
ThePacificEvolutionDFS-20SurroundLoudspeaker
Connectthecabletothespeaker.Thespeakershouldideallybesited600mm-1.5metresabovethe
listeningpositionand2.5-3.5metresapart,centraltothelistenerandbehindthelisteningposition,
preferablyonarearwall.
Ensurethatthewall issoundand cansupportthe product.Drilltwo 5mmholesin thewall 160mm
apart and horizontally aligned. Fix a suitable No 8 round head screw firmly into each hole using
appropriatewallplugs. Leaveastubof5mmprotrudingfromthewall.Aligntheholesinthemounting
bracketsoverthescrewheadsandcarefullylowertheunitontothescrews.Thespeakershouldnowbe
securelyattachedwiththespacersrestingagainstthewall.Nowconnectthespeakerstotheamplifier.
Note:Forthoseunabletowallmount theDFS-20,youshouldconsiderusing asuitablepairoffloor
standsofappropriateheight.Consultyourdealerforadvice.
Ifthelisteningpositionissomedistancefromarearwall,theloudspeakers
maybemountedonoppositesidewallsbutalwaysbehindthelisteningposition.
channelsarereproducedatequalloudness.
FrontandEffectsChannels Onsomeprogrammematerialthesurroundchannelmayseem
lower than the front. Do not readjust this level. You may,
however, need to adjust the subwoofer output level. Avoid
settingtoohighaleveloryouwillswampthesoundwithbass
whichbetiringtolistentoandmaylimitthesubwoofer’sability
to respond to large bass transients. You should also set a
sensiblelevelgoingintothesubwooferfromtheAVprocessor.
DelaySettings
ManyAVprocessorsfeaturedelaysettings.Thepurposeofdelay
istoenablesurroundanddialogueinformationtoarriveatthe
listener’s ears at the same time as the Front channels, even
whenthelisteningseatisinanon-idealposition.
Rear Delay: If the listening position is equidistant from the
FrontandRearspeakers,alowdelaysettingshouldbeset.The
closerthelisteneristotheRearspeakersthehighershouldbe
thedelaysettingused,
Centre Delay: If the Centre speaker is level with (or slightly
behind)theFrontspeakers,setthedelaytozero.Ifthe Centre
speakerisforwardoftheFrontspeakers,increasethedelay.
LFE
InthecinematheLowFrequencyEffectschannelisanextrabass
channel with its own subwoofer and not a regular subwoofer
channel. In domestic systems the LFE channel typically feeds
intothesubwoofer.Wherenosubwooferisused,theLFEsignal
iscombinedwithFrontChannelinformation.Whenyousetthe
SettingLoudspeakerSizes LFE level at your AV processor, use care as the powerful low
Many digital AV Processors require you to specify the size of frequenciescanoverloaddomesticloudspeakers.
speakers inallchannels.Theseareusually‘Large’or‘Small’. Ifyouhearpoppingorthumpingnoisescomingfromthefront
Always choose 'Small' for the Surround channels and Centre loudspeakersorsubwoofer,immediatelyturntheAVProcessor's
channelwhetheryouareusingasubwooferornot. volumeleveldownandthenbackofftheLFElevel.Thisshould
curetheproblem.Ifitdoesnot,backoffthevolumelevelatthe
Ifyouarenotusingasubwoofer:SettheFrontSpeakersto subwoofer(ifyouareusingone)untiltheproblemdisappears.
‘Large’.Setthe‘Subwoofer’option ontheprocessorto 'Off'or
‘No'. TheFrontchannelswillnowreceiveallthesystembass. Pleasereadthe relevantsections ofyour AVamplifier manual
and familiarise yourself with the various issues. If you are
If you are using a subwoofer: When set to ‘Small’ all the unsure,consultyourdealerforhelp.
systembasswill gointo the subwoofer.If youchoose ‘Large’
the Front channel bass will be reproduced from the Front Phase
speakers. Bookshelf speakers should be set to ‘Small’, large A Home Theatre system should have a precise front stage, a
floorstandingunits maybesetto‘Large’. diffuse rear stage and good localisation of dialogue. If the
SettingLevels colours on the loudspeaker terminals do not correspond with
thoseontheamplifier,thesoundwillappearpoorlyfocussedor
Oncetheloudspeakersettingshavebeenfinalised,puttheAV ‘out ofphase’.For thisreason itisessential thatthespeakers
amplifier into its “Test” mode (see instructions supplied with areconnectedaccordingtothewiringdiagramsinthismanual.
yourprocessor). Adjustthelevelofeachchannelinturnuntilall
Thefrontloudspeakersareplacedoneithersideofthetelevision
screen, 2 to 3 metres apart. The speakers should be angled
slightlysotheyareaimedtowardsthelisteners.
As the rear surround channels are the ‘effects’ channels the
reproduced sound should be as room filling as possible. We
recommendplacingthespeakersinahighposition,behindthe
listener’sheadandangledtowardsthelistener.Iftherearwall
ismorethan1metrebehindthelisteningseat,positiontheunits
onthesidewalls.Ifthewallsarealongwayfromthelistening
seat,considerstandmountingtheloudspeakers.
Most of the dialogue comes from the centre loudspeaker.
Speech should appear to originate from the actors’ mouths.
Operating height is important. Ideally the front and centre
channelspeakersshouldbeatthesameheight.Forthisreason
the centre channel speaker is best operated on top of the
television monitor. The front faces of the centre and surround
loudspeakersshouldalsobeinlineasfaraspossible.
Subwoofer
Astheearis unabletodetectthedirectionfromwhichdeepbass
originates,thisallows youfreedom toposition theunit. Varying
thedistancefromthewallaltersthebass.Placingthesubwoofer
acrossacornerbooststhebassbutmayimpairclarity.
The performance of Home Theatre systems can often be
enhancedbyusingapairofsubwoofers.