JONATHAN Y JYL5026A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL5026A
Product Dimensions: 14"L X 14"W X 31"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
Harp
1X
D
H
arp
1X
1/2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
2/2
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX ”
gg yp p p pp pg
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
THERE
IS
LED
9 WATT
BULB
IN
THE
BOX
11123 11123
Step 1 Step2 Step3
Insert the Har
p
(
D
)
into the Saddle
(
B
)
.Insert the bulb
(
G）into the socket
(
C
)
.Put the li
g
ht on a level surface to check
Insert
the
Harp
(D)
into
the
Saddle
(B).
Insert
the
bulb(
G
）
into
the
socket(C).
Put
the
light
on
a
level
surface
to
check
Put the shade(E) on the Harp(D), then if everything is stable.
tighten the Finial (F)into the Harp (D)
ENJOY YOUR LAMP
ENJOY
YOUR
LAMP
2/2