Jovial JOVGFW3 User manual

www.PyleUSA.com
2
WARNING:
• For your own safety, please read and understand these
warnings and keep this user guide for future reference.
• Always make sure the cart is fully extended and locked
before use. Always make sure the cart is folded and locked
properly before lifting or transporting.
• Do not run while using this product.
• Do not use accessories other than those designed for use
with your cart.
• Keep all packing materials away from children and recycle
where possible or where required by law.
MAINTENANCE
• To clean the trolley, wipe with a soft, dry cloth.
• Car polish may be used to maintain nish.
• Lubricate moving parts every 6 months.
WARNING:
• Keep hands and ngers away from moving or sliding parts!
• Always keep control of the Golf Push Cart -
Do not let it run down hills without full control.

PARTS LIST
AHandle grip
BUmbrella holder dock
CScorecard holder
DHandle tube
EUmbrella holder storage
FUpper bag holder bracket
GAdjustable handle mechanism
HMain upper frame tube
IFolding/locking buckle
JAnti-splay wire
KLeg bracket
LConnecting rods
MMain lower frame tube
NFoot brake
OStablizer tube
P2 holes leg frame
Q4 holes leg frame
RRight wheel locking mechanism
R1 Left wheel locking mechanism
SMain wheel
TAdjustable bag elastic
ULower bag holder bracket
VFront wheel assembly
www.PyleUSA.com
3
A
E
B
D
F
N
R1
GH
I
K
L
S
OP
R
MJQ
T
U
V
C

elastic rope
UNFOLDING STEPS
Fig. 3
Loosen the elastic
rope as Fig. 1.
Release the handle buckle to fully
extend the handle frame then lock
the locking buckle as Fig. 2.
www.PyleUSA.com
4
Fig. 1
Hold the upper tupe and lower bracket to open
the frame as Fig. 3
Release the wheel locking buckle, insert the wheel axel into
the wheel holder completely and then tighten the locking
buckle.
Remove the M6*40 screw and M6 nut from the front
wheel fork as Fig. 6, then assemble the front wheel on the
steel piece of lower bag bracket and xed it by screw and
nut, completely assembly as Fig. 7.
Fig. 5
M6*40
Screw
Fig. 2
buckle
Fig.4
locking buckle
M6*40
Screw
Fig. 6
Lower bag
holder bracket
Upper tupe
Fig. 7

FOLDING STEPS
www.PyleUSA.com
5
Folding the front
wheel as Fig. 8.
Release the buckle to fold the handle as
Fig. 11, then x the buckle.
Pull the folding pulling buckle and press
the handle to fold the trolley as Fig. 9 & 10.
Fixed the frame through eleastic rope as Fig. 13.
Folding status as Fig. 12. Pick up the trolley
using the handle and not the tubing when
lifting into car boot etc.
Using the brake
Press the brake pedal to
stop and press again to
release as Fig. 14.
Warning:
Pick up the trolley using the handle
and not the tubing when lifting into
car boot etc.
Fig. 14
Fig. 11
buckle
Fig. 9
Folding
pulling
buckle
Fig. 12
Fig. 10
Fig. 8
Fig. 13

Fig. 2Fig. 1 Fig. 3
www.PyleUSA.com
6
FRONT WHEEL ADJUSTMENT MECHANISM
1. If during use, you nd the cart
veers to the right or left, please see
the instructions to correct this
problem. (Fig. 1)
2. If the cart veers to the left, face the
front wheel of the cart and use the
Allen wrench provided to screw
the right bolt counterclockwise or
the left bolt clockwise until the
front wheel is centered between
the front fork. (Fig. 2)
3. If the cart veers to the right, face
the front wheel of the cart and use
the Allen wrench provided to screw
the left bolt counterclockwise or
the right bolt clockwise until the
front wheel is centered between
the front fork. (Fig. 3)

FEATURES:
• New Deluxe Scorecard Holder
• Upper and Lower Bracket with Strap
• Foam Handle Grip
• Ergonomic Padded Adjustable Handle
• Includes Scorecard Holder, and Patented Bag Holder
• Simple Quick Braking System
• Durable and Compact Size for Easy Storage and Transportation
• Easy to Fold and Unfold
• Designed for Multiple Pushing Positions
WHAT'S IN THE BOX:
• (1) 3-Wheel Golf Push Cart
TECHNICAL SPECS:
• Construction Material: AL Frame
• Max. Load Capacity: 33.1 lbs.
• Front Wheel Size: 9.5'' -inches
• Rear Wheels Size: 11.5'' -inches
• Folded Product Dimension (L x W x H): 14.4" x 19.1" x 23.1" -inches
• Unfolded Product Dimension (L x W x H): 28" x 47.3" x 45.1" -inches
www.PyleUSA.com
7
3. If the cart veers to the right, face
the front wheel of the cart and use
the Allen wrench provided to screw
the left bolt counterclockwise or
the right bolt clockwise until the
front wheel is centered between
the front fork. (Fig. 3)

Questions? Comments?
We are here to help!
Phone: [phone]
Email: [e-mail]