Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - PHYSICAL LAYER CONFIGURATION GUIDE... User manual

JunosE™ Software
for E Series™ Broadband
Services Routers
Physical Layer Configuration Guide
Release
11.3.x
Published: 2010-09-24
Copyright © 2010, Juniper Networks, Inc.

Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are
owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,
6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
JunosE™ Software for E Series™ Broadband Services Routers Physical Layer Configuration Guide
Release 11.3.x
Copyright © 2010, Juniper Networks, Inc.
All rights reserved. Printed in USA.
Writing: Krupa Chandrashekar, Subash Babu Asokan, Mark Barnard, Bruce Gillham, Sarah Lesway-Ball, Helen Shaw, Brian Wesley Simmons,
Fran Singer, Michael Taillon
Editing: Benjamin Mann
Illustration: Nathaniel Woodward
Cover Design: Edmonds Design
Revision History
October 2010—FRS JunosE 11.3.x
The information in this document is current as of the date listed in the revision history.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. The Junos OS has no known time-related limitations through
the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
Copyright © 2010, Juniper Networks, Inc.ii

END USER LICENSE AGREEMENT
READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE.
BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS
CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO
BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED
HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS
REGARDING LICENSE TERMS.
1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or
Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred
to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable
license(s) for use of the Software (“Customer”) (collectively, the “Parties”).
2. The Software. In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, for
which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by
Juniper in equipment which Customer purchased from Juniper or an authorized Juniper reseller. “Software” also includes updates, upgrades
and new releases of such software. “Embedded Software” means Software which Juniper has embedded in or loaded onto the Juniper
equipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto the equipment.
3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer
a non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the
following use restrictions:
a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by
Customer from Juniper or an authorized Juniper reseller.
b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units
for which Customer has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access
Client software only, Customer shall use such Software on a single computer containing a single physical random access memory space
and containing any number of processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines
(e.g., Solaris zones) requires multiple licenses, regardless of whether such computers or virtualizations are physically contained on a single
chassis.
c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may
specify limits to Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent
users, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of
separate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput,
performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limits may restrict the use
of the Software to managing certain kinds of networks or require the Software to be used only in conjunction with other specific Software.
Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable licenses.
d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the
Software. Customer may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not
extend or create an additional trial period by re-installing the Software after the 30-day trial period.
e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s
enterprise network. Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the
Steel-Belted Radius software to support any commercial network access services.
The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase
the applicable license(s) for the Software from Juniper or an authorized Juniper reseller.
4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees
not to and shall not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized
copies of the Software (except as necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the
Software, in any form, to any third party; (d) remove any proprietary notices, labels, or marks on or in any copy of the Software or any product
in which the Software is embedded; (e) distribute any copy of the Software to any third party, including as may be embedded in Juniper
equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted feature, function, service, application, operation, or capability
without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, service, application,
operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper to any third party; (h) use the
iiiCopyright © 2010, Juniper Networks, Inc.

Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller; (i)
use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that
the Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking
of the Software to any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly
provided herein.
5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper,
Customer shall furnish such records to Juniper and certify its compliance with this Agreement.
6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper.
As such, Customer shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence,
which at a minimum includes restricting access to the Software to Customer employees and contractors having a need to use the Software
for Customer’s internal business purposes.
7. Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to
the Software, associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance
of any right, title, or interest in the Software or associated documentation, or a sale of the Software, associated documentation, or copies
of the Software.
8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty
statement that accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support
the Software. Support services may be purchased separately. Any such support shall be governed by a separate, written support services
agreement. TO THE MAXIMUM EXTENT PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA,
OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER
BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE.
EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW, JUNIPER DISCLAIMS ANY
AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES
JUNIPER WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT
ERROR OR INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’
or licensors’ liability to Customer, whether in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid
by Customer for the Software that gave rise to the claim, or if the Software is embedded in another Juniper product, the price paid by
Customer for such other product. Customer acknowledges and agrees that Juniper has set its prices and entered into this Agreement in
reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same reflect an allocation of risk between
the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss), and that the same
form an essential basis of the bargain between the Parties.
9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination
of the license granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related
documentation in Customer’s possession or control.
10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from
the purchase of the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction
shall be provided to Juniper prior to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All
payments made by Customer shall be net of any applicable withholding tax. Customer will provide reasonable assistance to Juniper in
connection with such withholding taxes by promptly: providing Juniper with valid tax receipts and other required documentation showing
Customer’s payment of any withholding taxes; completing appropriate applications that would reduce the amount of withholding tax to
be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder. Customer shall comply with
all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related to any
liability incurred by Juniper as a result of Customer’s non-compliance or delay with its responsibilities herein. Customer’s obligations under
this Section shall survive termination or expiration of this Agreement.
11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any
applicable foreign agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such
restrictions, laws or regulations, or without all necessary approvals. Customer shall be liable for any such violations. The version of the
Software supplied to Customer may contain encryption or other capabilities restricting Customer’s ability to export the Software without
an export license.
Copyright © 2010, Juniper Networks, Inc.iv

12. Commercial Computer Software. The Software is “commercial computer software” and is provided with restricted rights. Use,
duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS
227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.
13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer
with the interface information needed to achieve interoperability between the Software and another independently created program, on
payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use
such information in compliance with any applicable terms and conditions upon which Juniper makes such information available.
14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products
or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement,
and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party
software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent
portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such
portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper
will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three
years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA
94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of the LGPL
at http://www.gnu.org/licenses/lgpl.html .
15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws
principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes
arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal
courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer
with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written
(including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an
authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained
herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing
by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity
of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the
Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de
même que tous les documents y compris tout avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that
this Agreement and all related documentation is and will be in the English language)).
vCopyright © 2010, Juniper Networks, Inc.

Copyright © 2010, Juniper Networks, Inc.vi

Abbreviated Table of Contents
AbouttheDocumentation.........................................xix
Part 1 Chapters
Chapter 1 Configuring Channelized T3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 2 Configuring T3 and E3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 3 Configuring Unchannelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . 71
Chapter 4 Configuring Channelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . . 105
Chapter 5 Configuring Ethernet Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Chapter 6 Managing Tunnel-Service and IPSec-Service Interfaces . . . . . . . . . . . . . . 207
Part 2 Index
Index ...........................................................227
viiCopyright © 2010, Juniper Networks, Inc.

Copyright © 2010, Juniper Networks, Inc.viii
JunosE 11.3.x Physical Layer Configuration Guide

Table of Contents
AbouttheDocumentation.........................................xix
E Series and JunosE Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . xix
Audience..........................................................xix
E Series and JunosE Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . xix
ObtainingDocumentation............................................xxi
DocumentationFeedback............................................xxi
RequestingTechnicalSupport........................................xxi
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii
OpeningaCasewithJTAC........................................xxii
Part 1 Chapters
Chapter 1 Configuring Channelized T3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview...........................................................3
MDL/FDLSupport................................................3
MDL Standards ..............................................4
FDLStandards...............................................4
Timeout of Received MDL and FDL Messages . . . . . . . . . . . . . . . . . . . . . . 4
FrequencyofFDLPathMessages................................5
Higher-LevelProtocols............................................5
Platform Considerations ..............................................5
CT3/T3-F0 Line Modules and CT3/T3 12 I/O Modules . . . . . . . . . . . . . . . . . . . 6
ExchangingModules..............................................6
InterfaceStack..................................................6
Numbering Scheme ..............................................7
T3Controllers................................................7
T1 Channels .................................................7
FractionalT1.................................................8
HDLCChannels..............................................9
References .........................................................9
BeforeYouConfigureanInterface.......................................9
Configuration Tasks .................................................10
ConfiguringaT3Controller........................................10
ConfiguringMDLMessages.....................................11
OtherOptionalTasks.........................................12
ConfiguringT1Channels..........................................14
OptionalTasks..............................................14
ConfiguringFDLMessages.....................................17
ConfiguringanHDLCChannel......................................19
OptionalTasks..............................................19
ConfigurationExample...............................................22
ixCopyright © 2010, Juniper Networks, Inc.

TestingInterfaces...................................................22
TestingattheT3Layer...........................................23
TestingattheT1Layer...........................................25
MonitoringInterfaces................................................27
SettingaBaseline...............................................28
Displaying Counters and Time Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
OutputFiltering.................................................29
Chapter 2 Configuring T3 and E3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Overview..........................................................45
MDLSupport...................................................45
MDLStandards.............................................46
Timeout of Received MDL Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Higher-LevelProtocols...........................................47
Platform Considerations .............................................47
COCX-F3 Line Modules and Associated I/O Modules . . . . . . . . . . . . . . . . . . . 47
OCx/STMx/DS3-ATM Line Modules and 4xDs3 ATM I/O Modules . . . . . . . . 48
CT3/T3-F0 Line Modules and CT3/T3 12 I/O Modules . . . . . . . . . . . . . . . . . . 48
InterfaceStack.................................................49
NumberingScheme.............................................49
References ........................................................50
BeforeYouConfigureanInterface......................................50
ConfigurationTasks..................................................51
ConfiguringaT3oranE3Controller.................................51
ConfiguringMDLMessages....................................52
OptionalTasks..............................................53
ConfiguringFractionalT3.........................................55
ConfiguringanHDLCChannel.....................................57
OptionalTasks..............................................57
Configuration Examples .............................................59
Testing Interfaces ..................................................60
SendingBERTPatterns..........................................60
Enabling Local, Network, and Payload Loopback . . . . . . . . . . . . . . . . . . . . . . 61
EnablingRemoteLoopback.......................................62
MonitoringInterfaces................................................63
SettingaBaseline...............................................63
Displaying Counters and Time Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
OutputFiltering.................................................64
Chapter 3 Configuring Unchannelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . 71
Overview ..........................................................71
APSandMSP...................................................71
AutomaticSwitchover........................................72
ManualSwitchover...........................................72
Switching Mechanisms .......................................72
ReversionAfterSwitchover....................................73
Copyright © 2010, Juniper Networks, Inc.x
JunosE 11.3.x Physical Layer Configuration Guide

Communication Methods .....................................73
Higher-LevelProtocols...........................................75
Platform Considerations .............................................75
OCx/STMx/DS3-ATMLineModules................................76
OCx/STMxPOSLineModules.....................................76
OC48LineModules..............................................77
OC3/STM1GE/FELineModule.....................................77
ES24GLineModule.............................................78
E120RouterConfiguration.....................................78
E320RouterConfiguration....................................78
OCx/STMxATMIOAs.........................................78
OCx/STMxPOSIOAs.........................................79
NumberingScheme .............................................79
ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . . 79
E120andE320Routers.......................................80
InterfaceSpecifier...............................................81
ExchangingModules.............................................81
References ........................................................81
ConfigurationTasks.................................................82
ConfiguringtheSONET/SDHLayers................................82
ConfiguringAPS/MSP............................................87
Configuring the Working Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Configuring the Protect Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
ConfiguringSONET/SDHAlarms...............................90
ConfigurationExample........................................91
Configuring APS Event Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Manual Switching to a Redundant Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TestingInterfaces...................................................93
LoopbackTesting...............................................93
TestingConnectivity.............................................93
MonitoringSONET/SDHInterfaces.....................................94
MonitoringInterfaceStatistics.....................................94
Monitoring APS/MSP ...........................................102
Chapter 4 Configuring Channelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . . 105
Overview.........................................................105
SONETAPSandSDHMSP.......................................105
MDL/FDLSupport..............................................105
MDL Standards ............................................106
FDLStandards.............................................106
Timeout of Received MDL and FDL Messages . . . . . . . . . . . . . . . . . . . . 106
FrequencyofFDLPathMessages..............................107
Higher-LevelProtocols ..........................................107
PlatformConsiderations.............................................107
cOCx/STMxFOLineModule.....................................108
Interface Stack ................................................108
SONET/SDHVTControllers..................................109
T3 Controllers ..............................................112
HDLC .....................................................112
xiCopyright © 2010, Juniper Networks, Inc.
Table of Contents

NumberingScheme.............................................112
References ........................................................113
BeforeYouConfigureanInterface.....................................114
ConfigurationTasks.................................................115
SONET/SDHConfigurationTasks..................................115
ConfiguringHigherLayers.....................................119
T1/E1ConfigurationTasks........................................119
ConfiguringanUnframedE1Line...............................120
ConfiguringT1andE1Lines....................................121
Configuring T1 Interfaces to Send FDL Messages . . . . . . . . . . . . . . . . . . 123
Disabling Interfaces and Channel Groups . . . . . . . . . . . . . . . . . . . . . . . . 125
ConfiguringHigherLayers....................................126
T3ConfigurationTasks..........................................126
ConfiguringT3LineParameters...............................126
Configuring T3 Interfaces to Send MDL Messages . . . . . . . . . . . . . . . . . 128
Configuring T1 Channels on T3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . 129
Configuring T1 Channels to Send FDL Messages . . . . . . . . . . . . . . . . . . . 132
ConfiguringHigherLayers....................................134
HDLC Channel Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
OptionalTasks.............................................134
ConfigurationExamples.............................................136
Example 1: Configuring Interfaces in SONET Mode . . . . . . . . . . . . . . . . . . . . 137
Example 2: Configuring Interfaces in SDH Mode . . . . . . . . . . . . . . . . . . . . . . 138
Example 3: Configuring Frame Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Example4:ConfiguringPPP......................................139
TestingInterfaces..................................................139
SendingBERTPatterns..........................................140
ReceivingBERTPatterns.........................................141
Enabling Local or Network Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Enabling Remote Loopback Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
TestingConnectivity............................................146
Monitoring Interfaces ...............................................147
SettingaBaseline..............................................148
OutputFiltering................................................148
MonitoringAPS/MSP...........................................166
Chapter 5 Configuring Ethernet Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Ethernet Overview .................................................167
Features......................................................168
Ethernet Interface Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Numbering Scheme ............................................169
ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . 169
E120andE320Routers......................................169
InterfaceSpecifier..............................................170
FastEthernetI/OModules...........................................170
FE-8I/OModule...............................................170
FE-8SFPI/OModule............................................170
Copyright © 2010, Juniper Networks, Inc.xii
JunosE 11.3.x Physical Layer Configuration Guide

Gigabit Ethernet I/O Modules and IOAs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
GEI/OModule..................................................171
GE-2SFPI/OModule............................................171
PortsonGE-2SFPI/OModule.................................172
Bandwidth and Line Rate Considerations . . . . . . . . . . . . . . . . . . . . . . . . 172
GE-8I/OModule...............................................172
Bandwidth and Line Rate Considerations . . . . . . . . . . . . . . . . . . . . . . . . 173
Managing High-Density Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
OC3-2GEAPSI/OModule.......................................174
ES2-S1GE-4IOA...............................................174
ES2-S1GE-8IOA...............................................174
ES24GLMCombination.....................................175
ES210GLMCombination.....................................177
ES210GADVLMCombination.................................179
ES2-S3GE-20IOA.............................................180
ES210GLMCombination....................................180
Bandwidth and Line Rate Considerations . . . . . . . . . . . . . . . . . . . . . . . . 181
Managing High-Density Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
ES210GADVLMCombination.................................181
Bandwidth and Line Rate Considerations . . . . . . . . . . . . . . . . . . . . . . . . 182
Managing High-Density Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
10-GigabitEthernetIOAs............................................182
ES2-S110GEIOA...............................................182
Managing High-Density Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
ES2-S210GEPRIOA............................................183
ES210GUplinkLMCombination...............................183
ES210GLMCombination....................................184
ES210GADVLMCombination................................185
EthernetReferences................................................186
High-Density Ethernet ..............................................187
Managing Port Redundancy on Gigabit Ethernet I/O Modules . . . . . . . . . . . . . . . 188
ConfigurationTasksforEthernet......................................189
ConfiguringthePhysicalInterface.....................................190
DisablingEthernetInterfaces.........................................196
MonitoringEthernetInterfaces.......................................196
SettingStatisticsBaselines......................................196
UsingEthernetshowCommands..................................196
xiiiCopyright © 2010, Juniper Networks, Inc.
Table of Contents

Chapter 6 Managing Tunnel-Service and IPSec-Service Interfaces . . . . . . . . . . . . . . 207
Tunnel-Service and IPSec-Service Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
TypesofTunnel-ServerPorts.....................................208
DedicatedTunnel-ServerPorts...............................208
SharedTunnel-ServerPorts..................................208
Types of Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Tunnel-Service Interface Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . 209
Supported Modules for Dedicated Tunnel-Server Ports . . . . . . . . . . . . . . . . 209
ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . 209
E120andE320Routers......................................210
Supported Modules for Shared Tunnel-Server Ports . . . . . . . . . . . . . . . . . . . 210
ERX14xx Models and the ERX310 Broadband Services Router . . . . . . . 210
E120andE320Routers......................................210
NumberingScheme.............................................211
ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . . 211
E120andE320Routers.......................................211
InterfaceSpecifier..............................................212
Supported Applications for Dedicated and Shared Tunnel-Server Ports . . . 212
Redundancy and Interface Distribution of Tunnel-Service Interfaces . . . . . . . . . 213
SMs, ES2-S1 Service IOA, and Shared Tunnel-Server Modules . . . . . . . . . . . 213
Static IP Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Dynamic Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Interface Allocation for Shared Tunnel-Server Modules . . . . . . . . . . . . . 214
ISMs .........................................................214
Tunnel-Service Interface Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Provisioning Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Bandwidth Limitations of Shared Tunnel-Server Ports . . . . . . . . . . . . . 216
Exchanging Tunnel-Server Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Unprovisioned Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Configuring Tunnel-Server Ports and Tunnel-Service Interfaces . . . . . . . . . . . . . 217
Identifying the Physical Location of the Tunnel-Server Port . . . . . . . . . . . . . 217
Provisioning the Maximum Number of Interfaces on a Tunnel-Server
Port ......................................................218
Reserving Bandwidth on Shared Tunnel-Server Ports . . . . . . . . . . . . . . . . . . 218
Verifying the Tunnel-Server Interface Configuration . . . . . . . . . . . . . . . . . . . 219
Unprovisioning Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Monitoring Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Part 2 Index
Index ............................................................227
Copyright © 2010, Juniper Networks, Inc.xiv
JunosE 11.3.x Physical Layer Configuration Guide

List of Figures
Part 1 Chapters
Chapter 1 Configuring Channelized T3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 1: Stack for Channelized T3 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 2: T1 Channels and DS0 Timeslots on a T3 Line . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Configuring T3 and E3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure3:StackforT3ATMInterfaces...................................49
Figure 4: Stack for T3 Frame and E3 Frame Interfaces . . . . . . . . . . . . . . . . . . . . . 49
Chapter 3 Configuring Unchannelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . 71
Figure 5: Interface Stack for OCx/STMx/DS3-ATM Interfaces . . . . . . . . . . . . . . . . 76
Figure 6: Interface Stack for OCx/STMx POS and OC48/STM16 Interfaces . . . . . 77
Figure 7: Interface Stack for OCx/STMx POS Interfaces . . . . . . . . . . . . . . . . . . . . . 79
Chapter 4 Configuring Channelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . . 105
Figure 8: Stack for cOCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Figure9:SONETMultiplexing.........................................110
Figure10:SDHMultiplexing...........................................111
Figure 11: Configuring Fractional T1 in SONET Mode . . . . . . . . . . . . . . . . . . . . . . . 137
Figure 12: Configuring Fractional E1 and Unframed E1 in SDH Mode . . . . . . . . . . . 138
Chapter 6 Managing Tunnel-Service and IPSec-Service Interfaces . . . . . . . . . . . . . . 207
Figure 13: Interface Stacking for Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . 207
xvCopyright © 2010, Juniper Networks, Inc.

Copyright © 2010, Juniper Networks, Inc.xvi
JunosE 11.3.x Physical Layer Configuration Guide

List of Tables
AbouttheDocumentation.........................................xix
Table1:NoticeIcons.................................................xx
Table2:TextandSyntaxConventions...................................xx
Part 1 Chapters
Chapter 1 Configuring Channelized T3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 3: MDL and FDL Message Strings and Message Types . . . . . . . . . . . . . . . . . . 4
Table 4: Sample T1 Subchannel/Timeslot Assignments . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Configuring T3 and E3 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table 5: MDL Message Strings and Message Types . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 3 Configuring Unchannelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . 71
Table 6: Sample Pairings for Valid APS/MSP Groups . . . . . . . . . . . . . . . . . . . . . . . 72
Table7:ExplanationofK1Byte........................................74
Table8:ExplanationofK2Byte........................................74
Chapter 4 Configuring Channelized OCx/STMx Interfaces . . . . . . . . . . . . . . . . . . . . . . 105
Table 9: MDL and FDL Message Strings and Message Types . . . . . . . . . . . . . . . . 106
Table 10: Tributary Standards That cOCx/STMx Interfaces Support . . . . . . . . . . 110
Table 11: Identifiers for SONET/SDH VT Controllers . . . . . . . . . . . . . . . . . . . . . . . . 111
Table 12: Definitions for Identifiers for SONET/SDH VT Controllers . . . . . . . . . . . . 111
Table 13: Identifiers for T3 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Chapter 5 Configuring Ethernet Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Table 14: Average Data Rate for ERX310 router or in Slots 2 or 4 of an ERX1440
router ........................................................173
Table 15: Average Data Rate When Installed in All Other Slots on an ERX1440
router ........................................................173
Table 16: Average Data Rate for One ES2-S1 GE-8 IOA Installed with an ES2 4G
LM...........................................................175
Table 17: Average Data Rate for Two ES2-S1 GE-8 IOAs Installed with an ES2
4GLM........................................................176
Table 18: Average Data Rate for ES2-S1 GE-8 IOA Combined with Other IOA
TypesinSameSlot..............................................177
Table 19: Average Data Rate for One ES2-S1 GE-8 IOA Installed with an ES2 10G
LM...........................................................178
Table 20: Average Data Rate for Two ES2-S1 GE-8 IOAs Installed with an ES2
10GLM.......................................................178
Table 21: Average Data Rate for One ES2-S1 GE-8 IOA Installed with an ES2 10G
ADVLM.......................................................179
xviiCopyright © 2010, Juniper Networks, Inc.

Table 22: Average Data Rate for Two ES2-S1 GE-8 IOAs Installed with an ES2
10GADVLM...................................................180
Table 23: Average Data Rate for One ES2-S3 GE-20 IOA Installed with an ES2
10G LM .......................................................181
Table 24: Average Data Rate for One ES2-S3 GE-20 IOA Installed with an ES2
10GADVLM...................................................182
Chapter 6 Managing Tunnel-Service and IPSec-Service Interfaces . . . . . . . . . . . . . . 207
Table 25: Sample Capacity, Configuration, and Utilization Values for
Tunnel-ServiceInterfaces........................................216
Copyright © 2010, Juniper Networks, Inc.xviii
JunosE 11.3.x Physical Layer Configuration Guide

About the Documentation
•E Series and JunosE Documentation and Release Notes on page xix
•Audience on page xix
•E Series and JunosE Text and Syntax Conventions on page xix
•Obtaining Documentation on page xxi
•Documentation Feedback on page xxi
•Requesting Technical Support on page xxi
E Series and JunosE Documentation and Release Notes
For a list of related JunosE documentation, see
http://www.juniper.net/techpubs/software/index.html .
If the information in the latest release notes differs from the information in the
documentation, follow the JunosE Release Notes.
To obtain the most current version of all Juniper Networks®technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
Audience
This guide is intended for experienced system and network specialists working with
Juniper Networks E Series Broadband Services Routers in an Internet access environment.
E Series and JunosE Text and Syntax Conventions
Table 1 on page xx defines notice icons used in this documentation.
xixCopyright © 2010, Juniper Networks, Inc.

Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Table 2 on page xx defines text and syntax conventions that we use throughout the
E Series and JunosE documentation.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
•Issue the clock source command.
•Specify the keyword exp-msg.
Represents commands and keywords in text.Bold text like this
host1(config)#traffic class low-loss1Represents text that the user must type.Bold text like this
host1#show ip ospf 2
Routing Process OSPF 2 with Router
ID 5.5.0.250
Router is an Area Border Router
(ABR)
Represents information as displayed on your
terminal’s screen.
Fixed-width text like this
•There are two levels of access: user and
privileged.
•clusterId, ipAddress.
•Appendix A, System Specifications
•Emphasizes words.
•Identifies variables.
•Identifies chapter, appendix, and book
names.
Italic text like this
Press Ctrl + b.Indicates that you must press two or more
keys simultaneously.
Plus sign (+) linking key names
Syntax Conventions in the Command Reference Guide
terminal lengthRepresents keywords.Plain text like this
mask,accessListNameRepresents variables.Italic text like this
Copyright © 2010, Juniper Networks, Inc.xx
JunosE 11.3.x Physical Layer Configuration Guide