JONATHAN Y JYL9052A User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Model# JYL9052A
Product Dimensions: Ø22 X 52"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
for
safe
use
and
installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet reverse the plug if it still does not fit contact a qualified electrician Never use with an extension
th
e ou
tl
e
t
, reverse
th
e p
l
ug,
if
it
s
till
d
oes no
t
fit
, con
t
ac
t
a qua
lifi
e
d
e
l
ec
t
r
i
c
i
an.
N
ever use w
ith
an ex
t
ens
i
on
cord unless the plug can be fully inserted. do not attempt to disgard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
1X
Feather Shade
Holder
B
A
1
X
F3X
Tube
3X
GTube
C
D
Socket Ring
Socket assembl
y
1X
1X
I
1
X
Bulb
1X
Circle Base
H
D
y
EScrew 3X
I
1
X
Bulb

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes
PLEASUE USE TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE IS 1 X 9W LED BULB IN THE BOX.
Estimated
Assembly
Time:
6
minutes
.
1
2
3
I
C
2
A
D
C
A
A
B
D
F
H
G
C
I
A
C
A
B
D
F
H
G
C
I
A
C
Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Unscrew the Socket Ring(C) and Screw (E)from Place the Feather Shade(A) onto the socket
A
B
D
F
H
G
C
I
A
C
Do not rotate lamp body too hard avoid base screw broken the Socket Assembly(D). and by turning the Socket Ring(C) clockwise.
Press the Holder(B) and insert it into the interior of the Screw the Tube(G) to the Circle base(H),then fix it Insert the bulb(I) into the socket.
Feather Shade(A). screw the Tube (F) to the Tube (G).
Screw the Socket Assembly (D) to the Tube(F) Put the light on a level surface to check if
by tightening the Screw(E) everything is stable.
A
B
D
F
H
G
C
I
A
C
yg g ()
yg
ENJOY YOUR LAMP
A
B
D
F
H
G
C
I
A
C