LED HORN
Instruction Manual
Guarantee, service, repairs and maintenance
The JUUKO products are covered by a guarantee/warranty against material,
construction and manufacturing faults. During the guarantee/warranty period, JUUKO
may replace the product or faulty parts. Work under guarantee/warranty must be
carried out by JUUKO JUUKO.
This is not covered by the guarantee/ warranty:
▪Faults resulting from normal wear and tear
▪Parts of a consumable nature
▪
▪Faults resulting from incorrect installation and use
▪Condensation and water damage
Maintenance:
▪
▪Use spare parts from JUUKO only
▪Contact your representative if you require service or other assistance
▪Keep the product in a dry, clean place
▪Keep contacts and antennas clean
▪
General Information on Safety
reaction may not assemble, disassemble, install, put into operation, repair or operate the product.
personnel and in accordance with the relevant safety requirements.
•In the event of malfunctioning and visible defects or irregularities, the product must be stopped,
Warning against hazardous situation
Warning against electrical voltage
Thank you for purchasing a JUUKO product.
READ ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING
THE PRODUCT.
This manual includes general information concerning the operation of the radio remote control
transmitter.
(English)
IP 65
TA3
Technical data
Voltage 24V ~ 264V AC/DC
76 × 88 × 225 (mm)
23mA@120Vac
210g
IP65
Dimensions
Standby power
MAX. 90dB
Sound Output
Weight
Protection degree
PC-ABS / PC
Housing material
Operating and storage temperature
(-20°C)~(+55°C)/(-40°C)~(+65°C)
