Jetson JETKART 2.0 User manual

JetKart®2.0
Hoverboard Attachment
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODEL: JKAR20BK
Designed in Brooklyn

Jetson's top two riding rules:
Be safe. Have fun!

3
Safety Warnings
What’s in the Box
Product Specs
Attaching the Handles
Attaching the Seat
Assembling the Frame
Attaching the Wheel
Attaching the JetKart®2.0 to a Hoverboard
Adjusting Length
Getting on the JetKart®2.0
Helmet Safety
Riding the JetKart®2.0
Care & Maintenance
Warranty
Contents
..............................................................................................................4
.............................................................................................................6
................................................................................................................8
......................................................................................................9
..........................................................................................................11
.....................................................................................................13
.......................................................................................................16
.............................................................................17
...........................................................................................................22
...............................................................................................24
...............................................................................................................25
....................................................................................................26
.......................................................................................................30
.....................................................................................................................30

4
Safety Warnings
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the
safety instructions. The user will be responsible for any loss or damage caused by improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer: That
all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the
braking system is functioning properly; That any and all axle guards, chain guards, or other covers or guards supplied by
the manufacturer are in place and in serviceable condition; That tires are in good condition, inlated properly, and have
suicient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the
manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
• Warning against recharging non-rechargeable batteries.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive
train, while the motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 250 lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may
cause uncontrolled operator/passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking,
and visibility.
• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.
• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and
ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners
shall be encouraged to highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on
lexible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women;
Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or
physical conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to
recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.

5
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.
• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate
certiication, and any other equipment recommended by the manufacturer: Always wear protective equipment such as
helmet, knee pads, and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• The brake may become hot while operating, do not touch the brake with your bare skin.
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or
excessive application of the brake may result in injury or death.
• If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team.
• Replace worn or broken parts immediately.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and
operate all components of the unit before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or
turn abruptly.
• Recommended for indoor use.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the
Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION PRECAUTIONS
Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which
may cause injury to yourself or others nearby. Do not jump on or o the product, and do not jump while using it. Always keep
your feet firmly planted on the foot rest while in operation. Always check the battery charge before using.
CALIFORNIA PROPOSITION 65
WARNING:
This product can expose you to the chemical Cadmium which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information, go to www.P65warning.ca.gov.

6
* ADULTS MUST ASSIST CHILDREN IN THE ASSEMBLY AND INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
** HOVERBOARD NOT INCLUDED
What’s in the Box
1. REAR FRAME A
2. FRONT FRAME B
3. HANDLE ×2
4. SEAT
5. FOOT REST
6. WHEEL
7. VELCRO STRAP ×4, INCLUDING 2 SPARE
HARDWARE AND TOOLS:
WRENCHALLEN KEYS
×2, SMALL AND
LARGE
SMALL BOLTS,
& NUTS ×4
WASHERS
×4
LARGE BOLTS
& NUTS ×6
FRAME CLAMPS
×2

7
3 RIGHT 3 LEFT
4
1
2
6
5
7
NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

8
Product Specs
• WEIGHT LIMIT: 250 LBS
• PRODUCT WEIGHT: 16.3 LBS
• RECOMMENDED AGE: 12+
• WHEEL SIZE: 6”
• DIMENSIONS: 37” L × 17” W × 18” H

10
1. SLIDE LEFT HANDLE SUPPORT INTO THE LEFT SIDE OF THE
REAR FRAME A SO THAT THE HOLE IN THE FRAME AND
HANDLE SUPPORT ALIGN.
2. REPEAT WITH THE RIGHT HANDLE ON THE RIGHTHAND
SIDE OF THE REAR FRAME.
1.1 Attaching the Handles
1. Getting Started
REAR FRAME A HOLE
HOLE
LEFT HANDLE

11
3. INSERT A LARGE BOLT THROUGH THE TOP OF THE ALIGNED
HOLES ON ONE SIDE OF THE FRAME.
4. GENTLY TWIST A NUT ONTO THE END OF THE BOLT.
5. STABILIZE THE POSITION OF THE NUT WITH THE WRENCH AND
TIGHTEN THE BOLT INTO IT USING THE LARGE ALLEN KEY.
6. REPEAT ON THE OTHER SIDE WITH THE OTHER HANDLE.
7. MAKE SURE THAT BOLTS AND NUTS ARE TIGHT AND THE HANDLE
SUPPORTS ON BOTH SIDES ARE SECURED TO THE FRAME.
LARGE BOLT
LARGE NUT

12
1. ALIGN HOLES IN SEAT TO THE FOUR MATCHING HOLES ON
THE REAR FRAME A.
2. INSERT A SMALL BOLT THROUGH EACH SET OF ALIGNED HOLES.
3. GENTLY TWIST A SMALL NUT ONTO THE END OF EACH BOLT.
4. STABILIZE THE POSITION OF A NUT WITH THE WRENCH AND
TIGHTEN THE BOLT INTO IT USING THE SMALL ALLEN KEY.
5. REPEAT TO TIGHTEN THE OTHER THREE BOLTNUT COMBOS.
IMPORTANT: DO NOT OVER-TIGHTEN THE BOLTS.
OVER-TIGHTENING CAN CAUSE THE SEAT TO CRACK.
1.2 Attaching the Seat
SMALL NUT
REAR FRAME A
SMALL BOLT

13
5. MAKE SURE THE BOLTS AND NUTS ARE TIGHT AND THE SEAT IS SECURED TO THE FRAME.

14
1. ALIGN THE TUBES ON THE FRONT FRAME B
WITH THE TUBES ON THE REAR FRAME A.
BE SURE THAT THE RIGHT SIDE OF THE FRAME IS ON
TOP. IN CORRECT POSITION, THE JETSON LOGO WILL
BE UPRIGHT.
2. WHILE PUSHING IN THE PINS ON THE FRONT FRAME,
SLIDE THE FRONT FRAME TUBES INTO THE REAR
FRAME TUBES.
1.3 Assembling the Frame
PIN HOLE
FRONT FRAME B
REAR FRAME A
PIN

15
3. CONTINUE PUSHING IN THE FRONT FRAME
TUBES UNTIL THE PINS POP INTO PLACE IN THE
FIRST PIN HOLES ON THE REAR FRAME TUBES.
4. UNSCREW AND REMOVE THE KNOBS FROM EACH
FRAME CLAMP. SET ASIDE.
5. REMOVE ONE WHITE WASHER OFF OF EACH
FRAME CLAMP AND SET ASIDE WITH THE KNOBS.
LEAVE THE SILVER WASHER AND REMAINING
WHITE WASHER ON THE CLAMP STEM.
CLAMP KNOB
CLAMP STEM
WHITE PLASTIC
WASHERS

16
6. WORKING FROM THE OUTSIDE IN TOWARDS THE
CENTER, INSERT ONE CLAMP STEM WITH A
SILVER WASHER AND PLASTIC WHITE WASHER
STILL ON IT THROUGH THE TWO HOLES ON THE
UNDERSIDE OF ONE OF THE CLAMP BRACKETS.
7. SLIDE A WHITE WASHER ONTO THE END OF THE
CLAMP STEM SO THAT THE SMALLER SIDE OF
THE WASHER IS FACING IN.
8. HOLD A KNOB IN POSITION AT THE HOLE
FACING CLAMP STEM AND TWIST THE
LATCH CLOCKWISE INTO THE KNOB.
FRONT FRAME B
REAR FRAME A
WHITE PLASTIC
WASHERS
SILVER WASHER
CLAMP STEM
CLAMP KNOB
CLAMP LATCH

17
9. TIGHTEN THE KNOB AND CLOSE THE
CLAMP LATCH.
* IMPORTANT: DO NOT OVER-TIGHTEN
THE KNOB. OVER-TIGHTENING CAN
PREVENT THE LATCH FROM OPENING
AND CLOSING EASILY.
10. REPEAT STEPS 6  9 IN THE OTHER
BRACKET WITH THE OTHER CLAMP
COMPONENTS.
KNOBKNOB
CLAMP LATCH
CLAMP

18
1. TURN THE JETKART UPSIDEDOWN.
2. POSITION THE WHEEL BRACKET ON THE
FRONT OF THE FRAME SO THAT THE 4 HOLES
IN THE BRACKET ARE ALIGNED WITH THE 4
HOLES IN THE FRAME.
3. FROM THE UNDERSIDE, INSERT A LARGE
BOLT THROUGH EACH OF THE HOLES IN
THE FRAME AND UP THROUGH THE HOLES
IN THE WHEEL BRACKET.
4. SLIDE A WASHER AND THEN TWIST A LARGE
NUT CLOCKWISE ONTO THE END OF EACH BOLT.
5. TIGHTEN THE NUT USING THE WRENCH AND
LARGE ALLEN KEY.
6. FLIP THE JETKART OVER SO THAT IT IS
RESTING ON THE WHEEL AND HANDLE
BRACKETS.
1.4 Attaching the Wheel
WASHER
LARGE NUT
LARGE BOLT