JMB GSCDB2001 User manual

CD BOOMBOX
Instruction Manual
Model Number: GSCDB2001
Please read these instructions carefully and keep for future reference
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-1
WARNING
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING : SHOCK HAZARD-DO NOT OPEN
LIGHTNING FLASH WITH ARROWHEAD SYMBOL -
within an equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous
voltage within the products enclosure that may be of
sufficient magnitud e to constitude a risk of electric
shock to persons.
EXCLAMATION POINT - within an equilateral triangle,
is used to indicate that a specific component shall be
replaced only by the componen t specified in that
documentation for safety reason.
The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:
CLASS 1 LASER PRODUCT
KLASS 1 LASER APPARAT
LUOKE N 1 LAISERLAIT E
KLASSE 1 LASER PRODUKT
CLASS 1 LASER PRODUCT LABEL -
This label is attached to the place as illustrated to inform that the
apparatus contains a laser component.
WARNING
LABEL INFORMING OF RADIATION -
This label is p l a c e d insi d e t h e uni t . A s sho w n in t h e illus t r a t ion. T o
warn against further
measures on the unit. The equipment contains
a laser radiating laser rays according to the limit of laser product of
class 1.
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-2
SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating instructions should be followed.
5. WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl,
kitchen sink, laundrytub, swimming pool or in a wet basement.
6. VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper
ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-
in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances
(including amplifiers) that produce heat.
8. POWER SOURCE - The appliance should be connected to power suppl y only of the type describe d in the
operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them.
10. POWER LINES - An outdoor antenna should be located away from power lines.
11. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into
the enclosure through openings.
12. ESD WARNING - The display does not function properly or no reaction to operation of any the control may due
to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
13. SERVICING - The appliance should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c. The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
14. SERVICING - The user should not attempt to service the appliance beyond that described in the user operating
instructions. All other servicing should be referred to qualified service personnel.
Notes:
a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconncet the AC cord and remove all the batteries. Then turn the power
back on.
c. The mains plug must not be obstructed and should remain readily accessible during intended use.
BEFORE OPERATION
Notes: CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items:
a. Usable compact discs. Use only compact disc with the mark shown below.
b. CD compact disc only with digital audio signals.
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-3
POWER SOURCES
AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC inlet at
the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance
matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance.
Notes:
Should it become necessary to replace the fuse in the plug, a fuse of the same value conforming
to the BS 1362 standard should be used .
BATTERY POWER
Remove the battery compartmen t cover by sliding it in the direction of the arrows.
Insert 6 x “C” size batteries into the battery compartment . Be sure that the batteries are inserted
correctly to avoid damage to the appliance. Always remove the batteries when appliance will not be
used for a long period of time, as this will cause leakage to the batteries and subsequently damage
to your set.
Notes:
- Use batteries of the same type. Never use different types of batteries together.
- To use the appliance with batteries, disconnect the AC power cord from it.
Specifications:
Power supply: AC 220-240V~50Hz
Power consumption: 12W
to AC INto a wall outlet
Insert 6 x “C” size batteries
into the battery compartment
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-4
LOCATION OF CONTROL
DIAL POINTER
SKIP +
POWER INDICATOR
STOP
PLAY / PAUSE
CD DOOR
FM ANTENNA
FUNCTION
SELECTOR
VOLUME
CONTROL
OPEN / CLOSE
LED DISPLAY
FM STEREO INDICATOR
TUNING CONTROL
BAND SELECTOR
PROGRAM
REPEAT
SKIP-
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-5
RADIO OPERATION
GENERAL OPERATION
1. Set the “FUNCTION” selector to “RADIO” mode.
2. Select desired band by using the “BAND” selector.
3. Adjust radio frequency to your desired station by using the “TUNING” control.
4. Adjust the “VOLUME” control to the desired level.
AM / FM / FM-STEREO RECEPTION
- Set the “BAND” selector to AM / FM mode for MONO reception.
- Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up
to show FM ST. mode.
FOR BETTER RECEPTION
- Reorient the antenna for better reception.
- Reorient the appliance to get better AM reception.
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-6
CD OPERATION
GENERAL OPERATION
PLAY / PAUSE Press to start playing CD disc.
Press again to stop playing CD operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the sound.
STOP Press to stop all CD operation.
PLAYBACK
1. Set the “FUNCTION” selector to “CD” mode.
2. Open the CD door and place a CD disc with the label up in the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside. Total number of tracks is read and appears on the display.
5. Press the “PLAY / PAUSE” button to start playing CD disc.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8. Press the “STOP” button when finished.
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-7
CD OPERATION
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button.
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed. Press the “PLAY / PAUSE” button to play the
disc in the order you have programmed and the program indicator flashes.
6. Press the “STOP” button twice to terminate programmed play and the program indicator will turn off.
REPEAT
Press the “REPEAT” button before or during playing CD, a single track or all the tracks can be repeated.
Each press switches the repeat mode as follows:
1 - REPEAT 1 ( The repeat indicator is flashing. )
2 - REPEAT ALL ( The repeat indicator is steadily on. )
3 - NORMAL PLAYBACK
REPEAT 1 REPEAT ALL NORMAL
PLAYBACK
RANDOM
1. Press the “RANDOM” button during playing CD, it will select and play a track randomly.
2. Press the “STOP” button to terminate random mode.
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

E-8
SPECIFICATIONS
Supply Voltage:…………..220V – 240V ~ 50Hz
Frequency range……….. 87.5-108MHz (FM)
540-1600kHz (AM)
Net Weight:………………..1.8 kg
Power Consumption : 12 Watts
Power Output per Channel: 1 Watts (RMS)
Total Power Output : 2 x 1 Watts(RMS)
For Customer Services & Spare Parts please call 01204 664 084
Opening times: Monday – Friday 9am until 5pm

Guarantee
This product is guaranteed for 12 months from the date of original purchase.
If any defect arises due to faulty materials or workmanship, the unit will, either
be repaired, replaced or refunded at our discretion.
The following conditions apply:
●
●
●
●
●
●
●
The product must be returned to the retailer with original proof of
purchase.
The product must be installed and used in accordance with the
instructions contained in this user instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable parts.
The supplier has no responsibility for incidental or consequential loss or
damage.
Valid in the UK & Eire only.
Valid only if purchased from the SDHS Group
Postal Address:
Shop Direct Group
L70 1AB
Box MPRC8

For Customer Services & Spare Parts
please call 01204 664 084
Opening times: Monday – Friday
9am until 5pm
Revision 1
T his symbol is known as t he ' Crossed-ou t wheelie bin S ymbol '. W h en t his symbol is
marked on a produc t/ ba tt eries , i t means t ha t t he produc t/ ba tt eries should no t be disposed
o f wi t h your general household was t e . O nly discard elec t rical / elec t ronic / ba tt ery i t ems in
separa t e collec t ion schemes , which ca t er f or t he recovery and recycling o f ma t erials
con t ained wi t hin . Y our co-opera t ion is vi t al t o make sure t he success o f t hese schemes
and f oR t he pro t ec t ion o f t he environmen t. F or your neares t disposal f acili t y , visi t
www . recycle-more . co . uk or ask in s t ore f or de t ails .
W e reserve t he righ t due t o possible changes t o design t o al t er t he ins t ruc t ion manual
wi t hou t prior no t ice .