
5
For transport and storage:
• Always allow the device to cool completely before transport and storage.
• Always transport in the upright position.
• The glass panels must be removed from the drawer for transport.
• Do not store the oven outside or in an unprotected location. Protect the
device from moisture and rain. The maximum ambient temperature for
transport and storage is between -5 & 50°C.
During installation:
• Any damage to the device can endanger your safety. Before using check
the device for visible damage. Never operate a damaged device!
• For installation and operation of the device the original parts of the device
given by the manufacturer may be used. The use of other parts can cause
serious damage to people and/ or property.
• Makesuretheovenissetuponastableatsurface.
• When setting up and using the oven, make sure you do not have any
ammableobjectsanywherenear.
• The mains power must be switched OFF during installation.
• The electrical safety of the Tyboon Speed Oven is only guaranteed if it is
connected to a properly installed protective conductor system.
Danger from electric current during installation and when
connecting to the mains.
Protective devices must not be removed, disabled or tampered
with! Opening the case cover of the oven poses a risk of electric
shock and burns. Opening the case will void any warranty! The
manufacturer will accept no liability for accidents, personal
injury and/or property damage. Work on the device may only
be carried out by specialist personnel’s authorised by the
manufacturer.
Improper maintenance or repairs can result in serious hazards to
the user or damage to the grill. Maintenance work or repairs may
only be carried out by specialists authorized by JM Posner. If this
is not done then the warranty will not be valid.
The oven is intended for food only. Do not use the device with any
other items. Ensure that you remove any residual detergent after
cleaning before using.