Jensen Vm9412 - in-dash dvd receiver User manual

160

DIV

Watts Peak

Watts en Crête

Vatios el Máximo

40W x 4

VM9412

Press Audio Enter

SRC STOP

REAR SCNRPT RDM STOP

REAR SCNRPT RDM

PTY

MUTE

BAND AS

DISP

OPEN

BAND AS

DISP

OPEN

BAND CLOSEAS DISP

PICTUREANGLE / TILT

Multimedia Receiver

WIDE

Installation and Operation Manual

video

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to

use all the features of your new Jensen VM9412 Mobile Multimedia Receiver for maximum

enjoyment.

Preparation............................................................................................................................ 1

Installation............................................................................................................................. 5

Anti-Theft Feature................................................................................................................. 6

Controls and Indicators......................................................................................................... 7

Remote Control..................................................................................................................... 9

Using the TFT Monitor ........................................................................................................ 12

Operating Instructions......................................................................................................... 14

Multi-ZONE Operation......................................................................................................... 15

Setup Menu......................................................................................................................... 16

Tuner Operation.................................................................................................................. 18

Satellite Radio Operation.................................................................................................... 20

DVD/VCD Video Operation................................................................................................. 22

DVD/CD Audio Operation ................................................................................................... 25

MP3/WMA/iPod Operation.................................................................................................. 26

Troubleshooting .................................................................................................................. 29

Specifications...................................................................................................................... 32

VM9412

PREPARATION

Congratulations on your purchase of the Jensen VM9412

Mobile Multimedia Receiver.

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Jensen VM9412

installed by a reputable installation shop.

Features

DVD

• Aspect Ratio - Full, Normal and OFF

• Fast Forward - 2X, 4X, 8X and 32X

• Slow Motion - 1/2, 1/4, 1/6 and 1/7

• Play, Pause, Stop, Next Chapter and Previous Chapter

• ESP - 2MB Buffer

CD / MP3 / WMA

• ID3 Tag Compatible

• Directory Search

• Direct Track Access via Remote control

• Burn Up To 1500 MP3 / WMA Files onto a DVD+R/RW

• Audible Forward / Reverse Track Search

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

• ESP - 2MB Buffer

AM-FM

• USA/Europe/Latin America/Asia Frequency Spacing

• 30 Station Presets (18 FM, 12 AM)

• Auto Stereo/Mono

• Local/Distance

• Auto Store/Preview Scan

• RDS (Radio Data System)

Sat Radio Ready

• Compatible with XM and Sirius Tuners (Sold Separately)

• Requires XMDJEN100 or JXMC Cables (Sold

Separately)

• Satellite Channel Name, Artist, Song and Categories

Displayed on TFT Screen

iPod

• jLinkDirect - High Speed Direct Connect Interface to

Access iPod Playlists, Artists, Albums, Songs, **Photos

and **Video (** Requires Photo or Video iPod)

• Power Management Charges iPod while Connected

• Requires jLinkCable (Sold Separately)

MediaLink3

• Under Dash Interface Allows Portable Media Devices to

be Connected

• MediaLink3Includes the following connectivity:

• jLinkDirect 8-pin DIN for iPod

• 3.5mm Audio Only Input

• RCA Audio/Video Input

Chassis

• 1.0 DIN (Import/ISO-DIN Mountable)

• Motorized/Swivel Flip-Out/Flip-Up LCD Screen

• 7" TFT Active Matrix LCD with Anti-Glare Coating

• Screen Tilt/Angle Adjustment

• Heat Management System - Forced-Air Cooling to Keep

the Chip-Sets Operating at Nominal Temperatures

General

• Navigation Ready (NAV101 Only)

• 38-Key Infrared Remote Control with 5-Way Joystick

• Two Composite Video Outputs for Additional Screens

• Compatible with MZ7TFT Rear Seat Monitors with

Touch Screen Interface

• Two Audio/Video Auxiliary Inputs

• 100-Ohm Preamp Line Output - All Audio Channels

• 4VRMS Line Output - All Channels

• Rotary Encoder Audio Control

• Seven-Band EQ with Eight Preset EQ Curves

• Spectrum Analyzer

• Front, Rear, Center and Subwoofer Line Output

• Subwoofer Crossover and Phase Control

• Dolby Digital/Pro-Logic ll

• Programmable Volume Control

• Rear Camera Input (Normal and Mirror Image View)

• Auto TFT Dimmer

• 5-Way Joystick

Optional Accessories

• jLinkCable - iPod interface Cable

VM9412

Optional Equipment

•NAV101

The VM9412 is "navigation ready." Before accessing

any navigation features, you must purchase and install

the NAV101 module. All installation and operating

instructions will be included with the NAV101 navigation

module.

Once the NAV101 is connected and operating properly,

the NAV source mode will become active. While the

NAV101 is not installed, the NAV option appears gray,

indicating the function is not available.

•Rear Camera

The VM9412 is "camera ready." Before accessing any

camera features, you must purchase and install a rear

video camera. Once the rear camera is connected and

operating properly, the CAMERA source mode will

become active. While the camera is not installed, the

CAMERA option appears gray, indicating the function is

not available.

•Satellite Radio Tuner

See “Satellite Radio Operation” on page 20.

•iPod

See “MP3/WMA/iPod Operation” on page 26.

Optional Accessories

• jLinkCable - iPod interface Cable

Tools and Supplies

You will need these tools and supplies to install your

VM9412:

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket

wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and

remove the negative (-) battery cable prior to installation.

NOTE: If the VM9412 is to be installed in a car equipped

with an on-board drive or navigation computer, do not

disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under

these conditions, use extra caution during installation to

avoid causing a short circuit.

WARNING! Only connect the unit to a12-volt power

supply with proper grounding.

WARNING! Never install this unit where operation and

viewing could interfere with safe driving conditions.

WARNING! Toreduce the risk of a traffic accident (except

when using for rear view video camera) never use the

video display function while driving the vehicle. This is a

violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside

this unit, avoid impact to the TFT monitor.

WARNING! Using an improper fuse may cause damage

to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized

mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually,

other than in the manner explained in “Monitor Left/Right

Angle Adjustment” on page 12.

VM9412

Antenna Jack

Harness Cord

ACC

Auto antenna control (connect to antenna

control lead & power supply of antenna

amplifier)

External power amplifier control

GND

BATT

ACC

ANT.CONT

P.CONT

REAR L

FRONTL

FRONTR

REAR R

PINK

BLACK

BLUE

BLUE/WHITE

WHITE/BLACK -

GREEN/BLACK -

YELLOW

RED

WHITE +

GREEN +

PURPLE +

PURPLE/BLACK -

GREY/BLACK -

GREY+

FRONTL+

FRONTL-

FRONTR+

FRONTR-

REAR R+

REAR R-

REAR L+

REAR L-

Car

Antenna

FUSE (15A)

Battery

Ignition Switch

Rear Video 2

BATTERY

External Power Amplifier

BATTERY +

Ground

WHITE

YELLOW

RED

Mute (leave open if not connected)

MUTE

BROWN

Car Phone

SUB.W

REAR L

REAR R

BLUE

RED

WHITE

FRONTL

FRONTR

RED

WHITE

RED

Rear Video 1

YELLOW

WHITE

YELLOW

RED

Rear View

Video Camera

External AV System

YELLOW

BLACK MZ-TFT Touch Screen

(Sold Separately)

MediaLink

Bus

SATRadio

AUXIN1

SATL

SATR

VIDEO OUT 1

VIDEO OUT 2

MZ-TFT

CAMERA

AUXIN2

PRK SW

See the MediaLink and Satellite Connections diagram for more information

about connecting a satellite receiver and an iPod (through the MediaLink).

*MediaLink

* Satellite

Receiver

Connections

PARKING BRAKE

REVERSE +

GREEN/WHITE

WHITE

RED

NAV101 Input

HEADPHONE

MULTIZONE

WIRELESS HEADPHONE

(OPTIONAL)

WHITE

YELLOW

RED

WHITE

YELLOW

RED

YELLOW

WIRING DIAGRAM

VM9412

jLink iPod Cable

(Sold Separately)

iPod Nano

iPod Mini

iPod

iPod Video

SATRadio

SATL

SATR

To Head Unit

VIDEO LEFT RIGHT

3.5mm - Audio

MediaLink

MEDIALINK AND SATELLITE CONNECTIONS

*SAT Cable Kit: JXMC or XMDJEN100 (sold separately)

**XM or Sirius satellite tuner (sold separately)

VM9412

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the half-

sleeve from the radio.

2. Install the half-sleeve.

a. Install adapter if necessary (optional).

b. Install half-sleeve into adapter or dashboard (use

only the supplied screws). Do not force the sleeve

into the opening or cause it to bend or bow.

c. Locate the series of bend-tabs along the top,

bottom and sides of the mounting sleeve. With the

sleeve fully inserted into the dashboard opening,

bend as many of the tabs outward as necessary so

that the sleeve is firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

CAUTION! Be careful not to damage the car wiring.

3. Place the radio in front of the dashboard opening so the

wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the

ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct

type and amperage to avoid damaging the radio. The

VM9412 uses one 10 amp mini-ATM fuse, located in the

black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to

confirm operation (ignition switch must be on). If unit does not

operate, recheck all wiring until problem is corrected. Once

proper operation is achieved, turn off the ignition switch and

proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve, making

sure it is right-side-up, until it is fully seated and the

spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the

chassis must be mounted within 20° of horizontal. Make

sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap

(supplied) to the screw stud on the rear of the chassis

using the hex nut provided. Fasten the other end of the

perforated strap to a secure part of the dashboard either

above or below the radio using the screw and hex nut

provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with

the strap to prevent damage to the dashboard from the

weight of the radio or improper operation due to

vibration.

5. Replace any items you removed from the dashboard.

Final ISO-DIN Installation

1. Remove trim ring.

2. Mount factory brackets on new radio using existing

screws from old radio.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

VM9412

sAudioEnter

SRC STOP

REAR SCN

RPT RDM

PTY

MUTE

Pres

BAND AS

DISP

OPEN

PREPARE RADIO

INSTALL HALF SLEEVE

VM9412

sAudioEnter

SRC STOPREAR SCNRPT RDM

PTY

MUTE

Pres

BAND AS

DISP

OPEN

FINAL INSTALLATION

VM9412

sAudio Enter

SRC STOP

REAR SCN

RPT RDM

PTY

MUTE

Pres

BAND AS

DISP

OPEN

FINAL ISO-DIN INSTALLATION

VM9412

ANTI-THEFT FEATURE

The VM9412 is equipped with an anti-theft feature requiring

the user to enter a password upon initial power on.

The default user password is 012345 (6 digits).

To change the anti-theft and RATINGS protection password,

perform the following steps:

1. Press the SETUP button (31) on the remote control or

touch the button on the screen to enter the

“SETUP” menu.

2. Touch RATINGS to view the “RATINGS” sub-menu. The

small "lock" icon will be “unlocked”.

3. Enter a new 6-digit password and press ENTER.

The "lock" icon will lock and the new anti-theft password

will be set, as well as the password for RATINGS

protection (see “Rating Sub-menu Features” on

page 17).

NOTE: If you forget your password, contact Customer

Service at 1-800-323-4815 for assistance.

VM9412

CONTROLS AND INDICATORS

Button Operation

1. OPEN/CLOSE

Press to activate the automatic mechanical system and

move the TFT monitor into viewing position. Press again to

close the TFT.

2. DISP

Press to cycle through information available on the LCD

screen.

3. AS

Press to automatically store the first six strong stations in

preset memory. Applies to current band only.

4. BAND

Press the BAND button to change the AM, FM or SAT

band.

5. AUDIO

Rotate to adjust the volume. Press to enter and/or confirm

audio settings.

6. SRC

Press to select playing mode.

7. LCD Display

8. MUTE

Press to silence the receiver. Press again to resume previous

volume level.

NOTE: The VM9412 features Softmute, which will allow

the volume to increase or decrease gradually when the

MUTE function is activated or deactivated.

9. IR Remote Control Receiver

10. (left joystick)

DVD/Disc Mode: Press once to play back the previous

chapter/track.

TUNER Mode: Press once to auto-search for the previous

available radio station.

MENU Mode: Press once to move the cursor to the left.

11. (down joystick)

DVD/Disc Mode: Press once for slow forward/slow reverse.

TUNER Mode: Press to go down one frequency step.

MENU Mode: Press once to move the cursor down.

12. Reset

Press to reset system settings to factory default (except the

password and parental lock setting).

618 19

VM9412

s Audio Enter

SRC STOP

REAR SCNRPT RDM

PTY

MUTE

Pres

21 12

10 11

BAND AS

DISP

OPEN

VM9412

618 19

VM9412

s Audio Enter

SRC STOP

REAR SCNRPT RDM

PTY

MUTE

BAND AS

DISP

OPEN

BAND AS

DISP

OPEN

BAND CLOSEAS DISP

PICTUREANGLE / TILT

Multimedia Receiver

WIDE

Pres

21 12

10 11

CONTROLS AND INDICATORS

13.Pause/Play/Enter

Press to pause or resume playback or to confirm current

selection.

14. (right joystick)

DVD/Disc Mode: Press once to enter the next chapter or

track.

TUNER Mode: Press once to auto-search the next available

radio station.

MENU Mode: Press once to move the cursor to the right.

15. (up joystick)

DVD/Disc Mode: Press once for fast forward/fast reverse.

TUNER Mode: Press to go up one frequency step.

MENU Mode: Press once to move the cursor up.

16. ( )

Press once for disc insertion/ejection.

Press and hold to reset core mechanism position.

17. TFT Display

18. REAR

Select rear zone source. Allows front passengers to listen to

the radio while rear passengers listen to a CD, MP3, WMA or

watch DVDs.

19. RPT

Press to control repeat playback function.

20. SCN

Press to initiate Preview Scan.

21. RDM

Press to control Random playback function.

22. STOP

Radio Mode: Stop AS/PS/Seek procedure.

DVD/Disc Mode: Press the first time to pause playing.

Press the second time to stop playing and return to the first

track/chapter of the disc.

23. WIDE

Press to adjust the display aspect of the picture to one of two

settings: Full or Normal.

24/25. ANGLE/TILT

Press to activate the tilt function. Use the joystick to make

adjustments while the red tilt icon is flashing. Press once to

adjust the downward tilt angle of the screen one step at a

time or press and hold to adjust the angle in a continuous

motion.

VM9412

REMOTE CONTROL

The VM9412 Remote controls both the front and rear zones.

To switch from front to rear zone, move the F/R switch (32)

located on the right side of the controller.

NOTE: Your remote control may differ slightly from the

one pictured here. The above diagram is for illustrative

purposes only.

VM9412

Table 1: Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod

MENU 1 Enters the main menu of the

disc Turns on/off PBC when play-

ing VCD Displays diagnostics screen

TITLE 2 Enters the title menu of the

disc Plays first ten seconds of

each chapter/title Category list in CG mode

MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output

POWER/ 4 Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off

AUDIO 5 Changes the audio language

for disc playback Selects iPod Music mode

RPT A-B 6 Setup to repeat playback from

time frame A to time frame B Setup to repeat playback from

time frame A to time frame B

RPT 7 Repeats playback of current

chapter Repeats playback of current

track Repeats playback of current

track

SRC 8 Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode

SUBTITLE 9 Language selection for subti-

tle Selects iPod Photo mode

DISP/

CLEAR 10 Displays playing information/

Delete entry or move back-