Jensen VX3012 User manual

VX3012
Operation Manual
160watts peak
40W x 4
7" Single DIN Multimedia Receiver
DVD / Built-In BT Technology /
iPhone® / iPod® / USB / AV In

2
CONTENTS
3
4
5
7
9
11
14
18
20
26
28
30
35
36
37
38
40
42
43
FCC STATEMENT
SAFETY PRECAUTIONS
FEATURES
FRONT PANEL CONTROLS AND INDICATORS
REMOTE CONTROL OPERATION
QUICK START
SYSTEM SETTINGS
PLAYBACK OF AUDIO FILES
EQUALIZER CONTROLS MENU
iPod®/iPhone® CONTROLS
AV-In1/AV-In2 CONTROLS
STEERING WHEEL CONTROL (SWC) OPERATION
REAR CAMERA OPERATION
TROUBLESHOOTING
SPECIFICATIONS
CARE AND MAINTENANCE
NOTES
VX3012 COMMON REPLACEMENT PARTS (Back Cover)
Thank you for choosing a Jensen product. We hope you will find the
instructions in this owner’s manual clear and easy to follow. If you take
a few minutes to look through it, you’ll learn how to use all the features
of your new Jensen VX3012 Mobile Multimedia Receiver for
maximum enjoyment.
iPod® Control “iPod” is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
VX3012
BT / HANDS FREE CALLING
AM-FM RADIO

3
VX3012
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference in a
residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 centimeters between the radiator and your body.
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory (This head unit) has
been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod or iPhone may
affect mobile phone performance.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

4
VX3012
Never expose this unit, amplifier and speakers
to moisture or water to prevent electric sparks
or fire.
Please don't change the fuse on the power cord
without professional guidance, using an
improper fuse may cause damage to this
unit or even cause fire.
Please contact your nearest dealer if one of the
following symptoms is experienced:
(a). Water or other objects enter the unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power supply
with negative grounding.
Never install this unit where the operation &
condition for safe driving is impaired.
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the risk of
traffic accident except for using rear view
video camera.
Please read through these operating
instructions so you will know how to operate
your model properly. After you’ve finished
reading the instructions, keep this manual in a
safe place for future reference.
To ensure safe driving, please adjust the volume
to a safe and comfortable level in case of
emergency situations.
Safety Precautions
1.) Never disassemble or adjust the unit
without any professional guidance. For details,
please consult any professional car shop /
dealer for inquiry.
2.) If the front panel or TFT monitor is dirty,
please use a clean silicone cloth and neutral
detergent to wipe off the spot. Using a rough
cloth and non-neutral detergent such as
alcohol for cleaning may result in damage to
the monitor.
3.) If any abnormal behavior of the unit is
found, please refer to trouble shooting guide
of this manual. If no relevant information is
found, please press the [RESET] key on the
front panel to resume factory default.
4.) If you have parked the car in hot or cold
weather for a long time, please wait until the
temperature in the car becomes normal before
operating the unit.
5.) Using the car heater in low temperature
environment may result in moisture inside the
unit, DO NOT use the unit in this situation.
Eject the disc and wipe off the moisture on the
disc. If the unit still doesn't work after a few
hours, please contact the service center.
6.) Do not impact the LCD monitor which
could cause damage.
7.) To prevent damage to the screen, avoid
touching it with sharp objects.
8.) To provide a clear demonstration and
an alternative for easy understanding to the
operation of this unit, graphic illustrations are
used. However, some illustrations are different
from the actual images displayed on the
screen.
9.) Operate the unit correctly according to
this manual to prevent unnecessary problem.
The guarantee won't be valid if the problem is
caused by inappropriate operation.

5
VX3012
FEATURES
Please read the instruction manual for this product before using. The
documentation provided will allow the user to fully enjoy all the features of
your new Jensen VX3012 Mobile Multimedia Receiver. Please read all of the
instructions before beginning the installation and save this manual for
future reference. We recommend having your Jensen VX3012 installed by a
reputable installation shop.
DVD
• Audio Equalizer
• Next Chapter and Previous Chapter
• Play/Pause
• Track Direct Entry
• Disc Menu
• Selection Repeat / Track Repeat
• Disc Audio
• Disc Language
• Pic Control
CD / MP3 / WMA
• CD-Text Compatible
•ID3 Tag Compatible
• Directory Search (MP3 / WMA Only)
• Audible Forward / Reverse Track Search
• Random, Repeat and Intro
• Play, Pause, Stop, Next Track and Previous Track
AM-FM
• USA, Asia, Japan, Europe, Eur LW (Europe Long Wave), Oirt.
• 30 Station Presets (18 FM / 12 AM)
• Auto Stereo / Mono
• Local / Distance
• Auto Store
iPod®/iPhone®
• iPod®/ iPhone® via USB
• High Speed Direct Connect Interface to Access iPod® Playlists, Artists, Albums
and Songs.
• Power Management Charges iPod®/ iPhone® while Connected

6
Chassis
• 1.0 DIN (Import / ISO-DIN Mountable)
• Motorized Front Panel
•7” High Definition TFT LCD
• Resolution: 800h x 480v x RGB WVGA
•Beep Tone Confirmation
General
• Built-In BT providing Hands-Free operation for safety and convenience
and A2DP for streaming music from your smartphone.
• One Composite Video Output for Additional Screens
• Front Panel Audio/Video Input
• 3 Band Parametric Equalizer - Bass, Mid-Range and Treble
• Rear Panel Audio/Video RCA Input
• Front, Rear and Sub RCA Line Output - 2VRMS
• Rear Camera Input
• Touch Screen Calibration Mode
• Rotary Encoder Audio Control
REAR CAMERA
The VX3012 is “camera ready.” Before accessing any camera features, you
must purchase and install a rear video camera.
VX3012
•USB Charging Current - 2.1 Amp Support

7
VX3012
Figure 1. VX3012 Controls and Indicators
FRONT PANEL CONTROLS AND INDICATORS
Notice:
The graphic in this manual is for reference only, and may be different
from the actual unit. Reference to actual unit is suggested.

8
1.) SRC Button ( ) Power ON/OFF, and Source Menu: Press the button to
turn the unit ON. Once the unit is ON, momentarily pressing the [SRC] button will
display the Main Source Menu. Press and hold the button for 2 seconds to turn the
unit OFF.
2.) ROTARY ENCODER Knob: Rotate the knob to adjust the volume from 0 to 50.
Pressing the knob momentarily will mute and un-mute the audio. Press and hold
the knob for 2 seconds to turn the unit OFF.
3.) REVERSE [ ] Button: Press [ ] to Seek backward. In Radio mode,
Press [ ] to Seek a previous station.
4.) FORWARD [ ] Button: Press [ ] to Seek forward. In Radio
mode, Press [ ] to Seek the next station.
5.) IR REMOTE SENSOR: Used to receive command signals from the remote
control.
6.) USB/AV Connector COVER: Covers the USB/AV interface connector.
7.) RESET Button: Press this button to reset the system settings (except
password and parental lock settings) and to correct a system halt or other illegal
operation. Use the tip of a pen to press the Reset button.
8.) A/V INPUT: Attach compatible A/V devices.
9.) TFT MONITOR [OPEN/CLOSE] Button: Press to open the TFT monitor
into viewing position. Press again to close the TFT. With the monitor open,
press and hold to enter TFT Angle setting mode. Rotate the volume knob to
adjust to the desired angle. Press and hold after adjustment, to save TFT
position or let the feature time-out after 4 seconds.
10.) [ DISP ] Button: With the monitor open, during DVD playback, press once to
view Time, Title, Chapter info or twice for Audio, Subtitle, Angle, and Bit Rate info.
With the monitor closed, press to view alternate LCD display information.
11.) EJECT [ ] Button: Press this button to eject a DVD/CD/MP3 disc. Disc play is
stopped, the disc is ejected and the unit will change to radio operation. If the disc
is not removed from the unit and the button is pressed again, the disc will be
re-loaded. If the disc is not removed from the disc slot within 10 seconds of
being ejected, it will be automatically reloaded to prevent it from being
accidentally damaged.
12.) DISC SLOT: Accepts DVD/CD/MP3 discs. If the unit is turned on, playback
begins when a disc is inserted.
VX3012

9
VX3012
Remote Control Function Description
1. Button: Press this button to switch between and select
available sources. (Radio/Disc/BT/USB/BT Audio/SWC/AUX-1/AUX-2/
Camera)
2. EJECT Button ( ): Press this button to eject a DVD/CD/MP3 disc. Disc play is
stopped, the disc is ejected and the unit will change to radio operation. If the
disc is not removed from the unit and the button is pressed again, the disc will
be re-loaded. If the disc is not removed from the disc slot within 10 seconds
of being ejected, it will be automatically reloaded to prevent it from being
accidentally damaged.
3. AUDIO Button: Press to display and select the audio language in DVD mode.
Each time the button is pressed, the language changes. NOTE: The languages
for audio vary from disc to disc.
4. VOLUME Button and Press these buttons to increase or decrease
the playback volume.
5. BAND Button: Press this button to scroll though preset stations or when in
disc mode, this button is used for Fast playback / Slow playback. Press this
button to answer an incoming BT phone call.
6. REPEAT (RPT) Button: Repeat playback
7. MUTE Button: Press this button to turn the audio output ON and OFF.
8. POWER Button ( ): Press this button to turn the unit ON and OFF.
9. SUBTITLE Button: Press to display and select the subtitle language in DVD
mode. Each time the button is pressed, the subtitle language changes.
NOTE: The type and number of languages for subtitles vary from disc to
disc.
10. MENU Button: Press this button to access the root menu of a DVD or CD
during playback. The disc will return to normal playback and the root menu
will disappear if no selection is made within 10 seconds.
11. FAST FORWARD [ ] Button: Press this button to forward Disc play 2x, 4x, 8x
or 20x normal speed. Press this button while in Radio mode to search available
radio station by increasing tuning frequency.

10
VX3012
12. NEXT (uul) Button: Press this button to skip to the next chapter, track or
song during playback of a disc. Press this button while in Radio mode to
search available radio station by increasing tuning frequency.
13. PLAY / PAUSE ( ) Button: Press this button to pause the playback of a
disc. Press this button again to resume normal playback.
14. PREVIOUS (ltt) Button: Press this button to go back to the previous
chapter, track or song during playback of a disc. Press this button while in
Radio mode to search available radio station by increasing tuning frequency.
15. FAST REVERSE [ ] Button: Press this button to reverse Disc play 2x, 4x, 8x
or 20x normal speed. Press this button while in Radio mode to search available
radio station by decreasing tuning frequency.
16. NUMBER Buttons (1-6): Press these buttons to directly access chapters and
tracks, Radio presets, etc.
17. RANDOM (RDM) Button: Press this button to play tracks or chapters in
random order while playing a disc.
NOTES ON REMOTE CONTROL USAGE
• Aim the remote control at the TFT/screen.
•Remove the battery from the remote control or insert a battery insulator if
the remote control will not be used for a month or longer.
•DO NOT store the remote control in direct sunlight or in a high
temperature environment, or it may not function properly.
•The battery will last for 6 months under normal condition. If the remote
control does not work, please change the battery.
• Use lithium battery type CR2025 (3V) only.
• DO NOT recharge, disassemble, heat or expose the battery in fi e.
• Insert the battery in the proper direction according to the ( + ) and ( - ) polarity
marks.
•Store the battery in a place where children cannot reach it to avoid the risk
of an accident.

11
QUICK START GUIDE
Turning the Unit ON or OFF
Press the front panel Power/Menu button [ / SRC ] to turn the unit ON. To turn
the unit OFF, press and hold the front panel Power/Menu button [ / SRC ] for
2 seconds.
Selecting an Audio/Video Source, BT or Backup
Camera
To access an Audio/Video source:
1. Momentarily press the front panel Power/Menu button or touch the Menu
icon located in the upper left corner of the display to view the Main Menu
Screen.
2. Touch the desired source icon on one of the two main menu screens.
Screen 1 of 2: Radio, Disc, BT, USB.
Touch page arrow (-->) at the bottom of the screen to access Screen 2 of 2:
BT (Audio), Steering Wheel Control (SWC), AV-IN1, AV-IN2, or Camera.
Figure 4. VX3012 Main Menu Screen
Screen 1 Screen 2
MENU
Button
VX3012

12
VX3012
Mute
Press the volume knob on the front panel or press the [MUTE] Button on the
remote control to mute the volume from the unit.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches "0" or "50", a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone can be
disabled through the Setup menu.
Using the TFT Monitor
Open / Close Monitor
Press the [OPEN] Button on the front panel or remote control to open or close
the TFT display panel. NOTE: Never pull or push on the TFT display panel.
Change the Monitor Tilt Angle
Due to the inherent character of an LCD, you will get different vision
impressions when you view it from different angles. The display angle of
this unit can be changed; hence you can select the best angle where you
can get the best vision impression. Press and hold the [OPEN] button (>1
second) to enter TFT Angle Setting Mode, and rotate the volume knob to adjust.
Press and hold the [OPEN] button again to exit the TFT Angle Setting or let the
feature time out after 5 seconds.
NOTE: Never pull or push on the TFT display panel.
[RESET] Button
Resetting the System
Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen
to press and release the Reset Button located just below the front panel rotary
encoder (volume) knob.
Figure 5. System Reset Button
For a Hard Reset - Go to "Settings" > DVD tab > Load Factory > Reset. After a "System
Reset", the unit will restore all default settings.

13
1. Enter image setting mode by pressing the [PIC] Button on the remote control.
2. Select the item to be adjusted and touch the Left or Right direction icons
[ ]/[ ] on the user interface to adjust the value.
3. To exit image setting mode, press the [PIC] Button on the remote control again
or simply stop making adjustments.
Equalizer Controls
Equalizer (EQ): Adjustment can be made after entering one of
the audio/video sources (Disc, Radio, USB, AV-IN1, or AV-IN2)
Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a
desired audio preset level ( Pop / Techno / Rock / Classic / Jazz / Optimal or User),
make adjustments to the audio Balance and Fade levels or to turn the Loudness
option ON or OFF. Touch the return icon to return to the current source.
Playing a Disc
To begin playback of an Audio/Video Disc:
1. Press the front panel Power/Volume/Mute control knob to turn the unit ON.
2. Insert a disc with the label side facing UP and playback will begin
automatically.
Parking Brake Inhibit
When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the
front TFT monitor will display video when the Parking Brake is engaged.
Figure 6. Image Settings Screen
Change Aspect Ratio (DVD / AV In Sources Only)
Press the [WIDE] button on the remote control to adjust the aspect ratio.
Image Settings (DVD / AV In Sources Only)
VX3012

14
VX3012
SYSTEM SETTINGS
1. Touch the Menu icon located in the upper left corner of the display to display
the main menu.
2. Touch the Settings icon [ ] and the settings menu is displayed.
General Settings
1. Touch [ General ], if necessary.
2. Touch to highlight a setting to display/select an option.
General settings Options Description
Radio region USA/Asia/Japan/Europe/Eur LW/
Oirt Select one that matches your location.
Radio range
Local Select Local to receive only stations with extremely
strong signal.
Distance
Beep
On Turn-ON the beep sound. Each time you press a button,
the unit beeps.
O Turn-OFF the beep sound.
Calibration Start Calibrate the touch screen.
Demo
On Turn-ON Retail Demo Mode.
O Turn-OFF Retail Demo Mode
4. Touch Menu icon located in the upper left corner of the display to exit.
Figure 7. Settings Menu Screen

15
Calibration
Calibrate the touch screen using the calibration setting function.
Recalibrating the touch screen:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Yes ] to enter.
3. Press and hold the center of [ + ] for 5 seconds, the [ + ] will move automatically.
4.
Video Settings
1. Touch [Video].
2. Touch an option repeatedly to select.
Video settings Options Description
Aspect Ratio
Full
Adjust aspect ratio.
Normal
Rear Camera
Mirror
Reverse the camera image as if looking through a rear-view mirror.
Normal
3. Touch the return icon to exit and return to the previous screen.
Figure 8. Calibration Screen
Aim at center of [ + ], follow the path as shown in the figu e. Once steps 1-4 are
complete the system will automatically exit calibrating mode.
VX3012

16
VX3012
Time Settings
1. Touch [ Time ].
2. Touch an option repeatedly to select:
Sound settings Options Description
Date Year / Mon / Day Touch [ ] or [ ] to set year, month and day.
Clock mode 12Hr/24Hr Touch [12Hr] or [24Hr] to switch clock mode.
Time Hour / Min / AM /
PM
Touch [ ] or [ ] to set hour and minutes.
Touch [ ] or [ ] to set AM/PM (only for 12Hr).
3. Touch the return icon to exit and return to the previous screen.
Audio Settings
1. Touch [ Audio ].
2. Touch an option repeatedly to select.
Audio settings Options Description
Subwoofer
ON Turn-ON the subwoofer.
OFF Turn-OFF the subwoofer
Subwoofer
filte
80Hz
Select a crossover frequency to set a cut-off frequency for the subwoofer’s
LPF (low-pass filter)
120Hz
160Hz
Loudness
Switch
OFF
Select low frequency boost only or high and low frequency boost.Lo Boost
Hi&Lo
Loudness
Center
400Hz
Select loudness center frequency.800Hz
2.4KHz
3. Touch the return icon to exit and return to the previous screen.
Language Settings
1. Touch [ Language ].
2. Touch an option repeatedly to select.
Language settings Description
OSD Select on-screen display language.
DVD audio Select DVD audio language. Options available depending on DVD disc.
DVD subtitle Select DVD subtitle language. Options available depending on DVD disc.
Disc menu Select DVD menu language. Options available depending on DVD disc.
3. Touch the return icon to exit and return to the previous screen.

17
BT Settings
1. Touch [BT].
2. Touch an option repeatedly to select.
BT Settings Options Description
BT
ON Turn-ON the BT function.
OFF Turn-OFF the BT function.
Auto connect
ON If the pre-paired device is within the eective range, the unit re-connects
to pre-paired device automatically.
OFF Need to re-connect manually.
Auto answer
ON Answer paired phone call automatically.
OFF Answer phone call manually.
Pairing code Set the password for pairing the unit.
3. Touch the return icon to exit and return to the previous screen.
DVD Rating
1. Touch [ DVD ].
2. Touch an option repeatedly to select.
DVD rating Options Description
Set password Set password to restrict the play of discs. The default password is 1234.
Rating level
Kid safe Acceptable for children.
G Acceptable for general viewers.
PG Parental guidance suggested.
PG-13 Unsuitable for children under age 13.
PG-R Recommend parents to restrict viewing for children under 17.
R Restricted re-parental guidance is advised for children under the age of 17.
NC-17 Unsuitable for children under age 17.
Adult Acceptable for adults only.
Load factory Restore to default settings.
Version Info The Version Sub-menu is used to identify the model and resident operation system as well as
the hardware and software versions.
3. Touch the return icon to exit and return to the previous screen.
Adjust Source Volumes (Relative Level)
You can set dierent relative volumes for dierent sources.
1. Touch the [Volume] icon to display and access the volume Setting Sub-Menu
2. Touch the source to be adjusted
3. Touch [ ] or [ ] to assign value: 0 to 12. Default is "6", which is 0dB. Setting "0" is
-6dB. Setting "12" is +6dB.
4. Touch the return icon to exit and return to the previous screen.
VX3012

18
VX3012
RADIO TUNER MODE
Select Radio as Playing Source
Open the SOURCE MENU and then touch [Radio].
Selecting a Radio Band
Press the [BAND] Button on the remote control or touch the [ ] icon on the user
interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.
Tuning AM-FM Stations
Seek Tuning
Press the [ ] / [ ] Buttons on the remote control or touch the [ ] / [ ]
icons on the user interface to Seek the next / previous radio station.
To stop searching, repeat the operation above or press other Buttons having
radio functions. NOTE: When a station is received, searching stops and the
station is played.
Manual Tuning
Method 1:
Press and hold the [ ] or [ ] icon for 1 second to enter Manual Tuning mode.
During manual tuning, the frequency will be changed in steps.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Method 2:
1. Touch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch
numbers to input frequency.
2. Touch [ ] to delete the input numbers step by step.
3. Touch [ OK ] to enter.
Preset Stations
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store
6 stations; hence the unit can store 30 stations in total.
Storing Radio Stations in Memory
1. Tune to a desired station.
2. Touch and hold one of the presets (1 to 6) to save the selected station.
Figure 9. Radio Screen

19
Auto Store (AS)
Touch the search icon [ ] to search radio stations and store the 6 strongest
stations in the current band automatically.
Recalling a Station
1. Select a band.
2. Touch an on-screen preset button to select the corresponding stored station.
Local (LOC) / Distance (DX) Settings
When the Local function is on, only radio stations with a strong local radio signal
are played. To activate the Local function in the AM/FM tuner mode, touch [ ] on
the screen. The Options tab is revealed. Touch [ ] icon and choose the Radio
Local or Distance. When the Local function is active, the LOC indicator at the top of
the screen is illuminated. When the Distant function is active, the DX indicator at
the top of the screen is illuminated.
EQ Selection
Touch the Equalizer [ ] icon and enter the EQ setup.
RDS
RDS( Radio Data System ) transmits data to the radio which displays
information such as station identification, song artist, and song title.
RDS service availability varies with areas/regions. If RDS service is not available
in your area, the following service will not be available.
Adjust RDS Settings
1. In Radio menu, touch [ ] and [ Option ].The option menu is displayed.
2. Touch on the selected option to change the setting.
∙[RDS]: To turn the “RDS” function ON or OFF.
∙[CT]: To turn on or off “Clock Time” synchronization function.
∙[PTY]: To show PTY list.
CT (Clock Time)
Some stations broadcast the time and date within the encoded RDS signal. The
clock time is automatically adjusted when ‘CT’ is set to ‘ON’.
Note: Stations broadcasting close to time zones may not broadcast the
correct time in your particular area. In this case, turn CT Off and manually set
the time.
PTY Function
PTY is the abbreviation for Program Type which is the function that displays the
program category of the current station such as category (news, sports, talk etc.)
Use the scroll bar to select various category codes.
Once a category code is selected the PTY options will display on the screen.
When one PTY option is touched (e.g. News), auto search for next available PTY by
increasing tuning frequency until the PTY of the next station matches the current.
If no matched PTY has been found, the unit will return to the original radio
frequency.
VX3012

20
VX3012
PLAYBACK OF AUDIO FILES
Compatible Audio Discs Types
This system will play the following types of discs:
• DVD - DVDs that contain audio and/or video.
•Audio discs - Audio CD's that contains audio files.
•MP3 discs - A disc that contains audio, video and image files (for example, a CD-R
with downloaded MP3 files).
NOTE: This unit is designed to play pre-recorded (original) CD/DVDs. Some
burned CD / DVDs may not play due to different recording formats.
DVD Operation
DVD Main Menu
NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to play
a DVD while the vehicle is moving, the TFT screen displays:
Warning!!!
It is illegal to view video
while driving or operating
a motor vehicle. Set parking
brake to view video.
From the Main Menu Screen touch the DISC Icon or insert a disc into the disc slot,
label side up. Playback begins when a disc is inserted correctly.
Insert a disc
Upon inserting a disc, the unit will switch to [DISP] mode automatically.
Eject the disc
Press the [ ] key on the front panel or remote control to eject the disc.
Touch screen controls
The touch key areas for DVD playback are outlined below:
A: Return to the main menu
B: Disc type
C: Time display
D: Play the video and display playback information
E: Display onscreen control menu
D
E
Figure 10. Screen Control Areas