.
c.
Repeat above steps to enter all 4 digits of the default code.
d.
Press the
TUNE/SEEKI<<
or
>>1
buttons to enter the first digit of the new code.
e.
Press the
INFO/ENTER
button to move to the next digit.
f.
Repeat above steps to enter all 4 digits.
g.
Repeat above steps to confirm the new code.
3.
After setting a new four digit code, you can lock channels by entering the "Locked
Channels" menu.
4.
Upon entering the Locked Channels list, you will be prompted to enter your four digit code.
a.
Press the
TUNE/SEEKI<<
or
>>I
buttons to enter the first digit.
b.
Press the
INFO/ENTER
button to move to the next digit.
c.
Repeat above steps to enter all 4 digits.
5.
After entering the code, you can navigate the list using the
TUNE/SEEKI<<
or
>>1
buttons
to highlight the channels.
6.
Press the
INFO/ENTER
button to Lock, indicated by
a(@),
or Unlock (
{j;)
the selected
channel.
12
Reset
SiriusXM
Channel
Lock
Code
If you forget your Parental Control lock code, use the following directions to reset the code to the
default "0000". Resetting the lock code will not affect the locked channels list.
1.
In
SirlusXM mode, tune to Channel 0
2.
Set volume to
0.
3.
Press
and
hold
the rotary encoder
(1)
to power off the unit.
4. With power off,
press
and
hold
the rotary encoder until the system version info
is
displayed
on
the screen
5.
Press the
3/RDM
button
(5),
the screen will return to the clock.
6.
Press the rotary encoder to power
on
the unit.
7.
The lock code has now been reset to "0000"

(:4iftib> JHD36A
HEAVYDUTY --------------------------------------------------------------------------------------------------------------------
Advisory Messages Reported by the SiriusXM Vehicle Tuner
On-Screen Display Advisory Message Cause Explanation/ Solution
Check Antenna Check Antenna The radio has detected a fault with the SiriusXM antenna. The .Verify that the antenna cable is connected to the SiriusXM
antenna cable is either disconnected or damaged. Connect Vehicle Tuner.
. Inspect the antenna cable for damage and kinks. Replace the
antenna if the cable is damaged.
Check Tuner Check Tuner .The radio is having difficulty communicating with the SiriusXM . Verify that the SiriusXM Connect Vehicle Tuner cable is securely
Connect Vehicle Tuner. connected to the radio SiriusXM mating connector/ cable.
.The tuner may be disconnected or damaged. . If the problem persists, disconnect and reconnect the tuner and
then contact your dealer.
No signal No signal The SiriusXM Connect Vehicle Tuner is having difficulty receiving .Verify that your vehicle is outdoors with a clear view of the
the SiriusXM satellite signal. southern sky.
.Verify that the SiriusXM magnetic mount antenna is mounted on
a metal surface on the outside the vehicle.
. Move the SiriusXM antenna away from any obstructions.
. Inspect the antenna cable for damage and kinks. Replace the
antenna if the cable is damaged.
. If the problem persists, disconnect and reconnect the tuner and
then contact your dealer.
Scrolling "Subscription Subscription Updated The radio has detected a change
in your SiriusXM subscription . Press any key to clear the message.
Updated" -press any status. . No further action is required.
key to continue" .Questions about your subscription in the United States please
visit www.siriusxm.com/activatenow or call SiriusXM Listener
Care at 1-866-635-2349
.Questions about your subscription in Canada, please visit
www.siriusxm.ca/activatexm or call
XM Listener Care at
1-877-438-9677
Chan Unavailable Channel Not Available The channel that you have requested is not a valid SiriusXM channel Visit www.siriusxm.com/channellineup for more information about
or the channel that you were listening to is no longer available. You the SiriusXM channel lineup.
may also see this message briefly when first connecting a new
SiriusXM Connect Vehicle tuner. Visit www.siriusxm.com for more
information about the SiriusXM channel lineup.
Ch Unsubscribed Channel Not Subscribed The channel that you have requested is not included in your .Questions about your subscription in the United States please
SiriusXM subscription package or the channel that you were visit www.siriusxm.com/activatenow or call SiriusXM Listener
listening to is no longer included in your SiriusXM subscription Care at 1-866-635-2349.
package. .Questions about your subscription in Canada please visit
www.siriusxm.ca/activatexm or call
XM Listener Care at
1-877-438-9677.
13

c-
wiKiB
j
JHD36A
HEAYYDUTY
--------------------------------------------------------------------------------------------------------------------
On-Screen Display Advisory Message Cause Explanation/ Solution
Chan Locked Channel Locked The channel that you have requested is Locked by the radio See the section on Parental Control, page 12 for more information
Parental Control feature. on the Parental Control feature and how to access locked channels.
Enter Code:
----
Enter Lock Code User prompted to enter the lock/ unlock code. Enter the four digit code to unlock the channel
Wrong Code Invalid Lock Code The unlock code entered by the user is incorrect
.
Input the correct four digit code to unlock the channel.
•
Reset lock code to default following Instructions on page 12.
14

HEAVY DUTY
14
t
18
~ -
J ~
...... ""'
~~o
if
This unit is equipped with an iPod ready function that will allowyou to control your IPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
iPod Nano 5G, 6G,
7G
iPod Classic
iPod Touch 3G, 4G, 5G
!Phone 4, 4S,
5, 5C, 5S
NOTE: Earlier model iPod's are not supported because they do not implement the
required control protocol. Also, the iPod shuffle is not supported because it does not
utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be
connected to the radio using one of the Auxiliary Inputs .
Accessing iPod Mode
Connect a supported IPod or IPhone to the front
panel USB (or Rear USB) connector (17). The iPod
icon illuminates in the bottom left corner of the LCD
whenever an IPod
or !Phone is attached to the USB
connector. Music playback begins automatically. To
enter iPod modefrom any other source, press the
MODE button (4) until "iPod" appears on the display.
Ifthe user connects an IPod containing
no songs, the
radio will displaya message stating "No Songs" In
iPod mode.
D
h_ -J
!Pod touch
~
~(o).J
iPod dassk
~
'@I
tJ
IPod nano i Phon~ 4
15
JHD36A
Turning the iPod On/ Off
The IPod power turns on automatically when it is connected to the front panel USB port, as long
as the vehicle ignition isturned on.
You can turn the iPod off by disconnecting It or byturning the
Ignition off. When the ignition is off, the iPod will pause and then enter sleep mode after 2
minutes. While the IPod is connected, the power cannot be turned on
or off from the IPod itself.
NOTE: The iPod will continuously recharge while in iPod playback mode.
Controlling Playback
Pausing Playback
During playback, press the MUTE/>11 button (24) to pause the iPod player. "Pause" will appear
on the LCD. Press
MUTE/>11 again to resume playback.
Repeat Play
During playback, press the 1/RPTbutton (8) to repeat the current song. "RPT" will appear on the
LCD. Press 1/RPT again to stop repeat playback.
Random Play
During playback, press the 3/RDM button (5) to play all songs in the current category in random
order. Random play will begin once the current song has finished playing. "ROM" will appear on
the LCD. Press 3/RDM again to stop random playback.
Selecting Tracks
During playback, press the TUNE/SEEKI« or »I buttons (18, 19) to play the previous or next
track in the current category. Press the TUNE/SEEK
I« button once to play the song from the
start position
or press TUNE/SEEK I« twice to play the previous track. Pressi ng the
TUNE/SEEK I<< button during the first 2 seconds of a track will play the previous track.
After2 seconds, this action returns to the beginning of the current track.
Press
and holdthe TUNE/SEEKI« or >>I button to fast reverse/forward the song.
NOTE: If you press and hold the TUNE/SEEK]<< or »I button to change the current song
to the previous/next song , you will exit fast reverse/forward mode .
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the displayinformation between single and
double line text display.
Playlist Search
Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category
mode, press the
TUNE/SEEKI« or »I buttons to choose file search by Playlist,Artist, Album,
Genre, Song, Audiobook or Podcast. Press the INFO/ENTER button (16) to select the search
mode. Use the TUNE/SEEKI<<
or »I buttons to search the available files on the iPod.
Press the INFO/ENTER button to play the selected song or file.

(
lilfiP
> JHD36A
HEAYYDurY
--------------------------------------------------------------------------------------------------------------
BLUETOOTH
OPERATION
The
JHD36A
includes built-In Bluetooth technology that allows you to wirelessly connect this
head unit to Bluetooth devices for streaming audio playback
About
Bluetooth
Technology
Bluetooth is a short-range wireless radio technology. Operating in
the
2.4
GHz
frequency range,
it transmits voice and data
at
speeds up to
2.1
Mbit/s over a range of up to 1
0 meters.
Bluetooth
Menu
Options
NOTE: Please
note
that
some
BT
menu
options
are
only
available
while
the
unit
is
in
Bluetooth
Audio
mode.
Press
and
hold
the
PTY/CAT/MENU button (2) to enter menu adjustment mode. Repeatedly
press
the
TUNE/SEEKI<<
or
>>1
buttons (18, 19) to access the "Biuetooth
On/
Off"
menu
function. Press the
INFO/ENTER
button (16) to turn the Bluetooth function On
or
Off. The
following menu options are available when the unit
Is
in Bluetooth mode.
BT
ON/
OFF:
Press the INFO/ENTER button (16) to select "BT ON"
or
"BT OFF". When
"On", the LCD will display the Bluetooth icon @ (default "BT ON").
BT
HFP
Volume:
Press the INFO/ENTER button repeatedly to adjust the ring volume from
0-40 (default 35/prevlous setting).
BT
Device
List:
Press the INFO/ENTER button to view a list of previously paired mobile
phone device models. Press the
TUNE/SEEKI<<
or
>>1
buttons (18, 19) to view devices
from the list. You cannot delete a device that is actively connected. Press the
INFO/ENTER
button to select the device. Press the
TUNE/SEEKI<<
or
>>I button to
choose Lock/ Unlock, Disconnect
or
Delete for this device.
LOCK/
UNLOCK: The
JHD36A
can store
up
to 5 devices for Bluetooth connection.
The
devices are stored in FIFO (First in First Out) order. To prevent a device from
being bumped from the list when more than 5 devices are used, you
must
lock the
device. To lock/ unlock a device, press the
INFO/ENTER
button to display/ change
the Locked
or
Unlocked Icon.
DISCONNECT: To disconnect a paired device, press the INFO/ENTER button to
temporarily remove the Bluetooth link. The link can be re-established through your
phone menu
by
selecting the
JHD36A
for connection.
DELETE: To delete a device from the list, press the
INFO/ENTER
button.
NOTE: Device must be disconnected
to
be deleted.
BT
Pair:
Press
the
INFO/ENTER
button to turn
BT
Pair "On" to put the unit pairing mode
to search for and be discovered
by
Bluetooth devices.
BT
Auto
Answer:
Press the INFO/ENTER button to turn theAuto
Answer
function "On"
or
"Off".
16
Press
BT
Device
INFO/ENTER
L
Device
1 _
Device
5-
Use
TUNE/SEEKI<<
or
>>I
to Navigate the List
Device 1
Device 2
Device 3
Device 4
Device 5
Lock/ Unlock
Connect/ Disconnect
Delete
Lock/ Unlock
Connect/ Disconnect
Delete
Pairing
a
Bluetooth
Device
Press
INFO/ENTER
Before you begin, consult the owner's manual
for
the Bluetooth device you want to pair with the
JHD36A.
1.
Make sure the device is on and ready to receive a signal from theJHD36A. With the
JHD36A
in Bluetooth Audio mode, choose "BT Pair" from the
JHD36A
menu and press the
INFO/ENTER
button (16) to begin pairing.
The
unit is
now
waiting to connect to a mobile
phone device. With the Bluetooth function of the mobile phone device turned on, search
for a Bluetooth device.
2. When the Bluetooth device has completed its search, the mobile phone will display the
Bluetooth device name (JHD36A).
3. Select JHD36A.
The
BT
AUDIO icon (
JJ
)will appear on the radio LCD.
4. Enter the pairing password (0000), if requested.
After
connecting successfully, you will be able
to
listen to music stored on your Bluetooth
enabled device through the radio.

HEAVY DUTY
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is connected. To
access Bluetooth mode and play songs stored on your phone, press the MODE button (4).
While in BT mode, the BTAUDIO icon (
J'J )will illuminates on the LCD.
Selecting Tracks
During playback, press the TUNE/SEEKI<< or >>I (18, 19) buttons to play the previous or next
track.
Pausing Playback
During playback, press the MUTE/>11 button (24) to pause the BTAUDIO player. "BT Audio
Pause" will appear on the LCD. Press
MUTE/>11 again to resume playback. If you change to
another mode, the mobile phone audio will pause. Press the
MODE (4) button to return to
Bluetooth mode and resume mobile phone audio playback.
NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the
device
is disconnected inadvertently, the unit will automatically search for the matching
Bluetooth device when the power is restored.
Incoming/ Outgoing calls
While the mobile device is connected through Bluetooth, the phone number for incoming calls
will appear on the LCD. The incoming ring will be output through the unit unless the unit is
broadcasting a Weather Band Alert or the
PA system is in use.
Answer Call
If the Bluetooth Auto Answer function is turned "Off', the user must press the "CALL" button (3)
to receive and incoming call.
Ifthe BTAuto Answer function
is turned "On", the unit will automatically receive the incoming call
after 5 seconds of ringing.
While the microphone (JMICHFP) is connected to the unit, the user can answer incoming calls
through the Microphone.
Transfer Call
During the call, press and holdthe "CALL" button transfer the call between the unit and the
mobile device.
End Call
Press the "CALL" button to end a call. The unit will return to the previous mode.
Reject Incoming Call
To reject an incoming call, press and hold the "CALL" button.
17
JHD36A
APP OPERATION
JENSEN®Specialty Controller is the ultimate wireless remote control for your JENSEN stereo
system. Store away your old remotes and enjoy the convenience of all the primary functions of
your JENSEN stereo right from your phone ortablet by transforming your mobile device Into a
functional stereo remote control!
Features
This app controls all of the primary functions of your stereo features including:
Power on/ off
Volume and mute
CD player
AM/FM radio tuner: access station, recall, store presets, switch songs
NOAA weather band and alert
Bluetooth®streaming audio
File structure visibility, track selection, track audible scan up and down via USB
iPod/ iPhone/
iPad® control capabilities via USB
Auxiliary audio input control -auxiliary analog 1 & 2
Audio menu controls- bass, treble, balance, fader, equalizer, volume and speaker
selection settings
• Visual display feedback so you can see artist title and album on your mobile screen
Connecting and using jHD Control app
The jHD Control app can be found on the App Store for Apple Devices and the Google Play
Store forAndroid Devices. After downloading and Installing jHD Control app on your device, pair
your device to the JHD36Aas stated above for Bluetooth pairing. Once your device is paired you
can open and begin using the app.
When jHD Control is installed on Android operating system, close the app before Bluetooth
pairing, otherwise there may be errors on Bluetooth connection.

(
••JJib
j JHD36A
HEAVYDUTY
--------------------------------------------------------------------------------------------------------------------
CARE
AND
MAINTENANCE
Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain
minerals that can corrode the electronic circuits.
Keep the product away from dust and dirt, which can cause premature wear of parts.
Handle the product gently and carefully. Dropping the unit can damage circuit boards and
cases, which
may
cause the product to work improperly.
Wipe the product with a dampened cloth occasionally to keep
It
looking new. Do not use
harsh chemicals, cleaning solvents, or strong detergents to clean the product.
Use and store the product only in normal temperature environments. High temperature
can shorten the life of electronic devices, damage batteries, and distort or melt plastic
parts.
Ignition
The most common source of noise in reception is the Ignition system. This is a result of the radio
being placed close to the ignition system (engine). This type of noise can be easily detected
because it will vary
In
intensity of pitch with the speed of the engine.
Usually, the ignition noise can be suppressed considerably by using a radio suppression type
high voltage ignition wire and suppressor resistor in the ignition system. (Most vehicles employ
this wire and resistor but it
may
be necessary to check them for correct operation.) Another
method
of
suppression is the use of additional noise suppressors. These can be obtained from
most CB radio
or
electronic supply shops.
Interference
Radio reception in a moving environment is very different from reception in a stationary
environment (home). It is very important to understand the difference.
AM reception will deteriorate when passing under a bridge or when passing under high voltage
lines. Although AM
is
subject to environmental noise, it has the ability to be received at great
distance. This is because broadcasting signals follow the curvature of the earth and are
reflected back by the upper atmosphere.
18
TROUBLESHOOTING
Symptom Cause
No power The vehicle's accessory
switch is not on
Fuse is blown
No sound Volume too low
Wiring is not properly
connected
The operation keys do Control panel
is
not
not work properly installed
Built-in microcomputer
is
not operating properly
due to noise
Cannot tune to radio Antenna cable is not
station, auto-seek does connected
not work Signals are too weak.
ERROR-01 on LCD Database or decoder
error
ERROR-02 on LCD No songs on device
ERROA-03 on LCD Abnormal current to USB
device
ERROR-04 on LCD iPodl iPhone is not
verified
ERROR-05 on LCD Disc not supported
Solution
If the power supply
is
properly
connected to the vehicle's
accessory terminal, switch the
ignition key to "ACC".
Replace the fuse.
Adjust volume to audible level.
Check wiring connections.
Reinstall control panel.
Press the RESET button.
Insert the antenna cable firmly.
Select a station manually.
Change to another mode.
Remove device and add songs.
Change mode or unplug and
reconnect USB device.
Unplug and reconnect iPodl
iPhone.
Remove disc and insert supported
CODA or CD-ROM disc