JieYou 3862WH User manual

Automotive Navigation System
User’s Manual
Please read user manual carefully before installation

1
Contents
Standard accessories---------------------------------------------------------2
Quick guide for touch operation--------------------------------------------3
Desktop widget set-----------------------------------------------------------4
Settings------------------------------------------------------------------------5
Application installation-----------------------------------------------------12
Introductions to common applications------------------------------------12
Function introduction
Radio-------------------------------------------------------------------14
Bluetooth---------------------------------------------------------------16
Driving record---------------------------------------------------------17
Music-------------------------------------------------------------------18
Images------------------------------------------------------------------19
IPOD--------------------------------------------------------------------20
Troubleshooting--------------------------------------------------------------21
Technical parameters--------------------------------------------------------22
Attached diagram------Connection diagram of power cord and AV cables

2
Standard accessories
1、Power cord
2、Navigation antenna
3、User’s Manual
4、Mounting bracket (not required for special machine)

3
Quick guide for touch operation
In the main interface, you may touch the icon to view all applications;
click on the icon of any application and keep about 3 seconds, then you
can drag the application icon to the main screen interface.
No matter which interfaces is displayed on the screen, you’re allowed to
click the button at the top left corner of the screen and return to the
main interface.
When operating, click on the button located at top right corner of
the touch screen, and then you may return to the previous screen interface.
Long press button on the status bar, you can turn off the display.
Press the button on the status bar, you can eject the disc.
Press and hold to drag the desktop icon to the left, you can see other desktop
icon.

4
Desktop widget set
：End of the process and free up memory. ：Volume adjustment.
：Brightness adjustment. ：EQ，Call up the audio / sound field interface.
Desktop clock widget will become the music player after playing the music
and pressing the Home key to return to the home page; press the Home key to return
home in the radio interface, and the clock widget will become the radio controller,
allowing for channel selections.

5
Settings
Wi-Fi
WiFi connection: Click the SET button and enter the wi-fi setup; drag the "OFF"
button to turn on the wireless network, and all available wireless networks will then
appear, then click your wireless network for connection. In case the wireless
network requires no password, click on the "Connect" and begin to connect; if the
wireless network requires a password, please enter a password first, and then click
"Connect" to start the connection. If the wireless network has been successfully
connected before, the information will then be stored and will automatically
connect. After the successful connection of machine, the status bar at the top of
screen will show a wireless network icon .
3G network connection: Plug USB-3G device, open wifi and access to the internet
via 3G network after appearing of wifi icon on the main interface after waiting for
15sec.
Portable hotspot: When 3G network connection is OK, open the "Portable Wi-Fi
Hotspot" and you can set the network SSID, security and password in "Set Wi-Fi
hotspots", and save it after setting completion. Other wireless devices also can
connect to the network via machine's Wi-Fi hotspots at this time.

6
Sound
For volume adjustment, you can also use tick to select or cancel the keypad
tones.
Display
LCD brightness, wallpaper,.
Screenshots set
Set the screenshot image storage location, select the delay time to capture the

7
screen, then switch to the desired captured interface, and the image will then be
automatically captured after the end of the countdown time.
Storage
To see the available storage space, you may clear the memory card (formatting
the internal memory), and select the option of media scan to an external memory
card or an external USB device.
[Notes]:
1. "Preferred install location" can be set either on a SD card or inside the
device memory just based on your software installed.
2. If you want to remove TF card or USB flash drive, click on the option
"Uninstall TF card" and confirm your selection, then you’re allowed to
remove the TF card / USB host device in a safe manner.
Application
Management of applications. Click the catalog (already downloaded, SD card,
under running or all), and select the application you want to uninstall, you will

8
then enter the following interface, click “Uninstall”, and then you can remove the
application from the system.
Security
Display the password, device manager, unknown source, trust certificates, and
installation from SD card.
Language & input method
Allowing for language selection, text input and auto-error correction options.
Select your favorite keyboard and input method, and set the text-to-language
output, pointer speed.
Backup &Reset

9
Allowing for data backup or reset, and the factory settings restore
Warning: Once you perform a "restore factory settings", it will erase all
personal data on the machine, so you are required to make backup to all
your personal data before executing this function.
Date & time
You may use the GPS to automatically update the time or just use the time or
time zone provided by the networks; manually set the date and time, select the
time zone; you can also choose the display format of the time and date.
Accessibility
Intercom system offers voice feedback to assist with the blind and visually
impaired users. You need to download the application from the Android app
store.
Here you can also set the system and select the options such as voice password,
touch screen latency and installation of webpage scripts.

10
GPS
GPS Application Selection: Select the navigation software you intend to use.
GPS listening, GPS status, location information access permission.
GPS sound mode selection: "Switch" and "Mix" option.
GPS mix ratio: adjust the mix ratio of the size, you can map the voice increases.
Element settings
Panel buttons light colors are available, with nine kinds of color modes optional.
Can also customize any color adjustment.

11
Driving settings
Video settings, reversing X-mirror, reversing volume, rear view ruler.
Amplifier settings
Loudness switch: When you open the audio low frequency boost.
Sound settings: Settings of treble, middle, bass, loudness, mega bass outputs are
allowed.
Sound effect may be preset as jazz, pop, rock, classical, straight, vocal or user
mode.
Sound field selectable front left, front right, rear left, rear right speaker single
sound.
[Note]: The changed parameters are automatically saved in the "User" mode.
Learning steering wheel control
Enter into "steering wheel control keys", please press your original vehicle
button, like "VOL+", then the screen displays keys interface (see the picture

12
below ), click screen button , then press "Apply". Finally click original car
keys function buttons, choose the relative functional buttons on the screen. After
completed study, please click "Save" on the right corner. Press those buttons on
the steering wheel, you can then able to control a host. Repeat the same steps for
other buttons.
[Note]: If the settings are incorrect, click the RESET button to clear the learn key
functions, and start to re-learn.
Application installation
You may download the application from the Android app store, and then install it
online, or install applications from your TF card or USB device. The installation
can be done by only clicking the application, and you can run the application
immediately after installation. You may also install the application you want with
"APK installer."
Introductions to common applications
Browser
After the machine is connected with the wireless network, click on the Browser
icon on the desktop and you can open your web browser

13
Then you’re allowed to browse the webpage. You can get more options by
clicking the menu icon on the top right of the screen:
Refresh: Refresh the web page
Bookmark: View bookmarks, websites you browsed the most frequently as
well as the browsing history
Others: More options, such as "Save to bookmarks", "Share webpage", "Search
on the web", "Request desktop website", "No sleep when browsing", "Save for
offline reading", "Settings".
File Manager
Click the File Manager icon to browse the files saved in the storage device
(Flash, SD card or USB drive). You may also view the file in a classified manner.

14
Click on the appropriate storage device (Flash、SD、GPS or USB drive) to view
the files inside. Select a file or folder (file or folder after tick), then copy
the key and paste the key, cut keys, between each storage device
can copy, move, paste files or folders. By delete key can delete a file or
folder.
How to copy a file: Select the file or folder (file or folder after tick), click on the
Copy button, then open your storage device to be stored (Flash,, SD, GPS or
USB) or folder, click on the Paste button can be copy your files into that folder.
Function introduction
Radio function operation
：Automatic station search, which can be stopped when click it again.
：Press this button to switch to the stereo and mono.
：Conversion between Remote and Proximity
：AM radio

15
：FM radio
：Press this button when the RDS is started to open or close the replace
substitute frequency function. If the current radio station has a frequency table,
it will automatically jump to frequency with good signal when the original
signal is weak.
：Press this button when the RDS is started to automatically search traffic
bulletin information. If there’s traffic bulletin information provided currently,
it will automatically skip to the radio station for playback.
：Press this button to set the type of program you want to listen, an automatic
search will be performed after selection.
：Semi-automatic station search up short press; long press the up tuning
frequency.
：Press down semi-automatic station search; long press trimming down
frequency.
Special operation tips:
1、Drag to the left column to store the radio, you can view the search to other
stations.
2、If there is no radio station stored you want, you may manually tune to the
frequency point you desired and hold down the radio station stored, and then you
can save the desired station in such point.

16
Bluetooth operation
After entering the Bluetooth interface, click on the search button to search for
Bluetooth devices of your phone (Bluetooth mobile phone settings "detectability" To
open); after selecting your Bluetooth device on your phone, click the button
for pairing connection. Bluetooth connection can be disconnected by clicking the
button.
：Dial pad. Click the button during a call to convert the other person's
voice from the speaker to the phone, or from the phone to the speaker.
：Phone book. After entering the phone book, you need to click the
button at the right of the screen to download contacts and phone numbers.
：Call history. Select a record in the call history and then click the
button to delete such record.
：connection settings
：You can change the Bluetooth device name, pin cord, auto answer and

17
auto-connection.
After the Bluetooth of mobile phone is connected to the machine, Click
desktop "A2DP" icon,; click the icons , and for
PREV/NEXT, PLAY/PASUE.
Special operation tips:
1、Press the to delete a number when dialing the numeric keys.
2、Phone numbers within the call history area can be slide up and down and page up
and down by touching the screen.
3、Automatic paring with the phone is defaulted. When the system displays the
successful pairing is done, the phone starts to connect with the connection
password of "0000", and the Bluetooth function is available when the system
prompts the successful connection (Bluetooth symbol in the upper right corner of
the screen changes from gray to white). (Note: For detailed operation of phones,
please refer to the operating instructions section of the Bluetooth in such mobile
phone)
Car record operation
：Start recording. Background operation can be carried out after the starting of
the recording, and the recording will be automatically saved after stopping the

18
video recording.
：List of recorded videos. The left space of playback and video recording
interface will show the time, longitude, latitude and driving speed.
[Note]: You can set the DVR recorder video storage location in extra settings,because
video files in DVR recorder are much bigger, using the SD card or USB
flash drive of 8GB or larger is suggested, so the driving video time
automatically saved will be longer.
Music playback operation
：Conversion key of sound effects
：
PREV， Press this button during playback and you will then choose to play the
previous song.
：Play/pause，Press this button during playback to convert between the play /
pause functions.
：NEXT，Press this button during playback and choose to play the next song.
：Add music in the playlist.

19
：Audio Wave/lyrics/Artist information conversion.
：Press this button to select the random play, single repeat, recycled playback
and orderly play of music in SD / USB.
Special operation tips:
1、Press and hold the screen to drag to the left, brings up the playlist.
2、Press and hold the screen to the right to add music brings up a list.
Picture play operation
：Slideshow.
：Add pictures from SD/USB.