JML BeautyTrimmer Instruction Manual

• Before using the Beauty Trimmer, please
ensure you have read the instruction manual
carefully.
• Store in a dry place and out of the reach of
children.
• Always make sure children cannot reach the
appliance or any of the attachments.
• Do not immerse the main unit in water or
any liquid.
• Make sure attachments are completely dry
before attaching to the main unit.
• Make sure the unit is OFF when changing
attachments.
• Make sure the unit is OFF when changing
the battery.
• Make sure the unit is OFF when cleaning.
• Only turn the unit on when trimming,
the unit should be switched OFF
when combing.
• Be careful not to over trim.
• Use caution when trimming near the eyes.
• Do not use on eyelashes.
• For external use only.
• Use the appliance for its intended use only.
• Please keep these instructions, the sales
receipt, and if possible, the packaging.
• For dry use only - do not use any shaving
foam etc.
• Do not immerse in water.
Important Safety Instructions Using your Beauty Trimmer
• Always take care to t your batteries
correctly, observing the plus and minus
marks of the battery and product.
• Always store unused batteries in their
packaging and away from metal objects
that may cause a short circuit.
• Remove dead batteries from product
and remove batteries if you will not be
using for some time.
• Always make sure battery
compartments are secure.
• Never dispose of batteries in re –
there is a risk of the batteries exploding.
• Never attempt to recharge normal batteries.
• Never allow children to play with batteries.
Battery safety
• Ensure the unit is turned OFF.
• Remove the cap.
• Slide the casing off the main unit.
• Align the negative and positive signs in the
battery compartment with those on the battery.
• When the battery is clipped into place,
replace the casing.
To insert the battery
• Turn the unit on by pushing the ON/OFF
switch upwards.
• Place the head directly against the hair to
be removed.
• Move against the direction of hair growth.
Hair removal with the main head
For all designated areas of the body
WARNING: The Beauty Trimmer will not work if the
battery is inserted incorrectly
• Ensure the unit is turned OFF.
• Hold the neck of the main unit.
• Push the large opening on the
shaper down over the main head,
and click into place.
• It is recommended that, for trimming,
the long side is tested rst, if this side
is not satisfactory, use the short side.
Attaching the Eyebrow Shaper
• Attach the eyebrow shaper as described above.
• Turn the unit on by pushing the ON/OFF
switch upwards.
• Comb, following the natural shape of
the eyebrow, from the widest end to the
thinnest end.
• Repeat as necessary for thicker eyebrows.
Trimming with the Eyebrow Shaper
Gently trim unwanted hair: eyebrows, bikini area,
chin, feet, hands, nose, ears and other facial areas.
• Ensure the unit is OFF.
• Attach the shaper as detailed above, the
short side is recommended for grooming.
• Keeping the unit switched off, comb,
following the natural shape of the eyebrow,
from the widest end to the thinnest.
Grooming with the Eyebrow Shaper
Comb eyebrows, nape of neck, and sideburns.


Battery
Compartment
Battery
ON
Slide Aluminum Casing
ON
Neck
Main
Head

John Mills Limited
JML House
Regis Road
London NW5 3EG
Tel: [phone]
Fax: [phone]
www.jmldirect.com
If you have any queries about this product or would like
further information about JML products please call us at:
Care and Maintenance of your
Beauty Trimmer
• Ensure the unit is OFF.
• Remove the eyebrow shaper from the main
unit and use the cleaning brush to wipe
away hairs from the teeth.
• Wash with soapy water if necessary.
• Ensure the eyebrow shaper is completely dry
before reattaching to the main unit.
Cleaning the Eyebrow Shaper
• Ensure the unit is OFF.
• Use the cleaning brush provided to wipe
away any hair.
To clean the Main Head:
• Ensure the unit is OFF.
• On the back of the unit push
the lock down to unlock the main head.
• Pull the side of the head
down and off of the main head.
• Remove hairs with the cleaning
brush provided.
• Fit the head back onto the unit by
carefully sliding the piece upwards,
so that the groove ts to the protruding
section on the main unit, and then clip
into place.
• Note: Do not force into place.
• Secure by sliding the lock upwards until it
locks the main head
in place.
To clean inside the Main Head
ON
Lock
Inside
Main Unit
Head
Protruding
Edge

 
BeautyTRIMMER
Delicate hair trimmer and
precision eyebrow styler
Beauty Trimmer Instruction
and Safety Manual
Included
1. Eyebrow Shaper/Trim Guard
2. Powerful Advanced Micro Motor
3. Cleaning Brush
4. Velour Case
5. 1 x AAA 1.5V Battery