JVC Everio GZ-GX1 Operating and maintenance manual

Basic User Guide
HD MEMORY CAMERA
GZ-GX1 A
AC Adapter
AP-V30U HDMI Mini
Cable AV Cable
(exclusive)
USB Cable
(Type A - Mini Type B) CD-ROM Stylus pen Basic User Guide
(this manual)
Verifying the Accessories
INFO
SNAP
SHOT
START
/STOP
INDEX
Remote Control
RM-V760U
Battery Pack
BN-VG114U
LYT2456-001A-M
EN
.Detailed User Guide
For more details on operating this
product, please refer to the “Detailed
User Guide” at the following website.
o
http://manual3.jvckenwood.com/
index.html/
.Mobile User Guide
When you are outside, refer to the
“Mobile User Guide”. Mobile User
Guide can be viewed with standard
browser for Android tablet and iPhone.
o
http://manual3.jvckenwood.com/
mobile/us/
Dear Customers
Thank you for purchasing this JVC product.
Before use, please read the Safety Precautions
and Cautions on p. 2 and p. 18 to ensure
safe use of this product.
For Future Reference:
Enter the Model No. (located on the bottom of
the camera) and Serial No.
(located on the battery pack mount of the
camera) below.
Model No.
Serial No.

Safety Precautions
.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
NOTES:
•The rating plate and safety caution are on the
bottom and/or the back of the main unit.
•The serial number plate is on the battery pack
mount.
•The rating information and safety caution of the
AC adapter are on its upper and lower sides.
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
(212°F) or incinerate.
Replace battery with Panasonic, Sanyo, Sony or
Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
•Dispose of used battery promptly.
•Keep away from children.
•
Do not disassemble and do not dispose of in fire.
For USA-California Only
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
– special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm (3-15/16") or
more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules or
laws governing the disposal of these batteries must
be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fire or electric shock.
CAUTION!
The following notes concern possible physical
damage to this unit and to the user.
Carrying or holding this unit by the LCD monitor
can result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the unit.
CAUTION!
Connecting cables (Audio/Video, etc.) to this unit
and leaving it on top of the TV is not recommended,
as tripping on the cables will cause
this unit to fall,
resulting in damage.
CAUTION:
The mains plug shall remain readily operable.
•Remove the mains plug immediately if the
camcorder functions abnormally.
WARNING:
The battery pack, the camcorder with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunlight, fire or the like.
CAUTION:
To maintain compliance with FCC’s RF exposure
guidelines, use only the supplied antenna.
Unauthorized antenna, modification, or attachments
could damage the transmitter and may violate FCC
regulations.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may Cause
undesired operation.
Make a backup of important recorded data
JVC will not be responsible for any lost data.
It is recommended to copy your important recorded
data to a disc or other recording media for storage
once every 3 months.
2

.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
10.Only use attachments/accessories specified by
the manufacturer.
11.Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used,
use caution when
moving the cart/
apparatus combination
to avoid injury from tip-over.
12.Unplug this apparatus during lightning storms or
when unused for long periods of time.
13.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
If this symbol is shown, it is only valid
in the European Union.
Remember that this unit is intended for
private consumer use only.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
• AVCHD Progressive/AVCHD and AVCHD
Progressive/AVCHD logo are trademarks
of Panasonic Corporation and Sony Corporation.
• x.v.Color™ is a trademark of
Sony Corporation.
• HDMI is a trademark of HDMI
Licensing, LLC.
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
• Windows®is either registered trademark or
trademark of Microsoft Corporation in the
United States and/or other countries.
• Macintosh is a registered trademark of Apple Inc.
• iMovie, iPhone and iPhoto are trademarks of
Apple Inc., registered in the U.S. and other
countries.
• YouTube™, the YouTube logo and Android™ are
trademarks and/or registered trademarks of
Google Inc.
•
Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
•
Wi-Fi, Wi-Fi logo, Wi-Fi CERTIFIED, Wi-Fi
CERTIFIED logo, WPA, and WPA2 are trademarks
or registered trademarks of Wi-Fi Alliance.
•
QR Code is registered trademark of DENSO
WAVE INCORPORATED.
•
Other product and company names included in
this instruction manual are trademarks and/or
registered trademarks of their respective holders.
•
Marks such as ™ and ® have been omitted in this
manual.
When using the AC adapter in areas other
than the USA
The provided AC adapter features automatic
voltage selection in the AC range from 110 V to 240 V.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to
an AC wall outlet other than American National
Standard C73 series type use an AC plug
adapter, called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest
JVC dealer. Plug Adapter
Remove the AC adapter from the AC wall outlet
when not in use.
Do not leave dust or metal objects adhered to
the AC wall outlet or AC adapter (power/DC plug).
•
•
•
•
-
-
-
-
•
Be sure to use the supplied AC adapter.
Do not use the supplied AC adapter with other
devices.
•
•
Be sure to keep it out of reach of young children.
It may be swallowed accidentally.
Do not place the stylus pen within the reach of
young children.
Doing so may cause blindness or other
damages to the eye.
Do not poke your eye with the stylus pen.
Scratches and damages caused by using stylus
pens besides the supplied one cannot be
guaranteed.
Be sure to use the supplied stylus pen.
Stylus Pen
3

Contents
Safety Precautions ................................. 2
Available Accessories For the Camera .. 4
Getting Started
Charging the Battery Pack ..................... 5
Inserting an SD Card .............................. 6
Using the Icon Buttons/Thumbnails ........ 6
Changing Menu Settings ........................ 7
Clock Setting .......................................... 7
Recording
Video Recording .................................... 8
Still Image Recording ............................. 9
Playback
Playing Back/Deleting Files on this Unit .... 9
Playing Back on TV .............................. 10
Copying
Keep It High Definition (Windows) ....... 11
Install Everio MediaBrowser (Windows) ..... 12
USB Menu Operations ......................... 13
File Backup (Windows) ........................ 14
View Your Video (Windows) ................. 14
AVCHD Disc Creation (Windows) ........ 15
How to Upload a File (Video Clip) to
YouTube (Windows) ............................ 15
Record to a DVD or VHS Recorder ...... 16
Working with iMovie and iPhoto ........... 17
Simple File Backup with a Mac ............ 17
Further Information
Troubleshooting/Cautions .................... 18
Recordable Time/Specifications .......... 20
For more information, please refer to the Detailed User Guide.
http://manual3.jvckenwood.com/index.html/
Available Accessories For the Camera
Product Name* Description
Battery Pack
0BN-VG121U
0BN-VG138U
0Provides a longer recording time than the battery pack that
comes with this unit or it can also be used as a spare battery
pack.
Battery Charger
0AA-VG1U
0Enables the battery pack to be charged without using this unit.
* To order any of these accessories please visit www.store.jvc.com or call 1-800-252-5722
4

Charging the Battery Pack
.
(Base)
To detach the battery pack
Charging finished:
Goes out
Charging in progress:
Blinks
Charging Lamp
Plug in the power.
(110 V to 240 V)
AC Adapter
To AC Outlet
Cover
Connect the DC
connector.
Align the top of the battery
with the mark on this unit,
and slide in until the battery
clicks into place.
The battery pack is not
charged at the time of
purchase.
Attach the battery pack.
Mark
CAUTION
Be sure to use JVC battery packs.
0If you use any other battery packs besides JVC battery packs, safety and
performance cannot be guaranteed.
0
The charging time is when the unit is used at 25°C (77°F). If the battery pack is
charged outside the room temperature range of 10°C to 35°C (50°F to 95°F), charging
may take a longer time or it may not start. The recordable and playable time may also
be shortened under some usage conditions such as at low temperature.
0You can record or play back videos while the AC adapter is connected. (Battery
charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance
of the battery may drop if it is left attached to the unit.
Battery Pack Charging Time Continuous
Recording Time Actual Recording Time
BN-VG114U (Supplied) 2 h 30 m 1 h 15 m 40 m
BN-VG121U 3 h 30 m 1 h 55 m 1 h 5 m
BN-VG138U 6 h 10 m 3 h 25 m 1 h 55 m
0The battery pack is not charged at the time of purchase.
0The above are values when “LIGHT” is set to “OFF”, “MONITOR BRIGHTNESS” is set
to “3” (standard), and “SYSTEM SELECT” is set to “60i”.
0Recording time may differ depending on the shooting environment and usage.
5

Inserting an SD Card
Insert a commercially available SD card before recording.
.
※
Turn off the power of this unit before
inserting or removing a card.
(Base) Insert an SD card.
Open the cover.Close the LCD monitor.
Terminal
oTo remove the card
Push the card inward once, then pull it out straight.
NOTE
Operations are confirmed on the following SD cards.
Manufacturer Panasonic, TOSHIBA, SanDisk
Video A
Class 4 or higher compatible SD card (2 GB)/
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (48 GB to 64 GB)
(When recording with video quality “UXP”, Class 6 or higher is
recommended.)
When recording in progressive format (60p), Class 6 or higher is required.
Still Image B
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) / SDXC card
(48 GB to 64 GB)
0Using SD cards (including SDHC/SDXC cards) other than those specified
above may result in recording failure or data loss.
0
This unit is not guaranteed to operate with all SD cards, even when using the ones
specified above. Some SD cards may not work due to specification changes, etc.
0To protect the data, do not touch the terminals of the SD card.
0When using an SDXC card, check its compatibility with the OS of your computer
by referring to the Detailed User Guide.
Using the Icon Buttons/Thumbnails
A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.
.
≪REC
0:01:23 0:12:34
Index ScreenPlayback ScreenRecording Screen
MENU
≪PLAY REC
0:01:23 0:12:34
MENU
≪REC
6

Changing Menu Settings
Select an item from the menu list on the menu screen.
1Tap “MENU”.
.
REC
≪PLAY
MENU
0The shortcut menu appears.
2Tap the desired item in the shortcut
menu.
.
MENU
0If “MENU” is tapped, go to step 3.
0If an item other than “MENU” is tapped,
go to step 4.
3Tap the desired menu.
.
SCENE SELECT
VIDEO
0To adjust settings in the “COMMON”
menu, tap “Q”.
0Tap “∧” or “∨” to scroll the screen.
4Tap the desired setting.
oTo exit the screen
Tap “L” (quit).
oTo return to the previous screen
Tap “J” (return).
Clock Setting
1Open the LCD monitor.
.
0The unit turns on. When the LCD
monitor is closed, the unit turns off.
2Tap “YES” when “SET DATE/TIME!”
is displayed.
.
NO
YES
SET DATE/TIME!
3Set the date and time.
.
AM
201211000
TIMEDATE
CLOCK SETTING
JAN
SET
0
When the year, month, day, hour, or minute
item is tapped, “∧” and “∨” will be displayed.
Tap “∧” or “∨” to adjust the value.
0
Repeat this step to input the year, month, day,
hour, and minute.
4
After setting the date and time, tap “SET”.
5Select the region where you live and
tap “SAVE”.
0The city name and time difference are
displayed.
0Tap “<” or “>” to select the city name.
.
GMT
SAVE
CLOCK/AREA SETTING
7

Video Recording
You can record without worrying about the setting details by using the Intelligent Auto mode. Settings
such as exposure and focus will be adjusted automatically to suit the shooting conditions.
0
In case of specific shooting scenes such as person etc., its icon is displayed on the screen.
Before recording an important scene, it is recommended to conduct a trial recording.
.
(Telephoto)
(Wide angle)
Zooming
Press again to
stop.
Start recording.
H
P
A
C
A
2
Check if the recording
mode is Avideo. Check if the
recording mode is C
Intelligent Auto.
If the mode is HManual,
tap Hon the touch
screen, then tap Pto
switch.
If the mode is Bstill image,
tap Bon the touch screen,
then tap Ato switch.
0The mode can also be switched between video and still image by pressing the A/B
button on this unit.
0
You can also tap 6 on the touch screen to record. To stop recording, tap 7 .
In addition, you can also tap D to zoom.
oIndications during video recording
.
MENU
≪PLAY REC
0:00:00 [0:54]
Image Stabilizer
Scene Counter
Battery Indicator
Remaining Recording Time
Video Quality Recording Media
NOTE
0
The estimated recording time of the supplied battery pack is approximately 40 minutes.
0Do not remove the battery pack, AC adapter, or SD card when the access lamp
is lighted. The recorded data may become unreadable.
0This unit turns itself off automatically to conserve power when it is not operated
for 5 minutes. (only when using the battery pack)
0The angle of view may change when the image stabilizer is turned on or off.
0Videos recorded in 60p mode (select “60p” in “SYSTEM SELECT”) can be
played back only by the AVCHD Progressive compatible devices.
8

Still Image Recording
.
Lights up during still
image recording
Press fully
Take a still image.
Lights up in green when
focused
Press halfway
Set the focus on the subject.
If the mode is A
video, tap Aon the
touch screen, then
tap Bto switch.
Check if the
recording mode is
Bstill image.
0Image stabilization only starts when the button is pressed halfway.
0
You can also tap Q on the touch screen to record. However, focus cannot be set by pressing halfway.
Playing Back/Deleting Files on this Unit
Select and play back the recorded videos or still images from an index screen (thumbnail display).
.
The mode can also be switched by
pressing the PLAY/REC button on
this unit.
SETREL ALLSEL ALL
DELETE
QUIT
Tap on the files to delete.
Tap A.
To delete unwanted files
Turn up the
volume
Turn down
the volume
Volume adjustment during playback
Tap uto return to the video
index screen.
Tap on the file to play back.
Tap “SET”.
A delete mark appears on the selected file.
To remove the delete mark, tap again.
Tap Eto return to the recording
mode.
Tap Fon the touch screen
to select the playback mode.
Tap eto pause playback.
Tap “OK”.
Tap “EXECUTE” when the
confirmation message appears.
Tap Aor Bto select the video
or still image mode.
0
When playing back videos recorded in 60p mode (select “60p” in “SYSTEM SELECT”),
please refer to the “Detailed User Guide”.
oTo capture a still image during playback
Pause the playback and press the SNAPSHOT button.
9

Playing Back on TV
Preparation:
0Turn off both camera and TV.
To connect using the HDMI mini connector
When connecting to a 1080p compatible TV, set “HDMI OUTPUT” to “AUTO”.
.
HDMI Connector
Input
TV
HDMI Mini Cable
(Provided)
To HDMI Mini
Connector
NOTE
0Use a High Speed HDMI mini cable as the HDMI mini cable when not using the
provided one.
To connect using the AV connector
Change the settings in “VIDEO OUTPUT” according to the connection.
.
AV
Red
White
Yell ow
TV
Audio Input (R)
Audio Input (L)
Video Input
Video Input
AV Cable (Provided)
To AV Connector
Playback Operation
After the connection with TV is completed
ATurn on the camera and the TV.
0This unit powers on automatically when the AC adapter is connected.
BSelect the TV input switch.
CStart playback on the camera.
NOTE
0Image/audio cannot be output from the AV and HDMI connectors when the
battery is in use during Wi-Fi mode. Use an AC adapter.
10

Keep It High Definition (Windows)
oBack up to a computer:
The provided JVC software also makes it easy to copy your videos to a computer.
oFor customers with a Blu-ray Player:
The provided JVC software lets you create high definition AVCHD discs using standard blank
DVD-R media, and your Windows PC with DVD Burner.
An AVCHD disc is a great choice because it contains the original HD video, which can be
stored on inexpensive blank DVD-R media.
These discs can be played back in virtually any recent Blu-ray player that has the AVCHD logo.
Upload to YouTube
YouTube is a great way to share your videos, in either HD or SD quality. JVC makes it easy.
Copying Files
You can create discs or copy the files on this unit by connecting it to various devices.
I:Recordable and playable
F:Playable only
—:Not applicable
Media Selection
Standard
Quality HD Quality
Page
.
(VHS
Tape)
.
(DVD
Disc)
.
(DVD
Disc)
.
(Blu-ray
Disc)
.
(Device’s
internal
HDD)
Device
Blu-ray Recorder
.
—IF *1 I I See Detailed User
Guide and manual
of recorder.
DVD Recorder
.
—IF *1 —ISee Detailed User
Guide and manual
of recorder.
VCR
.
I— — — —
See Detailed User
Guide and manual
of recorder.
Computer
.
—I *2 I *3 I I p. 14
*1 Only on AVCHD compatible devices.
*2 To create DVD-Video discs, it is necessary to install the additional software. For
details, refer to the Pixela homepage.
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
*3 For details on how to create a disc using a computer, refer to the Detailed User Guide.
0Videos recorded in 60p mode (select “60p” in “SYSTEM SELECT”) can be saved only
on Blu-ray discs.
0Blu-ray discs that store videos recorded in 60p mode (select “60p” in “SYSTEM
SELECT”) can be played back only by the AVCHD Progressive compatible devices.
Each of these solutions is explained in detail in the following sections.
11

Install Everio MediaBrowser (Windows)
Everio MediaBrowser is included with your
camera. It lets you archive and organize
your videos. It also lets you create discs and
upload video to YouTube, and other
popular web sites.
Preparation:
0
Load the provided CD-ROM into your PC.
0
In Windows Vista / Windows 7, the auto play
dialog box appears.
1Click “Everio MediaBrowser 4”.
.
0Follow the on-screen instructions.
2Click “Finish”.
3Click “Quit”.
.
0Installation ends and icons are created
on the desktop.
Everio MediaBrowser uses a
calendar based interface that makes
it easy to find any video you have
recorded by selecting the
appropriate date.
.
12

USB Menu Operations
By connecting a USB cable between this
unit and your computer, you can perform
operations such as file backups to PC/disc
or file uploads to file-sharing site using your
computer.
Preparation:
0Install the Everio MediaBrowser software
onto the PC.
0Disconnect the power supply to turn off
the camera.
0Connect the camera to the PC with the
USB cable. Refer to the connection
diagram in the “File Backup (Windows)”
section. (p. 14)
0Reconnect the power supply to turn on
the camera.
1
The “SELECT DEVICE” menu appears.
Tap “CONNECT TO PC” on the camera’s
touch screen.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
0
Tap “CONNECT TO OTHER” if the camera
is connected to a device other than a
computer.
2
The “CONNECT TO PC” menu appears.
Tap an option that best suits your needs.
.
PLAYBACK ON PC
CONNECT TO PC
Option Usage
PLAYBACK
ON PC
0
To play back your recordings
on the PC.
0
To back up your recordings
on the PC without using the
provided software.
CREATE
DISC
0
To save your recordings on a
disc.
DIRECT
DISC
0
To save all unsaved
recordings on a disc.
UPLOAD 0 To upload videos to file-
sharing sites.
BACK UP 0To back up recordings on
the PC.
For detailed operations on the above
options, refer to the other sections in this
guide or the “Detailed User Guide”.
13

File Backup (Windows)
Preparation:
0Install the Everio MediaBrowser software
onto the PC.
0Make sure that enough space is left in the
PC’s HDD.
0Disconnect the power supply to turn off
the camera.
0Connect the camera to the PC with the
USB cable.
0Reconnect the power supply to turn on
the camera.
.
To USB Connector
To AC Outlet
(110 V to 240 V)
AC Adapter
USB Cable
(Provided)
To DC
Connector
To USB
Connector
oOn the camera:
1Tap “CONNECT TO PC” on the
camera’s touch screen.
2Tap “BACK UP” on the camera’s
touch screen.
.
BACK UP
CONNECT TO PC
0Everio MediaBrowser starts on the PC.
oOn the PC:
3Select the volume.
.
2
1
Click
Click
4Start backup.
.
Click
Saving destination (PC)
NOTE
0File backup is only supported by
the provided software.
View Your Video (Windows)
0To view video that is still on your camera, click on Device>Camcorder
in the left side panel of Everio MediaBrowser.
0To view video that has already been archived to the computer, click
on Library>Calendar and then choose the date the video was
recorded.
NOTE
0Choose Settings/Preferences to see the folder where
MediaBrowser stores your videos. You can also play back
your videos from this folder in most popular media players.
14

AVCHD Disc Creation (Windows)
0
Everio MediaBrowser makes it possible to
create AVCHD discs to archive your recordings
in their original high definition quality.
0You can use any standard DVD-R, DVD-
RW, DVD+R or DVD+RW disc.
0
Recordings made in the XP, SP, or EP mode
are recorded with no loss in quality. Recordings
made in the UXP mode are first converted to
the XP mode, and then recorded.
0A standard 4.7 GB disc will hold
approximately 35 minutes of video in the
highest quality setting.
0
AVCHD discs can be played back in any
Blu-ray player that is AVCHD compatible.
Just look for the AVCHD logo.
.
Preparation:
0Install the software on your PC.
1Click on the “Create Disc” button.
.
2Select the video clips you wish to
include.
3Choose a menu background and
enter a menu title.
4Create the AVCHD disc.
NOTE
0
In order to include UXP recordings on your AVCHD discs, be sure to go to
Settings>Disc Creation Settings, and under “AVC Disc Creation in UXP mode”,
choose “Re-encode to XP mode quality level”.
How to Upload a File (Video Clip) to
YouTube (Windows)
Uploading Videos
You can upload your videos to YouTube using
the provided software “Everio MediaBrowser”.
Preparation:
0Install the software on your PC.
1Click on the “YouTube” button.
.
2Select the video clips you wish to
include.
3Enter account and upload
information.
4Start upload to YouTube.
For details on how to upload to YouTube,
refer to “MediaBrowser Help”.
.
oTrouble with Uploading Videos
0Check if you have created an account
with YouTube.
o
Trouble with Using the Provided
Software “Everio MediaBrowser”
0Consult the customer service center.
(p. 16)
15

.
Customer Support Information
Use of this software is authorized according to the terms of the software license.
Pixela (for inquires regarding the provided software)
Region Language Phone #
USA and Canada English [phone] (toll-free)
Europe (UK, Germany, France,
and Spain) English/German/French/Spanish [phone] (toll-free)
Other Countries in Europe English/German/French/Spanish [phone]
Asia (Philippines) English [phone]
nihCanihC ese 10800-163-0014 (toll-free)
Homepage: http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
Please check our website for latest information and downloading.
Record to a DVD or VHS Recorder
It is also possible to record to a DVD or VHS recorder. Please note that this will create a
standard definition recording with standard definition picture quality.
.
AV
Audio Input (R)
Audio Input (L)
Video Input
Video Input
Red
White
Yellow
To DC Connector
To AC Outlet
(110 V to 240 V)
AC Adapter
AV Cable (Provided)
To AV Connector
DVD/VHS Recorder
Preparation:
0Use the supplied AV cable. The yellow connection is video. The white connection is left
channel audio. The red connection is right channel audio. Connect this cable to the AV
input on your DVD or VHS recorder.
0Follow your DVD/VHS recorder instructions to copy (dub) the video.
16

Working with iMovie and iPhoto
0You may use the software supplied with
the Mac Computer to view and edit files
from the Camera.
0Connect the Camera to the Mac
Computer using a USB Cable.
.
USB cable
(Provided)
To USB
port
To USB
Connector
NOTE
0Files must be transferred to the
Mac Computer for editing.
oiMovie and iPhoto
You can import files from this unit to a
computer using Apple’s iMovie ’08, ’09
or ’11 (video) or iPhoto (still image).
To verify the system requirements, select
“About This Mac” from the Apple menu. You
can determine the operating system
version, processor and amount of memory.
NOTE
0
For the latest information on iMovie
or iPhoto, refer to the Apple website.
0
For details on how to use iMovie or
iPhoto, refer to the help file of the
software.
0
Videos recorded in 60p mode (Set
“60p” in “SYSTEM SELECT”) cannot
be imported to the Mac Computer.
0
There is no guarantee that the
operations will work with all
computer environments.
Simple File Backup with a Mac
Preparation:
0Make sure that enough space is left in the
Mac’s HDD.
0Close the LCD monitor to turn off the
camera. Disconnect the power supply.
1Open the LCD monitor to connect
to the computer with the USB
cable.
.
USB cable
(Provided)
To USB
port
To USB
Connector
0Reconnect the power supply to turn on
the camera.
2Tap “CONNECT TO PC” on the
camera’s touch screen.
3Tap “BACK UP” on the camera’s
touch screen.
.
BACK UP
CONNECT TO PC
4Copy and paste the files to the Mac
Computer for backup.
17

Troubleshooting/Cautions
.
Battery Pack
Troubleshooting
The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure
to read the following cautions:
Terminals
•
To avoid hazards
... do not burn.
do not short-circuit the terminals. Keep it away
from metallic objects when not in use. When
transporting, carry the battery in a plastic bag.
do not modify or disassemble.
do not expose the battery to temperatures
exceeding 60°C (140°F), as this may cause the
battery to overheat, explode or catch fire.
use only specified chargers.
...
...
...
...
...
...
...
...
...
...
•
To prevent damage and prolong service life
do not subject to unnecessary shock.
charge within the temperature range of 10°C
to 35°C (50°F to 95°F). Cooler temperatures
require longer charging time, or in some cases
stop charging at all.
Warmer temperatures prevent complete
charging, or in some cases stop charging at all.
store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
keep a 30% battery level (X) if the battery pack
is not to be used for a long period of time.
In addition, fully charge and then fully discharge
the battery pack every 6 months, then continue
to store it at a 30% battery level (X).
remove from charger or powered unit when not
in use, as some machines use current even
when switched off.
do not drop or subject to strong impact.
While the LCD monitor screen has more than
99.99% effective pixels, 0.01% of the pixels
may be bright spots (red, blue, green) or dark
spots. This is not a malfunction. The spots will
not be recorded.
ATTENTION: The product you have purchased
is powered by a rechargeable
battery that is recyclable.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery.
(USA and Canada only)
Recording Medium
•Be sure to follow the guidelines below
to prevent corruption or damage to your
recorded data.
•Do not bend or drop the recording medium,
or subject it to strong pressure, jolts or
vibrations.
•
Do not splash the recording medium with water.
•Do not use, replace, or store the recording
medium in locations that are exposed to
strong static electricity or electrical noise.
•Do not turn off the camcorder power or
remove the battery or AC adapter during
shooting, playback, or when otherwise
accessing the recording medium.
•Do not bring the recording medium near
objects that have a strong magnetic field or
that emit strong electromagnetic waves.
•
Do not store the recording medium in locations
with high temperature or high humidity.
•Do not touch the metal parts.
•
When formatting or erasing data using
the camcorder, only the file administration
information is changed. The data is not
completely erased from the recording medium.
If you want to completely erase all of the data,
we recommend either using commercially
available software that is specially designed
for that purpose, or by physically destroying
the camcorder with a hammer etc.
LCD Monitor
•To prevent damage to the LCD monitor,
DO NOT
... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on the
bottom.
•To prolong service life
... avoid rubbing it with coarse cloth.
If the above do not solve the problem, consult
your nearest JVC dealer or JVC service center.
Remove the AC adapter and battery pack from
this unit, reattach them, open the LCD monitor
and this unit powers on automatically.
Turn off the power. (Close the LCD monitor.)
In such a case, reset the unit.
This unit is a microcomputer-controlled device.
Electrostatic discharge, external noise and
interference (from a TV, a radio, etc.) might
prevent it from functioning properly.
If you have difficulties operating the unit, refer
to the detailed descriptions in the “Detailed
User Guide”.
Refer to the “Troubleshooting” section in the
“Detailed User Guide”.
If you encounter problems with this unit, check the
following before requesting service.
http://manual3.jvckenwood.com/index.html/
1.
A
B
2.
3.
18

.
•To prevent the unit from dropping,
•Fasten the grip belt securely.
•When using the camcorder with a tripod,
attach the camcorder to the tripod securely.
If the camcorder drops, you may be injured
and the camcorder may be damaged.
When a child uses the unit, there must be
parental guidance.
Declaration of Conformity
Changes or modifications not approved by
JVC could void the user’s authority to operate
the equipment. This equipment has been
tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures: Reorient or relocate
the receiving antenna. Increase the separation
between the equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/
TV technician for help.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Main Unit
•For safety, DO NOT
... open the camcorder’s chassis.
... disassemble or modify the unit.
... allow inflammables, water or metallic objects
to enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
... place naked flame sources, such as lighted
candles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to the
power plug or an AC wall outlet.
... insert any objects in the camcorder.
•Avoid using the unit
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near
a cooking stove.
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C
or 104°F) or extremely low (under 0°C or 32°F)
temperatures.
•DO NOT leave the unit
... in places of over 50°C (122°F).
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the
unit in high places while a cable is connected
may result in a malfunction if the cable is
caught and the unit falls onto the floor.
•To protect the unit, DO NOT
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively when using the hand strap.
... swing the soft camcorder case excessively
when the camcorder is inside it.
... store the camcorder in a dusty or sandy area.
Model Number : GZ-GX1U
Trade Name : JVC
Responsible party : JVC AMERICAS CORP.
Address : 1700 Valley Road Wayne, N. J. 07470
Telephone Number : 973-317-5000
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
When the temperature of this unit rises during
recording, 7will turn yellow to alert.
The power may turn off to protect the circuit if
the temperature of this unit rises too much.
While this unit may be used with the LCD
monitor reversed and closed, the temperature
rises more easily. Leave the LCD monitor open
when using this unit in places exposed to direct
sunlight or high temperatures.
...
in places subject to excessive shock or vibration.
... near a television set.
19

Recordable Time/Specifications
Approximate Video Recording Time
Quality SDHC/SDXC Card
4 GB 8 GB 16 GB 32 GB 48 GB 64 GB
60p 15 m 35 m 1 h 10 m 2 h 30 m 3 h 50 m 5 h
UXP 20 m 40 m 1 h 20 m 2 h 50 m 4 h 10 m 5 h 40 m
XP 30 m 1 h 2 h 4 h 6 h 8 h 10 m
SP 40 m 1 h 20 m 2 h 50 m 5 h 50 m 8 h 30 m 11 h 30 m
EP 1 h 40 m 3 h 30 m 7 h 10 m 14 h 40 m 21 h 30 m 28 h 50 m
0The approximate recording time is only a guide. The actual recording time may shorten
depending on the shooting environment.
Camera
Power supply Using AC adapter: DC 5.2 V, Using battery pack: DC 3.6 V
Power consumption 3.7 W (when “LIGHT” is set to “OFF” and “MONITOR
BRIGHTNESS” is set to “3” (standard))
Rated Current Consumption: 1.8 A
Dimensions 57 mm x 63 mm x 129 mm (2-1/4" x 2-1/2" x 5-1/8")
(W x H x D: excluding grip belt)
Mass Approx. 360 g (0.8 lbs) (camera only),
Approx. 400 g (0.89 lbs) (including supplied battery pack)
AC Adapter (AP-V30U)
Power supply AC 110 V to 240 V, 50 Hz/60 Hz
Output DC 5.2 V, 1.8 A
Dimensions 78 mm x 34 mm x 46 mm (3-1/8" x 1-3/8" x 1-13/16")
(W x H x D: excluding cord and AC plug)
Mass Approx. 107 g (0.24 lbs)
The specifications and appearance of this product are subject to changes for
further improvement without prior notice.
*LYT2456-001A-M*
©2012 JVC KENWOOD Corporation US 0112HOH-SW-VM
20