Joyside LTNP-F01-BEIGE Series User manual

INSTRUCTION MANUAL
JOYSIDE 10 FT x 10 FT Pergola
Series LTNP-F01-BEIGE
IF YOU PURCHASED THE PERGOLA ONLINE AND HAVE ANY
QUESTIONS OR CONCERNS
PLEASE CONTACT US WITH EMAIL
[e-mail]

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM
THIS TENT FABRIC. This Tent is Made With Fabric That Meets
CPAI-84 Specification For Flame Resistance. It is Not Fire Proof. The
Fabric Will Burn If Left In Continuous Contact With Any Flame Source.
The application of any foreign substance to the tent fabric may render
the flame-resistant properties ineffective.
Always read and follow the instructions before use. When assembling
and using this product, basic safety precautions must always be fol-
lowed to reduce the risk of personal injury and damage to the product or
surroundings.
Be sure to keep all children and pets away from the assembly area.
Some parts contain sharp edges. Wear protective gloves when han-
dling these items. It is recommended that, for safety issues, at least 2
people assemble the gazebo.
You must schedule enough time to complete the assembly. You can not
leave the unit unattended if it is not fully assembled, even if it is already
anchored to the ground. You should begin the assembly no less than 6
feet from any fixed obstruction such as fences, a garage, a house, over-
hanging branches, electrical wires, or laundry lines. You must assemble
your unit on level ground or a platform.
The unit must be anchored to either wood, stone tiles, or concrete using
appropriate screws for such flooring, or anchored into the earth or grass
with proper camp nails or anchors. Failure to do so may risk it blowing
away.
Check that all screws are tight before and during usage. Do not place
any type of heat conductor or source under, or within 5 feet of the unit
including, but not limited to, a barbeque or space heater.
The gazebo is designed to provide shade only. Do not use this gazebo
in strong wind and rain. Wind and rain can damage the gazebo and
could result in injury to you and others.

PARTS LIST
Description
A1
A2
B1
B2
C1
C2
D1
E1
E2
F
G
H1
H2
M
N
O
R
S
P
Post A1
Post A2
Cross Beam B1
Cross Beam B2
Cross Beam C1
Cross Beam C2
Roof Tube1
Pulling Rod E1
Pulling Rod E2
Guide Tube
Bracket
Corner Support H1
Corner Support H2
Bracket M
Bracket N
Post Decoration O
Post Decoration R
Post Hoof
Shade Fabric
Sketch QTY.
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
2 pcs
6 pcs
2 pcs
2 pcs
4 pcs
8 pcs
4 pcs
4 pcs
4 pcs
4 pcs
4 pcs
4 pcs
4 pcs
2 pcs
AA
BB
CC
DD
EE
FF
Bolt (M6x12)
Bolt (M6x35)
Bolt (M6x55)
Bolt (M6x75)
Anchor
Allen Key
84 pcs
8 pcs
2 pcs
12 pcs
8 pcs
8 pcs
D2 Roof Tube2 6 pcs

Assembly
STEP 1
STEP 2
A1
A2
B1
C2
B2
C1
Fig. 1 Fig. 2
Fig. 1
R
S
B1
C2
A1
DD
N
BB
Fig. 3 Fig. 4
A2
R
AA
Fig. 2
Fig. 3
A2
B2
C1
O
O
O
BB
NDD
O
Fig. 4
A1/A2
R
S
AA
S

Assembly
STEP 3
A2 H1 H2
C2
C1
C1
C2
B1
B2
B2
B1
H1
H2
Fig. 5
Fig. 5
Fig. 5
B1 / C1
B2 / C2
AA
Fig. 6 Fig. 7
Fig. 6
A1
A1
A2
Fig. 7
Fig. 7
A1/A2 H1
H2
AA
H1 / H2
AA
B1 / B2 / C1 / C2
Fig. 8
Fig. 8
FF S

Assembly
STEP 4
Fig. 9 Fig. 10
D1
D2
D1
D2
D1
D2
AA
Fig. 9
B1 / B2
CC
D1 / D2
F
F
G
G
G
Fig. 11b
Fig. 11b
Fig. 11a
Fig. 11a
Fig. 10
Fig. 10
Fig. 11b
AA
A1/A2
F
G
Fig. 11a
F
G
A1/A2
A2
AA
M

Fig. 12 Fig. 13
F
AA
E1 & E2
P
Fig. 12
& 13
Fig. 12
& 13
Fig. 12
& 13
E2
E1
E1
E2
P
P
M
Assembly
STEP 5

Assembly
STEP 6
Fig. 14
E1
E2
CLICK!
Fig. 14
P
E1
E2
E1
Fig. 14
P