JONATHAN Y JYL3089 User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X J Screw 1X
B Sheet iron 1X K Screw 1X
C Lamp body 3X L Big spanner 1X
D Lamp body 1 1X M Nut 2X
E Lamp body 2 2X N Small spammer 1X
FLamp
Body(bend) 1X O Glass shade 1X
GAdjustable
turning 1X P Out Ring 1X
HSocket 1X Q Bulb 1X
I Gasket 1X
Model# JYL3089/JYL3090
Product Dimensions: 46x13.75x71"
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

Step 1 Step 2
Make sure all parts could be aligned before assemble Put the shade(O) on the socket(H),then Put the light on a level surface to check
Unpack all parts from cartons carefully. tighten the out ring(P) on it. if everything is stable.
Insert the Lamp Body 1 (D) into the Lamp Body (C ),
Insert the bulb(Q) into the socket(H).
Insert the Lamp Body(C) into the Lamp Base (A)
through the Sheet iron(B), the Gasket(I) and Screw(J),
Fix the screw(K)on bottom of base(A)by using Big spanner(L).
Insert the Lamp Body(bend)(F) into the Lamp Body 2 (E ),
then fix the nut(M) on it by using the Small spanner(N).
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BOX