Jinruitai Electronics JT2678 User manual

WATERPROOF BLUETOOTH SPEAKER USER MANUAL
Manufacturer: Shenzhen Jinruitai Electronics Company Limited
Model: JT2678
Thank you for choosing our Waterproof Bluetooth shower speaker. Sincerely
hope you will enjoy your music and phone call freely.
Safety Instructions
Read this manual carefully before you use our waterproof Bluetooth speaker
and keep this manual for future reference.
Keep the device away from heat, direct sunlight and sharp edges.
Keep the device away from naked flames.
Do not insert any metal objects into the device in case of short circuit!
To avoid a static charge, please do not use the device in an extremely dry
climate.
Do not repair the unit by yourself but contact an authorized specialist to help
you.
Accessories included
1pc USB charging cable
Charging Integrated Battery
This Bluetooth speaker is powered support by integrated rechargeable Lithium
Battery. Charge the battery as follows:
Insert the charging cable into the DC 5V socket on the unit. Connect the USB
plug into a PC or AC/DC adapter. The LED indicator turns red and the battery
is being charged.
When the battery is fully charged, the red LED indicator goes out.
Pairing BT06 to Mobile phone or other device
Active the Bluetooth speaker pairing mode by button and then there has a voice
reminder says: Enter to Bluetooth. the blue LED is flashing ,means the speaker
is ready for pairing.
Switch off the mobile phone Bluetooth, the speaker will say: Bluetooth
canceled.
Tips:
Please make sure the speaker is in power off mode when you are trying to
activate the pairing mode.
Turn on your mobile Phone and activate the Bluetooth function.
Search for Bluetooth devices, BT06 will show up.
Pair your device with BT06. If password is needed, type in “0000”,after BT06
is paired with your device, voice reminder says; Bluetooth connected, means

the speaker had connected with your device.
Tips:
Once this speaker is paired and connected to your mobile phone, next time
when you switch on this speaker, it will connect to your mobile phone
automatically as long as the Bluetooth in your mobile phone is on.
Button description
On/Off : To switch on or off the device
Short press for the previous song, long press for turning down the
volume.
Short press for the next song, long press for turning up the volume.
Phone: To pick up or hang up a phone call.
Play/pause the music
. RESET button: Press the button heavily to reset the speaker
Notes & tips:
You can press Phone Button twice quickly to redial the last phone No. Call.
Long press the Phone answering Button 3 seconds, disconnected from the
connection between phone and Bluetooth speaker
Troubleshooting:
Symptoms Causes Solutions
Can not switch the
speaker on Battery empty Charge the battery
Unable to pair the speaker
Speaker is already
switched on, and it is not
in pairing mode
Refer to he section of
“Pairing 2681 to mobile
phone or other device”
during working no sound
suddenly Battery out of charge Charge the battery
Buttons can not work or
strange sound occured
suddenly
Product need to be reset Press the RESET button

Technical Specifications
Bluetooth support: V2.1+EDR
MaximumRFRange: 10meters
Transmitting frequency: 2.4G
Power supply: DC 5 V/300-400mA
Battery: 3 .7V 400mA lithium
Charging time: Approx. 3 hours
Operating time: Approx.6 hours
IPgrade: IPX4
Unit weight: Approx. 95.5g

FCC WARNING
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.