JOCCA 9625 User manual

9625_INSTRUCTIONA MANUAL
HAIR CLIPPER
PURCHASE ACKNOWLEDGEMENT
JOCCA thanks you for the trust placed in the purchase of our product and we are certain that
you will always be satisfied with any of our products.
PRODUCT DESCRIPTION
a- Pouch
b- Comb
c- Scissors
d- Comb guides
d1- mm comb guide
d2- 6mm comb guide
d - 9mm comb guide
d4- 12mm comb guide
e- Cover to protect the blades
f- Hair clips
g- Oil to lubricate blades
h- Brush to clean the blades
i- Blades
j- On / Off switch
k- Cutting guide
l- Hanging ring
m- Wire and plug
SAFETY WARNINGS
-These instructions are very important. Please read this instruction manual carefully before
using the appliance and keep it at hand to refer to it at any time.
-JOCCA declines any responsibility for the improper use of the product, or any other use that is
not described in this manual.
-Before using the product for the first time, unpack the product and check that it is in perfect
conditions. If not, do not use the appliance and contact JOCCA, as the guarantee covers any
damage from origin or manufacturing defects.
-This product is only indicated for domestic use. Do not use the appliance outdoors. Never leave
the appliance exposed to climatic agents such as rain, snow, sun, etc.…
-This appliance is intended to be used only by adults. Do not allow people not accustomed to
this kind of appliances, handicapped people or children to use this item.
-If you need to put down the appliance whilst using the same, please do this on a stable,
horizontal and flat surface able to resist high temperatures.
-Before connecting the appliance to the mains, check that the cable and plug are in perfect
conditions.
-If your appliance has been dropped or fallen into water or any other liquid do not use it or try
to repair it. Take it to the JOCCA technical service.
-If you detect that the power supply cable or the plug are damaged, do not use the appliance
or try to replace the cable yourself. Go directly to the authorised JOCCA technical service
where they will replace it correctly for you.
-Do not immerse the appliance or any part of it in water or any other liquid.
-Do not pull the cable to unplug the appliance from the mains, always pull from the plug.
-For your safety and for the appliance to work correctly, always use JOCCA spare parts and
accessories.
- Please do not use the appliance with wet hands or feet or barefoot.
-Please do not use the appliance in the bath or shower or in steamy rooms or near water.
-Please do not wind the cable around the appliance, or let it come into contact with the hot
surfaces of the appliance.

-Please unplug the appliance from the mains electricity supply when not in use, before cleaning,
Please take it to the JOCCA technical servicing department if it does not work properly.
-Never leave the hair clipper unattended.
-Never touch the cutting areas nor put these areas in contact with your skin as they are sharp.
-Never use the comb guides if they are damaged, broken or the comb teeth are damaged as
this may be harmful.
-Do not use the hair clipper in the event of skin rash.
-If you wish to cut your pet’s hair take into account that this hair clipper is only designed for
clipping and tidying hair.
-Do not use the water to clean a device
INSTRUCTIONS FOR USE-
-Before using it, make sure the hair clipper is in perfect use conditions.
-To work more comfortably and to avoid a contact of the hair rests with clothes, put a towel or
a cape on the shoulders of a person you wish to cut the hair.
-Comb the hair to proceed to cutting, using the comb provided with a device. Then choose a
cutting head you want to use and put it into a cutting guide, fitting first a front part and
following pressing a back part till a sound of click that notifies of a proper placing.
-This case consists of 4 heads for different cutting: 1mm, 2mm, mm and 4mm.
-Once you have chosen and placed a head you want to use, plug in a device and slip a switch
to a position On (switch on), a device will start to operate. Then slide a device over the hair.
When you have finished cutting the hair, place a switch to a position Off (switch off) and
unplug it.
How to use the cutting guide.
The cutting guide is used when the hair to be cut is long and thick.
It will make the cutting process easier; and for this please follow the steps below:
-If the hair is very thick and this is long, place the cutting guide in its highest position, moving
the blades to a closer position and therefore making the cutting process easier.
-If the hair thickness and length is normal, place the cutting guide in its lowest position, making
the blades separate.
The cutting guide can be adjusted to the position you desire in order to make the cutting
process more comfortable.
CLEANING AND STORAGE
-Unplug the hair clipper before cleaning it.
-Do not use alcohol, acetone, petrol or abrasive cleaning agents to clean the plastic parts.
-Clean the hair clipper every time it is used to prevent the accumulation of grease and other
remains.
-Clean the external surface of the hair clipper using a slightly wet cloth first and then a dry
cloth.
-Never submerge the hair clipper in water.
-Store the hair clipper in a dry place once it has cooled down and do not roll the cable around
it.
TECHNICAL SPECIFICATIONS
2 0V ~50Hz 7W
This device conforms to the safety requirements and provisions of directives 2006/95/CE on
Low tension devices and 2004/108/CE on Electromagnetic Compatibility.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC
This product has been designed and manufactured with high quality materials and components
that can be recycled and reused.
-When you see the symbol of a crossed out litter bin on wheels next to a product, this means
that the product conforms to the European Directive 2002/96/EC.

Please obtain information about the local recycling system for electric and electronic products.
Follow the local rules and do not dispose of used products by throwing them in the normal bins
at home. Proper recycling of your used product will help avoid negative impacts on the
environment and people’s health.