funtec BEACH Champ Set User manual

USER MANUAL
ID: 111203
Beach volleyball posts
BEACH CHAMP

FUNTEC Sports GmbH | Loehestr. 25 | DE - 53773 Hennef | [phone] | [e-mail] www.funtec.de
General information
USER MANUAL FOR
BEACH VOLLEYBALL POSTS
BEACH CHAMP
Overview
Switch + City Beach -
removable sockets + freestanding Ground plates with Square timbers
Spare parts
City Beach -
for a freestanding installation with square timbers
Switch + concrete Foundation -
Removable sockets + Bolt-Down Ground plates
Overview: Floor mounting options
Bolt-down sockets
INDEX

FUNTEC Sports GmbH | Loehestr. 25 | DE - 53773 Hennef | [phone] | [e-mail] www.funtec.de
Security advice
- This product has been developed for use at competitions
and at top-class sports.
- This product must be used in accordance with its desig-
nated use which is Volleyball or similar sports.
- Before using this product make sure it has been installed
properly and all supports or fittings are firmly tightened.
- This product corresponds with DIN 33957:2012-04
and it has been developed in accordance with DIN EN
1271:2015-01.
- In case the posts have been removed from the sockets
please make sure to cover any remaining parts in a way
that players won‘t get injured.
Assembly instructions
- This product has to be assembled with due care by an
adult person. We recommend to call upon the help of a
second person.
- For this product a level ground is required with the dimen-
sions of at least 14 x 22 m (for the leisure sports) or 18 x
26 m (for competition sports).
- Depending on the way of floor mounting it is required
to create foundations according to instructions from this
manual.
- Please take no unneccessary risks while handling the
equipment and be careful when assembling this product.
Maintenance and care
- This product does not require regular maintenance work.
However, we recommend to check all components for da-
mages or deformation regularly. Any damaged parts should
be replaced as soon as possible.
- For cleaning please just use water (with a mild washing-
up liquid). Do not use corrosive, solvent or abrasive
cleaning products.
- The ideal storage location is dry with a temperature
between 10 and 25° C.
Please read carefully before assembly or use
and retain for future use
ID: 111203
General Information

4
Overview
ID: 111203
Beach volleyball
posts Beach Champ
Beach Champ net posts made from powdercoated
special aluminium profile (91 x 91 mm)
With single-arm suspension
allows easy mounting of tension cable
Rope pulley with triple block combination including
a stainless steel carabiner with wire gate (for one-
handed use)
Pulley block system is self-balancing
to pulling direction
For use with ground sockets
(produced in accordance with DIN 33957)
Tensioning counter slider with four vertical
pins, ideal for pre-tensioning or
differing cable lengths
Open tensioning console with horizontal pins for best
choice of net cord angle
Includes an additional clamcleat below for comfortable
fine adjustment of tensioning ropes
Tool-free use of locking lever for net
height adjustment, mounted to the
tensioning slider and framed by the post
shape

5
ID: 111203
Scope of delivery
Beach Volleyball posts
Beach Champ
Net post with
tackle tensioning slider
Net post with
tensioning counter slider
1x 1x

6
FOR ID: 111203
Floor mounting options
City Beach socket
Freestanding ground socket to be installed with
square timbers
Bolt-Down socket
Ground socket with bolt-down base for installation on
a concrete foundation
Switch Socket
+ Ground plate City Beach
Removable socket + Freestanding
ground plate with square timbers
Switch Socket
+ Bolt-Down Ground plate
Removable socket +
Bolt-down ground plate for installation on a
concrete foundation
10
14
16

7
General information on building a Beach Volleyball court with City Beach sockets:
When building a sand court we suggest to fill up the sand first of all. Afterwards you can just dig in the City Beach ground
sockets and set up the net system.
We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the
centres of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to
create a minimum sand level of 35 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a
sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 - depending on the grain size and
the sand quality).
Minimum Sand level: 35 cm
Insert square timbers into T-base
Mark the outline of the square timbers Make excavations according to outlines
Secure with suitable screws
Set into position: ground sockets together with inserted square timbers
10 m (with a 8.5 m net)
11 m (with a 9.5 m net)
OPTION: CITY BEACH
Assembly
6x
Required for assembly:
Pressure-treated square timbers, 6 pieces, each 1500 x 88 x 88 mm (maximum dimensions: 1500 x 90 x 90 mm), suitable
for permanent ground contact

8
Fill up the excavation
(Be careful not to move the timbers when doing this!)
Step on the timbers to press them firmly into the sand
Align the sockets with each other - inserting the net poles
will be helpful
The sockets are designed with a 2° sloping angle to the
outwards.
Set ground sockets with timbers into excavation; be careful
not to step onto the borders of the excavation
OPTION: CITY BEACH
Assembly
2° 2°
Minimum: 35 cm

9
Square timber set
ID: 111232
Beach Volleyball socket City Beach,
ID: 111211
1x
2x
Pro Beach Courtline
ID: 111304
1x
Square-cut Beach Volley post pads (100 x 100 mm),
1 pair, ID: 111353
1x
Pro Beach net PLUS, incl. net antennas PLUS
(2-piece, with velcro strap pockets), ID: 111601
1x
ACCESSORIES (SOLD SEPARATELY)
Option:
City BEach

10
Beach Volleyball socket Switch,
removable, ID: 111210
2x
2x
Switch ground plate with T-base, incl. sand protection frame
and a 3-piece steel cover lid, ID: 111220
REQUIRED ACCESSORIES (SOLD SEPARATELY)
Option:
Switch + City BEach

11
General information on building a Beach Volleyball court with City Beach ground plates:
When building a sand court we suggest to fill up the sand first of all. Afterwards you can just dig in the City Beach ground
sockets and set up the net system.
We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the
centres of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to
create a minimum sand level of 40 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a
sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 - depending on the grain size and
the sand quality).
Minimum Sand level: 40 cm
Insert square timbers into T-base
Mark the outline of the square timbers Make excavations according to outlines
Secure with suitable screws
Set into position: ground sockets together with inserted square timbers
10 m (with a 8.5 m net)
11 m (with a 9.5 m net)
OPTION: SWITCH + CITY BEACH
Assembly
6x
Required for assembly:
Pressure-treated square timbers, 6 pieces, each 1500 x 88 x 88 mm (maximum dimensions: 1500 x 90 x 90 mm), suitable
for permanent ground contact

12
Fill up the excavation
(Be careful not to move the timbers when doing this!)
Step on the timbers to press them firmly into the sand
Align the sockets with each other - inserting the net poles
will be helpful
The sockets are designed with a 2° sloping angle to the
outwards
Set ground sockets with timbers into excavation; be careful
not to step onto the borders of the excavation
OPTION: SWITCH + CITY BEACH
Assembly
2° 2°
Minimum: 40 cm

13
Pro Beach Courtline
ID: 111304
1x
Square-cut Beach Volley post pads (100 x 100 mm),
1 pair, ID: 111353
1x
Pro Beach net PLUS, incl. net antennas PLUS
(2-piece, with velcro strap pockets), ID: 111601
1x
ACCESSORIES (SOLD SEPARATELY)
Option:
Switch + City BEach
Square timber set
ID: 111232
1x

14
OPTION: CONCRETE FOUNDATION
Assembly
The sockets are designed with a 2° sloping angle to the
outwards
General information on building a Beach Volleyball court with bolt-down socket:
We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the
centres of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to
create a minimum sand level of 35 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a
sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 - depending on the grain size and
the sand quality).
2° 2°
10 m (with a 8.5 m net)
11 m (with a 9.5 m net)
Create foundations with a closed surface,
Distance (clear span between sockets): 10 m with a 8.5 m net, 11 m with a 9.5 m net
Description
Foundation, Dimensions: 80 x 80 x 80 cm, class C25/30, built-in welded wire fabric (Q188A)
Ground socket, bolted down on the concrete foundation
Distance (clear span): 10 m (with a 8.5 m net), 11 m (with a 9.5 m net)
Sand (minimum sand level: check red marking)
Drainage matting/geomembrane
Drainage/base layer, 50 cm approx.
Soil
Screw down the sockets onto the foundation
Required for installation:
e.g. ground anchor with mortar cartridge
MKT V-A 16-20/165 A4 with MKT V-P 16
or equal
8x
Minimum sand level: 35 cm

15
Steel ground anchor, with mortar
cartridge, ID: 111213
Socket with bolt-down base
ID: 111212
2x
Pro Beach Courtline
ID: 111304
1x
Square-cut Beach Volley post pads (100 x 100 mm),
1 pair, ID: 111353
1x
Pro Beach net PLUS, incl. net antennas PLUS
(2-piece, with velcro strap pockets), ID: 111601
1x
ACCESSORIES (SOLD SEPARATELY)
Option:
Concrete Foundation
8x

16
Beach Volleyball socket Switch,
removable, ID: 111210
2x
2x
Switch bolt-down ground plate, incl. sand protection frame
and a 3-piece steel cover lid, ID: 111219
REQUIRED ACCESSORIES (SOLD SEPARATELY)
Option:
Switch + Concrete Foundation

17
OPTION: CONCRETE FOUNDATION
Assembly
Close safety trap and install lid cover
Create foundations with a closed surface,
Distance (clear span between sockets): 10 m with a 8.5 m net, 11 m with a 9.5 m net
Minimum Sand level: 30 cm
Disctance and orientation of ground plates
10 m (with a 8.5 m net)
11 m (with a 9.5 m net)
Innenseite/
INSIDE
Screw down the ground plates onto the foundation
Required for installation:
e.g. ground anchor with mortar cartridge
MKT V-A 16-20/165 A4 with MKT V-P 16
or equal
8x
The sockets are designed with a 2° sloping angle to the outwards
2° 2°
Description
Foundation, Dimensions: 80 x 80 x 80 cm, class C25/30, built-in welded wire fabric (Q188A)
Ground socket, bolted down on the concrete foundation
Distance (clear span): 10 m (with a 8.5 m net), 11 m (with a 9.5 m net)
Sand (minimum sand level: check red marking)
Drainage matting/geomembrane
Drainage/base layer, 50 cm approx.
Soil

18
Pro Beach Courtline
ID: 111304
1x
Square-cut Beach Volley post pads (100 x 100 mm),
1 pair, ID: 111353
1x
Pro Beach net PLUS, incl. net antennas PLUS
(2-piece, with velcro strap pockets), ID: 111601
1x
REQUIRED ACCESSORIES (SOLD SEPARATELY)
Option:
Switch + Concrete Foundation
Steel ground anchor, with mortar
cartridge, ID: 111213
8x

19
SPARE PARTS
Beach volleyball
posts Beach Champ
No. Description ID
1 Tackle tensioning slider for Beach Champ posts 203-200
2 Elastic cord, 8 mm diameter, colour: red 206-215
3 Top-block with stainless steel carabiner 206-217
4 Tackle tensioning cord, made from Polyester 206-218
5 Tensioning counter slider for Beach Champ posts 203-300

www.funtec.de