JONATHAN Y JYL6102A User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Model# JYL6102A
Product Dimensions: 12.5"Lx10"Wx 59.5"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock this plug will fit in a polarized outlet only one way if the plug does not fit fully in
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
the
risk
of
electric
shock
.
this
plug
will
fit
in
a
polarized
outlet
only
one
way
.
if
the
plug
does
not
fit
fully
in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Bulb 1X
F Flat washer 1X
G Tooth washer 1X
B lamp body 1X
C Shade 1X H Hexagon Nut 1X
D Ring 1X I Wrench 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
E ti t d A bl Ti 15 i t
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Put the shade(C ) onto the socket and Put the light on a level surface to check
screw the Lamp body (B2) onto the Lamp body(B1); fix it by ring(D) if everything is stable.
screw the Lamp base(A)onto the Lamp body(B2); Insert the bulb(E)into the socket
screw the Flat washer(F)onto the Lamp base;
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
screw
th
e
Fl
a
t
was
h
er
(F)
on
t
o
th
e
L
amp
b
ase;
screw the Tooth washer(G)onto the Flat washer ;
screw the Hexagon nut(H)onto the Tooth washer(G)with wrench(I)and tighten securely;
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1
2
C
D
E
A
B
3
F
G
H
I
A
B2
B1
1