Joseph Miles JMQS105752 User manual

Assembly Instructions
Bath Filler and Bath Shower Mixer
Parts Supplied May Vary
Image may vary from actual product

2
Initial Checklist
When you are ready to start, make sure you have the right tools
to hand, plenty of space and a dry area for assembly.
This product must be connected to a water supply in
accordance with the Water Supply (Water Fittings) Regulations
1999, and UK Building Regulations. If you are in any doubt
about these requirements, contact a qualified plumber, your
local Water Company or the Water Regulations Advisory
Service (WRAS).
It is important to that both supply pipes are flushed before
connecting the filler to ensure no pipe/plumbing debris
entering the valve.
TURN OFF WATER MAINS SUPPLY. The mains stopcock is usually
situated where the supply enters the building.
It is also recommended that the water heating arrangements
are turned off.
Isolate the hot and cold water supply.
Maximum water pressure to filler is 5 bar.

3
Warning
CAUTION: DO NOT overtighten the ffixings otherwise it may
damage the product.
CAUTION: Always ensure the product is securely installed
before use.
When the installation is complete, turn the water supply on
and check for leaks on connection points.
Failure to follow these instructions may result in personal
injury, damage to the product and property damage.
Care should be taken when drilling into walls to avoid any
hidden pipes or wires.
When drilling through ceramic tiles use a specialist drill bit.
Where possible drill between tiles in the grout.
Always be aware of the danger of scalding from hot water.
Never twist or kink the hose or otherwise restrict the water
flow whilst in use.

4
Care and Cleaning
Use warm soapy water and a soft damp cloth to clean the
surface of the product. Wipe dry with a clean cloth.
Never use any solvents, scourers, abrasives, bleach,
acids, strong detergents, aggressive chemical cleaners or
solvent-type cleaning solutions on the product.
It is recommended to check all fittings for security and
tightness at regular intervals.
Manufacturer's guarantee
>The body and finish of this bathroom filler are guaranteed for 5 years,
working and decorative parts guaranteed for 3 years and consumable
parts 1 year subject to installation and use in compliance with the
recommendations set out in the instructions.
IMPORTANT - RETAIN THIS
INFORMATION FOR FUTURE
REFERENCE: READ CAREFULLY

5
Image may vary from
actual product

6
1 2
6mm
35mm
3
456 7
FOR BATH SHOWER MIXER ONLY
Image may vary from
actual product

7
Bath Shower Mixer
Only
Bath Shower Mixer
Only
Image may vary from
actual product