JIEYUN TECHNOLOGY J60 User manual

J60 Thin Client
User Guide
Version 1.7
ShenZhen JIEYUN Technology Co., Ltd. （www.jieyung.com）
Updated at 2014-06-28

Copyright @ 2013 JIEYUN Technology Co., Ltd. All rights reserved.
Please do not copy, extract or publish any content of this document without the owner’s permission.
The copy rights of the third party logo mentioned in this document belong to their owners.
Formatting Conventions：
【ＸＸＸ】—— Menu or Button
〈ＸＸＸ〉—— Window or Display UI
—— Warning

Page 3 of 25
Contents
1INTRODUCTION ......................................................................................................................................................... 4
2INTERFACES AND MOUNTING OPTIONS............................................................................................................ 4
3SPECIFICATIONS....................................................................................................................................................... 5
4CONNECTION DIAGRAM.......................................................................................................................................... 6
5SYSTEM GUIDE.......................................................................................................................................................... 6
5.1 BOOT SCREEN....................................................................................................................................................... 6
5.2 NETWORK INITIALIZATION....................................................................................................................................... 7
5.3 AUTO CONNECTING................................................................................................................................................ 7
5.4 CONTROL CENTRE ................................................................................................................................................. 8
5.5 CONNECTION SETTINGS......................................................................................................................................... 9
5.6 ADD DESKPOOL CONNECTION............................................................................................................................. 11
5.7 ADD MICROSOFT RDP CONNECTION................................................................................................................. 11
5.8 ADD SPICE CONNECTION................................................................................................................................... 13
5.9 ADD OVIRT CONNECTION..................................................................................................................................... 14
5.10 DISPLAY PROPERTIES.......................................................................................................................................... 15
5.11 NETWORK SETTINGS............................................................................................................................................ 16
5.12 NETWORK DIAGNOSIS.......................................................................................................................................... 18
5.13 SYSTEM ................................................................................................................................................................ 18
6RESTORE FACTORY DEFAULT SETTINGS ...................................................................................................... 23
7FAQ.............................................................................................................................................................................. 23
7.1 HOW TO RESTORE DEFAULT RESOLUTION?......................................................................................................... 23
7.2 HOW TO FIX RDP FAILURE................................................................................................................................... 24
7.3 HOW TO RESOLVE THE AUDIO PROBLEM WITH GOOGLE CHROME BROWSER?.................................................... 24

Page 4 of 25
1 Introduction
J60 thin client is based-on ARM cortex A9 4-cores 1.6GHz CPU and 1GB DDR3
memory. In additional, it is powered by deeply-optimized linux OS. The main features
include：
Up to 1080p resolution and 32bpp color depth.
Small and exquisite without fan.
Very low power consumption.
Support multiple enhanced protocols, such as RDP, RemoteFX and SPICE.
Support smoothly on-line video.
Support high-definition video file play with redirection plugin.
Easy firmware upgrade.
Support USB redirection.
2 Interfaces and mounting options
FIG.2-1 Interfaces
FIG.2-2 Mounting Options

Page 5 of 25
3 Specifications
System
Description
CPU
ARM Cortex A9 1.6GHz, 4 Cores
Memory
DDR3：1GB
Flash
NAND Flash：8GB
Network
10/100M based-T RJ45 ethernet port
WiFi (Optional)
WIFI 802.11B/G/N (optional)
Audio Input
MIC input, 3.5mm mini jack
Audio Output
Audio output, 3.5mm mini jack
USB
4x USB ports
Debug Port
Mini USB port for debug
VGA
Up to 1920 x 1080，60Hz, 32bpp color depth
HDMI
Up to 1920 x 1080，60Hz, 32bpp color depth
Power Input
DC, 5V, 2000mA
Power Switch
Light push power switch
Power Adapter
Input: AC, 100-240V, 50/60Hz
Output: DC, 5V, 2000mA
Lock Slot
Kensington lock slot
Size
Height: 29.5mm, Width: 150mm, Depth: 115 mm
Power Consumption
< 7W
Cooling
None fan
Noise
0db
Temperature range
0~45 °C
Humidity
20 % to 80 % condensing
10% to 95% non-condensing
Feet
Feet for vertical use
Bracket
VESA standard mounting

Page 6 of 25
4 Connection Diagram
FIG.4-1 Connecting J60 thin client to a remote desktop server
Notice, please make sure to use the matched power adapter, any mismatching
maybe destroy the device. And if the monitor provides a HDMI or DVI interface, the HDMI
cable or HDMI to DVI converter could take the place of VGA cable.
5 System Guide
Please install the J60 thin client device as FIG.4-1 shows.
5.1 Boot Screen
FIG.5-1 Boot Screen
When the thin client power on, monitor will display the boot screen as FIG.5-1 shows,
there is a progress bar under the logo stands for the boot status. While success boot, the
device goes to “Network Initialization”phase.

Page 7 of 25
Note, If the monitor cannot support the device’s resolution output, it maybe display a
black screen, please refer to the chapter 7 to restore the default resolution setting.
5.2 Network Initialization
At the network initialization phase, show as FIG.5-2, the device will check the local
network connection and the IP settings. After the successful network initialization, the device
goes to auto connecting phase.
FIG.5-2 Network Initialization
Note, if fail to initialize the network, please check the following possible reason:
1) No available cable connection.
2) If the device is set to use dynamic IP address and fail to acquire IP settings from
DHCP server, please check the DHCP services.
5.3 Auto Connecting
If there is none automatic connection setting, the device will skip the auto connecting
phase. Otherwise, the device starts the auto connecting after 5 seconds countdown. You
can cancel the auto connect with 【Cancel】button or “Esc”key, show as FIG.5-3a and
FIG.5-3b.
FIG.5-3a 5-second Countdown

Page 8 of 25
FIG.5-3b Starting Auto Connecting
When the auto connecting is failed, the device will retry after 15-second countdown,
unless you cancel it, show as FIG.5-3c.
FIG.5-3c Auto Connecting Retry
5.4 Control Centre
As FIG.5-4a shows, administrator password should be provided before enter the control
centre.
FIG.5-4a Login to Control Centre
Note, If there is none administrator password setting, the device will skip FIG.5-4a
dialog and enter control centre directly. Please refer to chapter 5.12 to set administrator
password.

Page 9 of 25
FIG.5-4b Control Centre
As FIG.5-4b shows, control centre is divided into three function zones:
Main Menu List
Setting Window
Status Bar
Main menu include the following menus:
Connection Settings: Management the remote desktop connections
Display Properties：Resolution and language settings
Network Settings：Network parameters
Network Diagnosis：Diagnose the network with ping
System：Show the system information and system level functions
5.5 Connection Settings
Click 【Connection Settings】menu, enter the connection setting window shown as
FIG.5-5a, the table surrounded by red dotted line is connection record table.

Page 10 of 25
FIG.5-5a Connection Settings Window
Connection Type
J60 thin client supports three kinds of connection and two kinds of desktop protocol:
Deskpool Connection: Deskpool login-in connection configuration, adopt
Microsoft RDP client with RemoteFX graphic feature enabled.
Microsoft RDP Connection：Microsoft remote desktop server accessing
configuration，adopt Microsoft RDP client with RemoteFX graphic feature
enabled.
SPICE Connection：Remote SPICE server connection configuration, make
use of RedHat SPICE protocol.
oVirt Connection：oVirt VDI accessing configuration.
Notice, the web portal would act as an entry of a remote desktop system instead of
a standard web browser.
Connection List
The connection table includes the following items：
Name：Connection name.
Type：Deskpool、Microsoft RDP or SPICE.
Server Address：Remote desktop server address.
Auto Connect：Enable or disable the auto connecting setting.
Actions：【Connect】, 【Edit】, 【Delete】operation buttons