JVC GY-HD250U - 3-ccd Prohd Camcorder Guide

Black Magic Design Intensity Card
Capabilities:
Black Magic Design’s Intensity card is an HDMI capture card. That provides:
ProHD camcorder owners that have recorded 60P/50P tapes with an immediate means of
ingesting 60P/50Precorded footage into popular NLE systems. When a ProHD recorded
720P60/50/30/25/34* tape is played back on a BR-HD50U** the deck’s HDMI output an
be applied to this capture for ingest.
This card enables on the fly ingest of :
?ProHD 720P60/50/30/25/24 footage into a Windows or a Mac based NLE system.
?Since no machine control is provided Only on the fly capture from the BR-HD50U is
possible.
* When playing back ProHD 720P60/50/30/25/24 footage the BR-HD50U HDMI output
is 720P60. Using the BR-HD50U’s cross converter, the HDMI output can be set to be
1080i60/50 or 480i or 576i.
** BR-HD50U firmware version 108 is required to interoperate with the Intensity card.

Intensity card and Windows based HD Workflow
BR-HD50
HDMI
[720p60/50]
Cross converted
1080i60/50 or 480i 0r 576i
Black Magic
Design
Intensity
(HDMI card)
Capturing
Windows PC(w/PCIe bus)
Adobe Premiere
Pro2.0
ProHD Camcorder
HDV
tape
Editing

Intensity card and Windows based HD Workflow
Requirements:
?NLE software:Adobe Premiere Pro2.0
?PC hardware: PCIe bus
?VTR control is not possible; on the fly capture only.
?BR-HD50U firmware : Ver. 1.08
?Intensity firmware: Requires driver 1.2 or later. This
driver is available on Black Magic Design’s website at
the following URL:
?http://www.blackmagic-design.com/support/detail.asp?techID=178

Intensity Card and MAC based HD Workflow
BR-HD50
Capturing
Apple PC(Mac Pro)
Final Cut Pro
Ver5.1.2
GY-HD250
GY-HD200
HDV
tape
Editing
Black Magic
Design
Intensity
(HDMI card)
HDMI
[720p60/50]
Cross converted
1080i60/50 or 480i 0r 576i

Intensity and MAC based HD Workflow
Requirements:
NLE software: Final Cut Pro5.1.2
NLE hardware: Mac Pro with PCIe bus is required
BR-HD50U firmware: Ver. 1.08 or later
VTR control is not possible; on the fly capture only
Intensity firmware: Requires driver 1.2 or later. This driver is
available on Black Magic Design’s website at the following URL:
http://www.blackmagic-design.com/support/detail.asp?techID=178