JTS PCP HAND PUMP User manual

pcp hand
pump
manual

1. PACKAGE CONTENTS
PUMP HANDLE X1
PUMP CYLINDER ASSEMBLY X1
HOSE ASSEMBLY X1
DEAD HEAD X1
ASSEMBLY WRENCH X1
PRESSURE GUAGE X1
CHECK VALVE TOOL X1
SPARE 22MM O’RING X1
SPARE 20MM O’RING X1
SPARE 25MM O’RING X1
BALL INFLATOR ADAPTER X1
3MM ALLEN WRENCH X1
SPARE 5MM O’RING X3
SPARE 7MM O’RING X3
SPARE CHECK BALL SPRING X1
SPARE CHECK BALL X1
2. ASSEMBLY
STEP 1: Align pump handle
with top of cylinder assembly as
shown and rotate clockwise until
it is rmly attached to cylinder.
Tighten with assembly wrench
STEP 2: Remove dust/moisture
caps

STEP 3: Attach gauge using
assembly wrench
STEP 3: Attach ll hose as shown

4. USING YOUR HAND PUMP
STEP 1: Attach to pressure vessel
STEP 2: Ensure the bleed valve has been tightened
STEP 3: Place a foot on each base plate and position yourself
comfortably and balanced
STEP 4: Pull handle vertically applying long steady strokes.
Keeping back straight and exing your knees will help maintain
balance.
STEP 5: The pump will require more force as the pressure
builds. Do not exceed 3000 psi!
STEP 6: The pump will generate heat during the lling process.
If the heat becomes uncomfortable, stop and allow the pump to
cool
STEP 7: After completeing the lling process and before you
disconnect the hose, loosen the bleed valve to release and
stored pressure
WARNING: BEFORE REMOVING FILLING HOSE, ALWAYS BLEED THE AIR FROM
THE HOSE USING THE BLEED VALVE ON THE PUMP. NOT DOING SO CAN RESULT
IN THE HOSE WHIPPING AROUND, WHICH CAN CAUSE INJURY OR PROPERTY
DAMAGE.
!

1. MAINTENANCE
JTS hand pumps require very
little maintenance. We do
recommend the inner cylinder
be lubricated
every 3 months using silicon
grease.
STEP 1: Raise the pump to very
top of its stroke
STEP 2: Apply a small amount of
silicon grease to the inner cylinder.
Application should include the entire
cylinder top to
bottom.
NOTE: Appling to much grease
could
damage the seals
STEP 3: After applying the grease
work the pump up and down several
times. This will ensure grease is
evenly spread
DO NOT USE PETROLEUM/OIL OR PROPELLENT BASED LUBRICANTS.
OUTER
CYLINDER
INNER
CYLINDER

1. TROUBLE SHOOTING GUIDE
Do not return defective or damaged products to the place of purchase. If your
pump needs repair, call Xisico USA/JTS Airguns @ 281-647-9130 DO NOT
ATTEMPT TO DISASSEMBLE IT! Your pump requires special tools and
xtures to repair it. Any disassembly or modication not performed by Xisico
USA/JTS Airguns or their authorized repair facilities will void the warranty.
PROBLEMS SOLUTIONS
Pump looses pressure or is loose
during operation
Tighten bleed valve.
Tighten hose connections
Pump is difcult to operate Lubricate the inner cylinder
Pump springs down during operation
or becomes difcult to pull upward
Pump likely needs servicing. See
below

1. WARRANTY
This product is warranted to the retail consumer for 90 days from the date of pur-
chase against defects in material and workmanship and is not transferable.
WHAT IS COVERED
Replacement parts and labor.
WHAT IS NOT COVERED
Shipping charges to Xisico USA/JTS Airguns for defective product and damages
caused by abuse or failure to perform normal maintenance as well as any other ex-
pense. Consequential damages, or incidental expenses, including damage to proper-
ty. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
WARRANTY CLAIMS
Warranty Claims and Repair for U.S. and Canadian customers only. Please contact
Xisico USA/JTS Airguns at 281-647-9130
IMPLIED WARRANTIES
Any implied warranties, including the implied warranties of merchantability and
tness for a particular purpose, are limited in duration to 90 days from date
of retail purchase. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO
YOU. TO THE EXTENT ANY PROVISION OF THIS WARRANTY IS PROHIBITED BY
FEDERAL, STATE, OR MUNICIPAL LAW; WHICH CANNOT BE PREEMPTED, IT SHALL
NOT BE APPLICABLE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE AND
COUNTRY TO COUNTRY. WARRANTY VIOLATIONS
THE FOLLOWING WILL VOID YOUR WARRANTY:
• Physical abuse
• internal upgrades
90 DAY LIMITED WARRANTY

We reserve the right to make color and design changes and technical improvements. No
responsibility is accepted for printing errors or incorrect information.
Distributed by
Xisico USA/JTS Airguns
7724 Cherokee Street
Katy, TX 77494
www.jtsairguns.com
0222