JVC Everio Controller Instructions for use

1) Close the LCD monitor to turn off the camcorder.
The battery will take 90 minutes to full charge. The lamp will
blink indicating the battery is in the charging process. The
lamp will turn off when the battery is completely charged.
Charging the Battery Pack
2) Attach the battery pack.
Slide the battery pack down until it locks in place.
Bottom of the Camcorder
3) Connect the AC adapter.
Using Laser Touch
• How to change settings using Laser Touch
2) Slide your finger up
and down on the Laser
sensor.
3) Touch the OK button.
• Using on-screen buttons
[A] To select an on-screen
button appearing on
the left side, touch the
portion of the sensor
next to the on-screen
button.
[B] To select an on-screen button appearing at the bottom of
the screen. Press the buttons underneath them.
• How to playback your videos using Laser Touch.
1) Press the MENU button.
1) Press the SELECT PLAY/
REC button to display
thumbnails on the screen.
2) Highlight thumbnail using
laser sensor and press OK.
1) Load the supplied CD-ROM into the
computers CD/DVD drive. The set
up screen should appear to guide
you through the process. If not,
double click the CD-ROM icon (in
My Computer).
2) Click Easy Installation
to start.
3) Now click yes to start
InstallShield Wizard.
4) Choose your desired
language.
5) Click yes to start software
installation.
6) Click Finish.
Recording Your Memories
Preparation: • Insert an SD card.
• Open lens cover.
• Open the LCD monitor to turn on the
Camcorder.
4
The movie camcorder icon
represents recording video.
The camera icon represents
recording stills.
1) Slide the mode switch to select (video or still image) mode.
2) Press the SELECT PLAY/REC button to set on recording
mode.
3) Press the START/STOP button to start or stop recording.
• To take digital still images, first slide the mode switch to
Still Image mode.
4) Press the SNAPSHOT button to take pictures.
• To view the video or image you just recorded select
During the preview you can delete the video or image by
selecting
How to Install
7) Connect the USB Cable to both
PC and Everio Camcorder.
Video features to set in menu are:
Quality (4 recording modes Ultra
Fine, Fine, Normal & Eco.), Zoom,
DIS, 16:9 recording.
Digital Still feature to set is:
Quality (Fine and Standard).
Select an item from the menu list on the menu screen.
Easy Start up Guide
This easy start up guide is designed to navigate you
to using your new Everio quickly. Please refer to the
owner’s manual for a detailed listing of features.
For our online tutorials please visit:
http://camcorder.jvc.com/tutorials.jsp
BATT.
DC Jack
AC Adapter
To AC Outlet
(110V to 240V)
Charge lamp
SD
PLAY/REC
SELECT
USB Port
To AC Outlet
AC Adapter
USB Cable
DC Jack
USB Jack
MENU
IMAGE QUALITY
GAIN UP
SHUTTER MODE
BASIC SETTINGS
~!
Ÿ
MENU
IMAGE QUALITY
GAIN UP
SHUTTER MODE
BASIC SETTINGS
M8S3_EasyStartup_EN_B6_4.indd 1M8S3_EasyStartup_EN_B6_4.indd 1 7/16/2008 12:52:56 PM7/16/2008 12:52:56 PM

JVC Company of America
A Division of JVC Americas Corp.
1700 Valley Road, Wayne, NJ 07470
www.jvc.com
Customer Service
TOLL FREE: 1-800-252-5722
For our online tutorials please visit:
http://camcorder.jvc.com/tutorials.jsp
Register your EVERIO online at:
REGISTER.JVC.COM
and receive a special offer.
LYT1975-001A
0708ASR-MW-OT
1) Connect camcorder to PC using the USB cable.
2) Open the LCD monitor to turn on the camcorder.
File Backup
1) After connecting USB to and AC adapter to camcorder and
PC open LCD to turn camcorder on.
2) On the camcorder: use the Laser sensor to select Back Up
then press OK.
PowerCinema will start.
3) On the PC: click EVERIO_SD then
click OK.
When the progress bar disappears,
the process is complete.
File Backup (PC) using software
File Backup (PC and Mac) without using software
3) Create a folder to backup up
files into.
4) On the camcorder: use
the Laser sensor to select
Playback on PC then press
OK.
5) On the PC (Windows®):
select [Open folder to view
files using Windows Explorer]
and click [OK].
6) Select the folder that you
want to backup. Drag and
drop it in to the folder you
created in (step 3).
SD_Video: This folder contains all your video files.
DCIM: This folder contains all your still images.
On the PC (Mac): double click
EVERIO_SD
Playing Your Memories on a TV
Preparation:
• Turn off both camcorder and TV.
1) Plug in the supplied A/V cable to the camcorder. Then push
the single plug side into the A/V input. You must first open
the cover for the A/V input.
2) Turn on the camcorder and the TV.
3) Slide the mode switch to select Video or Still
Image Mode
4) Press the SELECT PLAY/ REC button to put
the camcorder in playback mode.
5) Slide your finger up and down on
the Laser Sensor to select the
desired thumbnail for video or still
image playback. Then press OK.
• If the aspect ratio of the image
is not correct as shown on the
right. Change the settings in
[SELECT TV TYPE] from the
menu.
• To display the camcorder’s
on-screen display on TV Set
[DISPLAY ON TV] to [ON]
from the menu.
16:9 TV 4:3 TV
To AC Outlet
AC Adapter
AV Jack
DC Jack
AV Cable
AV Input Jack
PLAY/REC
SELECT
Uploading Video Clips to YouTube™
• How to record a File (video clip)
1) Slide the mode switch to select video mode.
2) Press the SELECT PLAY/REC button to set on recording
mode.
3) Press the UPLOAD button twice to “UPLOAD REC ON”.
indicator appears.
4)
Press the START/STOP button to start recording a video clip.
Recording stops automatically after 10 minutes.
• How to upload a File (video clip) to YouTube™
1) Install software from the supplied CD-ROM. (see “How to
Install”)
2) After connecting USB and AC Adapter to camcorder and PC,
open the LCD to turn camcorder on.
3) On the camcorder: press the UPLOAD button.
PowerCinema starts automatically.
4)
On the PC: click on the check box of desired file.
The “
s ”mark appears on the left of the selected file.
To select other files, repeat this step.
5) Click [YouTube™].
Uploading Video Clips to YouTube™ (cont.)
6) Login your username and password.
Click [Next].
To create a YouTube™ account, click [Sign up to
YouTube™].
7) Select video category and broadcast option. Click [Next].
8) Click on the check box and then click [Upload].
Uploading starts.
Click [Cancel] to cancel procedure.
9) Click [Finish].
Trademark
YouTube and the YouTube logo are trademarks and/or
registered trademarks of YouTube LLC.
M8S3_EasyStartup_EN_B6_4.indd 2M8S3_EasyStartup_EN_B6_4.indd 2 7/16/2008 12:52:57 PM7/16/2008 12:52:57 PM