JVC GY-HMQ10U User manual

4K MEMORY CARD CAMERA RECORDER
*The illustration shows the GY-HMQ10U/GY-HMQ10E with the supplied
audio unit attached. (Microphone is optional.)
For Future Reference:
Enter the Model No. (located on the bottom of
the camera) and Serial No.
(located on the battery pack mount of the
camera) below.
Model No. GY-HMQ10
Serial No.
Please read the following before getting started:
Thank you for purchasing this JVC product.
Before operating this unit, please read the instructions carefully to ensure the
best possible performance.
In this manual, each model number is described without the last letter (U/E)
which means the shipping destination. (U: for USA and Canada, E: for Europe)
Only “U” models (GY-HMQ10U) have been evaluated by UL.
LYT2468-001A-M
GY-HMQ10U/
GY-HMQ10E
INSTRUCTIONS

Contents
Introduction
Main Features ......................................................................... 3
Safety Precautions .................................................................. 4
Precautions for Proper Use ................................................... 10
Accessories .......................................................................... 12
Names of Parts ..................................................................... 13
LCD Screen Display .............................................................. 18
Using the Touch Screen ........................................................ 21
Preparations
Preparation and Adjustment Before Use ............................... 22
Attaching the Audio Unit .................................................... 22
Attaching an External Microphone ..................................... 22
Adjusting the Grip Belt ....................................................... 23
Setting up the Remote Control .......................................... 23
Attaching the Tripod .......................................................... 23
Removing the Hood ........................................................... 23
Opening the Lens Cover .................................................... 23
Charging the Battery Pack .................................................... 24
Turning On/Off the Power ..................................................... 25
Clock Setting ......................................................................... 26
Assigning Functions to the USER Buttons ............................ 27
Tally Settings ........................................................................ 27
Adjusting the Touch Panel Button Position ............................ 27
Changing the Display Language ........................................... 28
Inserting an SDHC/SDXC Card ............................................. 29
Write-Protect Switch on the SDHC/SDXC Card ................ 29
Estimated Recordable Time of SDHC/SDXC Cards .......... 30
Formatting (Initializing) SDHC/SDXC Cards ...................... 30
Viewing the Viewfinder/LCD Monitor ..................................... 31
Shooting
Selecting a Shooting Mode ................................................... 32
Selecting the Full Auto / Manual Shooting Mode ............... 32
Selecting a Focusing Mode ............................................... 32
Selecting a Video Recording Format or Recording Mode ..... 33
Selecting a Video Recording Format ................................. 33
Selecting a Video Recording Mode (HD Recording Only) . 33
Shooting ................................................................................ 33
Checking Image on Monitor before Shooting ..................... 34
Zoom Operation ................................................................ 35
Adjusting the Focus Manually ............................................... 35
Using the Focus Assist Function ....................................... 36
Using the Magnifying Function .......................................... 36
Using the Tele Macro Feature ............................................... 37
Displaying the Zebra Pattern ................................................. 37
Adjusting the Exposure Manually .......................................... 38
Adjusting Manual Gain .......................................................... 38
Adjusting the Shutter Speed ................................................. 39
Adjusting the Aperture ........................................................... 40
Adjusting the White Balance ................................................. 41
Adjusting Automatic White Balance ................................... 41
Using the Full Auto White (FAW) Function ........................ 42
Adjusting the Camera Image ................................................. 42
Using the Image Stabilizer Feature ....................................... 43
Setting Backlight Compensation ........................................... 43
Setting Touch Priority AE/AF ................................................. 43
Setting the Grid ..................................................................... 43
Setting Time-lapse Recording ............................................... 44
Checking the Remaining Recording Time ............................. 44
Audio Recording ................................................................... 45
Setting the Reference Audio Recording Level ................... 45
Using the Built-in Microphone ............................................ 45
Using an External Microphone Connected to the [INPUT1/
INPUT2] Terminal .......................................................... 45
Reducing Wind Noise ........................................................ 46
Monitoring Audio Sound Using a Headphone ....................... 46
Playback
Playing Back Videos ............................................................. 47
Playing Back in Magnified Display ..................................... 48
Adjusting the Volume of Videos ......................................... 48
Checking the Recording Date and Other Information ........ 49
Index Screen Display ......................................................... 49
Screen Display During Playback ....................................... 50
Playing a Video with Defective Management Information ...... 50
Viewing Images on a Monitor ................................................ 51
Playing Videos Recorded in 4K2K Mode ........................... 52
Playing Videos Recorded in 1920 Mode ............................ 53
Deleting Unwanted Files ....................................................... 54
Protecting Files ..................................................................... 55
Copy
Copying to Computer ............................................................ 57
List of Files and Folders ..................................................... 58
Settings Menu
Operating the Menu .............................................................. 59
Operating the Main Menu .................................................. 59
Operating the Common Menu ........................................... 59
Recording Menu .................................................................... 60
Playback Menu ..................................................................... 63
Common Menu ..................................................................... 63
Further Information
Error Displays and Actions .................................................... 65
Trouble .................................................................................. 66
Specifications ........................................................................ 69
Contents
2

Main Features
This camera recorder enables recording of 4K2K/HD format images
to an SDHC/SDXC card, and also playback of these images.
Recording in 4K2K Mode
You can record videos in the super fine 4K2K quality (3840 x 2160),
which is equivalent to about four times the resolution of the full high
definition quality.
Recording in HD Mode
You can also record videos in the full high definition quality (1920 x
1080) of the AVCHD format.
Recording on SDHC/SDXC Cards (Class 6/10)
The absence of mechanisms with the use of SDHC/SDXC cards
(Class 6/10) as recording media brings about increased operation
reliability.
Supports 60Hz/50Hz HD Signals in Both 4K2K
and HD Modes
Focus Assist Function
Enables easy and accurate focusing during shooting.
Wide Variety of User Buttons Added
Enables you to switch camera settings instantly to suit the shooting
conditions.
Built-in Viewfinder and Color LCD Monitor
Displays the status screens, menu screens for settings, and alarm
indications, in addition to the camera image and playback image.
Built-in Monitor Speaker for Audio Checking
Zebra Pattern Video Level Indication
Full Auto Shooting Mode
Eliminates the need for troublesome switch operations by
automatically providing a wide range of compatibility with shooting
conditions that change as you move between indoors and outdoors
or between bright and dark locations.
Image Stabilizer Feature
Reduces blurring of images due to camera shake.
White Balance Adjustment Feature
Enables white balance to be adjusted automatically or manually.
Slow Shutter
Makes it possible to brightly shoot video of dark subjects with little
motion by accumulating the images.
Two Audio Input Terminals
This camera recorder comes with two XLR terminals, which can be
used as audio input terminals for the built-in or external microphone.
Supports Wired Remote Control
Connection to PCs via USB Port
Files stored on an SDHC/SDXC card can be retrieved to a PC.
About This Manual
oSymbols
Caution ：Describes precautions to be taken during
operation.
Memo ：Describes information for user’s reference,
such as functions and usage restrictions.
A：Indicates the page or item to refer to.
oContents of This Manual
0The copyright of this manual belongs to JVC. Unauthorized
reprint, duplication, etc. of this manual, wholly or partially, is
strictly prohibited.
0The designs, specifications, and other contents of this manual
are subject to change for further improvement without prior
notice.
0AVCHD Progressive/AVCHD and the AVCHD Progressive/
AVCHD logo are trademarks of Panasonic Corporation and
Sony Corporation.
0HDMIT(High-Definition Multimedia Interface) and
are trademarks or registered trademarks of HDMI Licensing,
LLC.
0This product is manufactured under license from Dolby
Laboratories.
0Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
0Microsoft、Windows and Windows Vista are the registered
trademark of USA Microsoft Corporation, in USA and other
countries.
0Other company and product names in this manual are
trademarks or registered trademarks of the respective
companies. Marks such as E and W have been omitted in this
manual.
Introduction
3

Safety Precautions
.
This product contains a CR Coin Cell Lithium Battery which
contains Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
For USA-California Only
When the equipment is installed in a cabinet or on a shelf, make
sure that it has sufficient space on all sides to allow for ventilation
(10 cm (3-15/16")or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc.
the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids
(such as cosmetics or medicines, flower vases, potted plants,
cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
■ For GY-HMQ10U
WARNING:
The battery pack, the camera with battery installed, and
the remote control with battery installed should not be exposed
to excessive heat such as direct sunlight, fire or the like.
NOTES:
•The rating plate and safety caution are on the bottom and/or
the back of the main unit.
The serial number plate is on the bottom of the unit.
The rating information and safety caution of the AC adapter
are on it supper and lower sides.
•
•
REMARQUES :
•
La plaque d’identification et l’avertissement de sécurité se
trouvent sous l’appareil et/ou au dos.
La plaque du numéro de série est située sur la partie inférieure
de l’appareil.
Les informations d’identification et l’avertissement de sécurité
de l’adaptateur secteur sont situés sur ses côtés supérieur et
inférieur.
•
•
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, with in an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerousvoltage" with in the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point with in an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
FOR USA AND CANADA
POUR CANADA
AVERTISSEMENT : POUR ÉVITER
LES RISQUES D’INCENDIE OU
D’ÉLECTROCUTION, NE PAS EXPOSER
L’APPAREIL À LA PLUIE NI À L’HUMIDITÉ.
ATTENTION
RISQUE D'ÉLECTROCUTION
NE PAS OUVRIR
ATTENTION:
POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
NE PAS OUVRIR LE BOÎTIER.
AUCUNE PIÉCE INTÉRIEURE N'EST À RÉGLER PAR L'UTILISATEUR.
SE RÉFÉRER À UN AGENT QUALIFIÉ EN CAS DE PROBLÉME.
Le symbole de I'éclair à I'intérieur d'un triangle
équilatéral est destiné à alerter I'utilisateur sur la
présence d'une "tension dangereuse" non isolée dans
le boîtier du produit. Cette tension est suffisante pour
provoquer I'électrocution de personnes.
Le point d'exclamation à I'intérieur d'un triangle
équilatéral est destiné à alerter I'utilisateur sur la
présence d'opérations d'entretien importantes au
sujet desquelles des renseignements se trouvent
dans le manuel d'instructions.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated.
Do not recharge,disassemble,heat above 100°C (212°F) or
incinerate.
Replace battery with Panasonic, Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is in correctly
replaced.
•
Dispose of used battery promptly.
•
Keep away from children.
•Do not disassemble and do not dispose of in fire.
CAUTION:
The mains plug shall remain readily operable.
•Remove the mains plug immediately if the camera functions
abnormally.
Introduction
4

.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not approved by JVC could void
the user’s authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
If this symbol is shown, it is only valid in
the European Union.
•
Remove the AC adapter from the AC wall outlet when not in use.
•
Do not leave dust or metal objects adhered to the AC wall outlet
or AC adapter (power/DC plug).
When using the AC adapter in areas other than
the USA
The provided AC adapter features automatic voltage selection
in the AC range from 110 V to 240 V.
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to an AC wall outlet
other than American National Standard C73 series type use
an AC plug adapter, called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest JVC dealer.
Plug Adapter
Do not point the lens directly into the sun. This can cause eye
injuries, as well as leadto the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to this
unit and to the user.
Carrying or holding this unit by the LCD monitor can result in
dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the unit.
CAUTION!
Connecting cables (Audio/Video, etc.) to this unit and leaving it
on top of the TV is not recommended, as tripping on the cables
will cause the unit to fall, resulting in damage.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifi ers)
that produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10. Only use attachments/accessories specified by
the manufacturer.
11. Use only with the cart, stand, tripod,
bracket, or table specified by
the manufacturer, or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury
from tip-over.
12. Unplug this apparatus during lightning storms or when unused
for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Introduction
5

.
■ For GY-HMQ10E
CAUTIONS:
•
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified personnel.
When you are not using the AC adapter for a long period of
time, it is recommended that you disconnect the power cord
from AC outlet.
•
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in your home
or the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical approved
type, as originally fitted, and to replace the fuse cover.
If nonetheless the mains plug is cut off be sure to remove the fuse
and dispose of the plug immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then follow
the instructions given below:
DO NOT make any connection to the Larger Terminal coded E
or Green.
The wires in the mains lead are coloured in accordance with
the following code:
Blue to N
(Neutral) or Black
Brown to L (Live)
or Red
If these colours do not correspond with the terminal identifications
of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consulta competent electrician.
NOTES:
•The rating plate and safety caution are on the bottom and/or
the back of the main unit.
The serial number plate is on the bottom of the unit.
The rating information and safety caution of the AC adapter
are on its upper and lower sides.
•
•
CAUTION:
To avoid electric shock or damage
to the unit, first firmly insert the small
end of the power cord into the AC
Adapter until it is no longer wobbly,
and then plug the larger end of
the power cord in to an AC outlet.
Do not point the lens directly into the sun. This can cause eye
injuries, as well as lead to the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the
unit and to the user.
Carrying or holding the unit by the LCD monitor can result in
dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces. It could tip
over, causing serious damage to the unit.
CAUTION!
Connecting cables(Audio/Video, etc.) to the unit and leaving it
on top of the TV is not recommended,as tripping on the cables
will cause the unit to fall, resulting in damage.
When the equipment is installed in a cabinet or on a shelf, make
sure that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc.
the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such
as cosmetics or medicines, flower vases, potted plants, cups
etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
CAUTION:
The mains plug shall remain readily operable.
•Remove the mains plug immediately if the camera functions
abnormally.
WARNING:
The battery pack, the camera with battery installed, and
the remote control with battery installed should not be exposed
to excessive heat such as direct sunlight, fire or the Iike.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated.
Do not recharge,disassemble,heat above 100°C or incinerate.
Replace battery with Panasonic, Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is incorrectly
replaced.
•Dispose of used battery promptly.
•Keep away from children.
•Do not disassemble and do not dispose of in fire.
Introduction
6

.
Information for Users on Disposal of Old Equipment
and Batteries
Products
Battery
Notice:
The sign Pb below the symbol
for batteries indicates that this
battery contains lead.
[European Union]
These symbols indicate that the electrical and electronic
equipment and the battery with this symbol should not be
disposed of as general household waste at its end-of-life.
Instead, the products should be handed over to the applicable
collection points for the recycling of electrical and electronic
equipment as well as batteries for proper treatment, recovery
and recycling in accordance with your national legislation and
the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to
conserve natural resources and will help to prevent potential
negative effects on the environment and human health which
could otherwise be caused by inappropriate waste handling of
these products.
For more information about collection points and recycling of
these products, please contact your local municipal office, your
household waste disposal service or the shop where you
purchased the product.
Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page
http://www.jvc.eu to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance
with applicable national legislation or other rules in your country
for the treatment of old electrical and electronic equipment and
batteries.
Dear Customer, [European Union]
This apparatusis in conformance with the valid European
directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of JVC KENWOOD Corporation is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
SOME DO’S AND DON’TS ON THE SAFE USE OF
EQUIPMENT
This equipment has been designed and manufactured to meet
international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you attempt to use
the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and interconnections between pieces of
equipment) are properly made and in accordance with
the manufacturer’s instructions. Switch off and with draw
the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any way
— switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended
unless it is specifically stated that it is designed for unattended
operation or has a standby mode. Switch off using the switch
on the equipment and make sure that your family knows how to
do this.
Special arrangements may need to be made for infirm or
handicapped people.
DON’T use equipment such as personal stereos or radios so
that you are distracted from the requirements of road safety.
It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example
with curtains or soft furnishings. Overheating will cause damage
and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood
screws — to ensure complete safety always fit the manufacturer’s
approved stand or legs with the fixings provided according to
the instructions.
DON’T allow electrical equipment to be exposed to rain or
moisture.
ABOVE ALL
•NEVER let anyone especially children push anything into
holes, slots or any other opening in the case — this could
result in a fatal electrical shock;
•NEVER guess or take chance swith electrical equipment of
any kind — it is better to be safe than sorry!
Introduction
7

.
ATTENTION:
The product you have purchased is powered
by a rechargeable battery that is recyclable.
Please call 1-800-8-BATTERY for information
on how to recycle this battery.
(USA and Canada only)
Battery Pack
The supplied battery pack is a lithium-ion
battery. Before using the supplied battery
pack or an optional battery pack, be sure
to read the following cautions:
•To avoid hazards
... do not burn.
do not short-circuit the terminals. Keep it
away from metallic objects when not in use.
When transporting, carry the battery in
a plastic bag.
do not modify or disassemble.
do not expose the battery to temperatures exceeding
60°C (140°F), as this may cause the battery to overheat,
explode or catch fire.
use only specified chargers.
...
...
...
...
...
...
...
...
...
...
•To prevent damage and prolong service life
do not subject to unnecessary shock.
charge within the temperature range of 10°C to 35°C
(50°F to 95°F). Cooler temperatures require longer charging
time, or in some cases stop charging at all.
Warmer temperatures prevent complete charging, or in some
cases stop charging at all.
store in a cool, dry place. Extended exposure to high
temperatures will increase natural discharge and shorten
service life.
keep a 30% battery level (X) if the battery pack is not to be
used for a long period of time.
In addition, fully charge and then fully discharge the battery
pack every 6 months, then continue to store it at a 30%
battery level (X).
remove from charger or powered unit when not in use, as
some machines use current even when switched off.
do not drop or subject to strong impact.
Terminals
■ Common
This equipment is in conformity with the provisions and protection
requirements of the corresponding European Directives.
This equipment is designed for professional video appliances and
can be used in the following environments:
●Controlled EMC environment (for example, purpose-built
broad-casting or recording studio), and rural outdoors
environments.
In order to keep the best performance and furthermore for
electromagnetic compatibility we recommend to use cables not
exceeding the following lengths:
Port Cable Length
[DC INPUT]
[AUDIO INPUT 1/2] 3 m
[HDMI OUT 1-4]
[PHONES] 3 m
[REMOTE]
[USB]
Exclusive Cable
Shielded Cable
Shielded Cable
Exclusive Cable
Exclusive Cable
1.8 m
3 m
5 m
Shielded Cable 3 m
Caution:
Where there are strong electromagnetic waves or magnetism,
for example near a radio or TV transmitter, transformer, motor,
etc., the picture and the sound may be disturbed. In such case,
please keep the apparatus away from the sources of the
disturbance.
Introduction
8

.
Main Unit
•For safety, DO NOT
... open the
camera ’s chassis.
disassemble or modify the unit.
allow inflammables, water or metallic objects to enter the unit.
leave the battery pack attached when the
camera is not in
use.
...
...
...
place naked flame sources, such as lighted candles, on
the apparatus.
...
expose the apparatus to dripping or splashing.
leave dust or metal objects adhered to the power plug or
an AC wall outlet.
...
...
insert any objects in the camera .
...
...
...
...
...
...
...
•Avoid using the unit
in places subject to excessive humidity or dust.
in places subject to soot or steam such as near a cooking
stove.
in places subject to excessive shock or vibration.
near a television set.
near appliances generating strong magnetic or electric fields
(speakers, broadcasting antennas, etc.).
in places subject to extremely high (over 40°C or 104°F) or
extremely low (under 0°C or 32°F) temperatures.
...
...
...
...
...
...
•DO NOT leave the unit
in places of over 50°C (122°F).
in places where humidity is extremely low (below 35%) or
extremely high (above 80%).
in direct sunlight.
in a closed car in summer.
near a heater.
in high places such as on a TV. Leaving the unit in high
places while a cable is connected may result in a malfunction
if the cable is caught and the unit falls onto the floor.
remove the battery pack or disconnect the power supply
while the power is on.
...
...
...
...
...
...
...
•To protect the unit, DO NOT
allow it to become wet.
drop the unit or strike it against hard objects.
subject it to shock or excessive vibration during transportation.
keep the lens directed at extremely bright objects for long
periods.
expose the lens to direct sunlight.
swing it excessively when using the hand strap.
...
...
swing the soft camera case excessively when the camera is
inside it.
store the
camera in a dusty or sandy area.
•To prevent the unit from dropping,
•Fasten the grip belt securely.
•When using the
camera with a tripod, attach the camera to
the tripod securely.
If the
camera drops, you may be injured and the camera may
be damaged.
When a child uses the unit, there must be parental guidance.
Make a backup of important recorded data
Make a backup of important recorded data JVC will not be
responsible for any lost data.
It is recommended to copy your important recorded data to
a disc or other recording media for storage once every 3 months.
While the LCD monitor screen has more than 99.99% effective
pixels, 0.01% of the pixels may be bright spots (red, blue, green)
or dark spots. This is not a malfunction. The spots will not be
recorded.
•Be sure to follow the guidelines below to prevent
corruption or damage to your recorded data.
•Do not bend or drop the recording medium, or subject it to
strong pressure, jolts or vibrations.
•Do not splash the recording medium with water.
•Do not use, replace, or store the recording medium in
locations that are exposed to strong static electricity or
electrical noise.
•
Do not turn off the camera power or remove the battery
or AC adapter during shooting, playback, or when otherwise
accessing the recording medium.
•Do not bring the recording medium near objects that have
a strong magnetic field or that emit strong electromagnetic
waves.
•Do not store the recording medium in locations with high
temperature or high humidity.
•Do not touch the metal parts.
•
When formatting or erasing data using the camera , only
the file administration information is changed. The data is not
completely erased from the recording medium.
If you want to completely erase all of the data, we recommend
either using commercially available software that is specially
designed for that purpose, or by physically destroying
the camera with a hammer etc.
Recording Medium
•To prevent damage to the LCD monitor, DO NOT
LCD Monitor
...
...
push it strongly or apply any shocks.
place the
camera with LCD monitor on the bottom.
•To prolong service life
...
avoid rubbing it with coarse cloth.
Introduction
9

Precautions for Proper Use
Storage and Usage Locations
oAllowable ambient temperature and humidity
Be sure to use this unit within the allowable temperature range of
0°C to 40°C (32°F to 104°F) and a relative humidity of 35 % to 80
%. Using this unit beyond the allowable temperature range may
cause it to malfunction.
oStrong electromagnetic waves or magnetism
Noise may appear in the picture or audio and/or the colors may be
incorrect if this unit is used near a radio or television transmitting
antenna, in places where strong magnetic fields are generated by
transformers, motors, etc., or near devices emitting radio waves,
such as transceivers or cellular phones.
oUse of wireless microphone near this unit
When a wireless microphone or wireless microphone tuner is used
near this unit during recording, the tuner could pick up noise.
oAvoid using or placing this unit in the following
places.
0Places subject to extreme heat or cold
0Places with excessive dirt or dust
0Places with high humidity or moisture
0Places subject to smoke or vapor such as near a cooking stove
0Places subject to strong vibrations or unstable surfaces
0In a parked car under direct sunlight or near a heater for long
hours.
oDo not place this unit at places that are subject to
radiation or X-rays, or where corrosive gases occur.
oProtect this unit from being splashed with water.
(Especially when shooting in the rain)
oProtect this unit from getting wet when shooting on
a beach. In addition, salt and sand may adhere to the
body. Be sure to clean the unit after use.
oProtect this unit against penetration of dust when
using it in a place subject to sandy dust.
oDo not expose this device and the remote control to
excessive heat, such as direct sunlight or fire. The
built-in battery may explode if it gets heated up.
oDo not leave the card slot cover open for a long
period of time. Dirt entering the interior of the slot
may cause it to malfunction.
Transportation
oDo not drop or hit this unit against a hard object
when transporting.
Power Saving
oWhen this unit is not in use, be sure to turn off the
power in order to reduce power consumption.
Maintenance
oTurn off the power before performing any
maintenance.
oWipe the external cabinet of the unit with a soft cloth.
Do not wipe the body with benzene or thinner. Doing
so may cause the surface to melt or turn cloudy.
When it is extremely dirty, soak the cloth in a solution
of neutral detergent, wipe the body with it, and then
use a clean cloth to remove the detergent.
Rechargeable Batteries
oBe sure to use the only batteries specified by us.
We do not guarantee the safety and performance of
this device if an unspecified battery is used.
oThe battery is not charged when purchased.
oWhen using the battery in a low temperature
environment (10°C (50°F) or below), the operating
time may be shortened, or it may not function
properly. When using this unit outdoors in the winter
weather, warm the battery, such as by placing it in
the pocket, before attaching it.
oDo not expose the battery to excessive heat, such as
direct sunlight or fire.
oIf the battery is not to be used for a long time,
A To prevent deterioration of this unit, store it at a 30% battery
level.
B Fully charge and then fully discharge the battery pack every six
months, then continue to store it at a 30 % battery level.
oAfter removing the battery, store it in a dry place
between 15°C to 25°C (59°F to 77°F).
Introduction
10

SDHC/SDXC Cards
oThis camera recorder saves the recorded images
and audio sound on the SDHC/SDXC card (sold
separately) in the card slot.
oUse an SDHC/SDXC card (4 GB to 64 GB) with Class
6 or higher performance and formatted using this
camera recorder.
0Using cards other than those from Panasonic, TOSHIBA or
SanDisk may result in recording failure or data loss.
0When this unit is used in 4K2K mode, it is recommended that the
4 of the SD cards for recording be the same.
oIf the SDHC/SDXC card contains files recorded by
devices other than this camera recorder or files that
are saved from a PC, the recordable time may be
shorter or data may not be properly recorded. In
addition, the remaining space on the card may not
increase even when files are deleted using a PC.
UHS-I SDHC/SDXC cards can be used in the
same manner as standard SDHC/SDXC cards.
oUHS Speed Class is not supported.
Handling of SDHC/SDXC Cards
oThe access lamp and status indicator blink in green
when data on the SDHC/SDXC card is being
accessed. Do not remove the SDHC/SDXC card
during data access (such as recording, playback, or
formatting). Do not turn off the power or remove the
battery and AC adapter during access either.
oDo not use or store the SDHC/SDXC card in a place
that is subject to static electricity or electrical noise.
oDo not place the SDHC/SDXC card near locations
that are exposed to strong magnetic fields or radio
waves.
oInserting the SDHC/SDXC card incorrectly may
result in damage of this unit or the SDHC/SDXC card.
oWe are not liable for any accidental loss of data
stored on the SDHC/SDXC card. Please back up any
important data.
oMake use of the SDHC/SDXC card within the
prescribed conditions of use.
Do not use it at the following locations.
Places that are subject to direct sunlight, high
humidity or corrosion, places near thermal
equipment, sandy or dusty places, or in a car under
the sun with the doors and windows closed.
oDo not bend or drop the SDHC/SDXC card, or subject
it to strong impact or vibration.
oDo not splash the SDHC/SDXC card with water.
oDo not dismantle or modify the SDHC/SDXC card.
oDo not touch the terminals with your hands or with
a metal object.
oDo not allow dust, dirt, water, or foreign objects to
adhere to the terminals.
oDo not remove the labels or stick other labels or
stickers on the SDHC/SDXC cards.
oDo not use pencils or ballpoint pens to write on the
SDHC/SDXC cards. Always use oil-based pens.
oIf you format (initialize) the SDHC/SDXC card, all
data recorded on the card, including video data and
setup files, will be deleted.
oIf you want to wipe out all information by completely
erasing the data, we recommend either using
commercially available software that is specially
designed for that purpose, or by physically
destroying the SDHC/SDXC card with a hammer, etc.
When formatting or erasing data using the camera
recorder, only the file administration information is
changed. The data is not completely erased from the
SDHC/SDXC card.
oSome commercially available SDHC/SDXC cards
may be harder to be removed from this unit. Remove
them by hooking onto the groove on the cards.
0It will be easier to remove the cards after serveral times.
0Do not stick any stickers on the cards.
.
Groove
oThe SDHC/SDXC card may pop out when it is being
removed. Be careful not to lose the card.
Further Information
oDo not insert objects other than the memory card
into the card slot.
oDo not turn off the power, or remove the battery or
AC adapter during recording or playback.
oThe camera recorder may not show stable pictures
for a few seconds immediately after the power is
turned on, but this is not a malfunction.
oDo not drop this unit or subject it to strong impact or
vibration as it is a precision equipment.
oOptical performance of lens
Due to the optical performance of the lens, color
divergence phenomena (magnification chromatic
aberration) may occur at the periphery of the image.
This is not a camera malfunction.
oNoise may appear on the screen when you switch
from one mode to another.
oIf placed on its side, heat release efficiency will
deteriorate.
oUse the supplied AC adapter as the power supply.
Do not use the supplied AC adapter on other
devices.
oWhen the connectors that come with connector
covers are not in use, put on the covers to prevent
damage to the connectors.
Introduction
11

LCD Monitor/Viewfinder
oThe LCD monitor and viewfinder screens are
manufactured using high-precision technology.
Black spots may appear on the LCD monitor and
viewfinder screens, or red, blue, and/or white spots
may not disappear. However, this is not a
malfunction and these spots are not recorded on the
SDHC/SDXC card.
oIf you use this unit continuously for a long period of
time, the characters displayed in the viewfinder may
temporarily remain on the screen. This is not
recorded on the SDHC/SDXC card. They will not
appear after you turn the power off and then on
again.
oIf you use this unit in a cold place, the images may
appear to lag on the screen, but this is not a
malfunction. Retained images are not recorded on
the SDHC/SDXC card.
oDo not press against the surface with force or
subject it to strong impact. Doing so may damage or
break the screens.
oDue to the characteristic of the viewfinder display
device, colors may appear on the images when you
blink your eyes. This is not a malfunction. It does not
affect the recorded images or HDMI output.
Characteristic Lens Phenomena
oWhen shooting an extremely bright light source,
ghosting may occur. This is a characteristic of the
lens and not a malfunction.
Copyright
oAny recordings made on this camera recorder that
are played back for profit or public preview may
infringe on the rights of the owner of the recordings.
oDo not use the recordings for purpose other than
personal enjoyment without prior consent from the
owner.
Accessories
This camera recorder comes bundled with the following
accessories.
0AC Adapter
UIA336-12 / UIA336-1230 (For GY-HMQ10U)
UIA336-1230 (For GY-HMQ10E)
.
0Battery Pack
SSL-JVC50
.
0Audio Unit
.
Memo :
0To purchase a spare battery or battery charger, please visit a
nearby JVC dealer.
Introduction
12

Names of Parts
oFront oTop
.
AWB
REC
TW
MNK
B
A
DCE
J
FGHI
L
* Microphone is optional.
A Tally lamp
“Tally Settings” (A p. 27)
B Tally lamp
“Tally Settings” (A p. 27)
C Vent
Do not cover the vent.
D [AWB]Auto White Balance button
“Adjusting Automatic White Balance” (A p. 41)
E Lens/Lens cover
“Opening the Lens Cover” (A p. 23)
F Shoe
For mounting separately sold lights and accessories.
G Eyepiece focus lever
Lever for adjusting the visibility. It is found on the under side.
H Eyepiece
I Viewfinder
“Viewing the Viewfinder/LCD Monitor” (A p. 31)
J REC (Record) button
For starting or stopping recording.
“Shooting” (A p. 33)
K Zoom lever
For zooming to the Tele (T) or Wide (W) end.
“Zoom Operation” (A p. 35)
L Screw hole for installing accessories
M Microphone holder
For mounting an external microphone.
“Attaching an External Microphone” (A p. 22)
N Knob
Knob for locking the microphone in place.
Introduction
13

Names of Parts (Continued)
oSide (LCD Monitor)
.
CH-2 INPUT CH-1
3
4
5
2
1
2
3
0
CH-2
AUDIO INPUT
AUTO MANUAL
AUTO MANUAL
FULL AUTO
DOOR LOCK
SD
A E
SET
GAIN
ADJ. IRISWHT. BAL
SHUTTER
A F
M F
4321
C
A
D
B
AUD IO
SELECT
INPUT1
INPUT2
- LINE -
- MIC -
MIC+48V
INPUT1
INPUT2
L-
M-
H-
B -
A -
PRST
C
B
DEFG H J
A
SR Q
P
O
N
M
L
K
I
* Microphone is optional.
A Built-in microphone
“Using the Built-in Microphone” (A p. 45)
B Lens cover switch
C Manual ring
“Adjusting the Focus Manually” (A p. 35)
D [ADJ.] Knob
For adjusting the shutter speed (A p. 39), aperture
(A p. 40), exposure (A p. 38), and volume level of the
headphone or built-in speaker (A p. 46).
E [GAIN] Gain switch
For selecting one of the three sensitivity levels.
“Adjusting Manual Gain” (A p. 38)
F [WHT.BAL] White balance selection switch
For selecting one of the three types of white balance.
“Adjusting the White Balance” (A p. 41)
G [IRIS] Iris button
Press this button to adjust the aperture manually.
“Adjusting the Aperture” (A p. 40)
H [HDMI] terminals 1 to 4
You can play back the recorded video by connecting this unit to
the monitor with HDMI terminal.
“Viewing Images on a Monitor” (A p. 51)
I Card slots A to D
Slot for SDHC/SDXC cards. Open the door to insert the SDHC/
SDXC card.
“Inserting an SDHC/SDXC Card” (A p. 29)
J [DOOR LOCK] lever
Locks/unlocks the door cover.
K [SHUTTER] Shutter speed button
Press this button to set the shutter speed manually.
“Adjusting the Shutter Speed” (A p. 39)
L [SET] Button
For confirming the adjustments made for exposure, shutter
speed, etc.
M [AF/MF] Focus switch
For setting the focusing mode to the Auto or Manual mode.
“Selecting a Focusing Mode” (A p. 32)
N [AE±] Exposure button
Press this button to set the exposure manually.
“Adjusting the Exposure Manually” (A p. 38)
O [FULL AUTO] Full Auto mode selection button
For setting the shooting mode to the Full Auto or Manual mode.
“Selecting the Full Auto / Manual Shooting Mode” (A p. 32)
Introduction
14

P [CH-1/CH-2] CH-1/CH-2 recording level adjustment
knob
For adjusting the audio input level for CH-1 or CH-2.
“Adjusting the audio recording level” (A p. 46)
Q [CH1/CH2 AUDIO SELECT]
CH-1/CH-2 audio selection switch
For setting the method of adjusting the audio recording level for
CH-1 or CH-2 to the Auto or Manual mode.
“Adjusting the audio recording level” (A p. 46)
R [AUDIO INPUT 1/2]
INPUT1/INPUT2 audio input signal selection switch
For selecting the input signal for the [INPUT1] or [INPUT2]
terminal.
“Using an External Microphone Connected to the [INPUT1/
INPUT2] Terminal” (A p. 45)
S [CH-2 INPUT] CH-2 audio input terminal selection
switch
For selecting whether to input audio signals to CH-2 audio from
the [INPUT1] or [INPUT2] terminal.
“Selecting [CH-2] audio” (A p. 45)
Introduction
15

Names of Parts (Continued)
oLCD Monitor Unit
.
CH-2 INPUT CH-1
3
4
5
2
1
2
3
0
CH-2
AUDIO INPUT
AUTO MA NUAL
AUTO MANUAL
FULL AUTO
DOOR LOCK
SD
A E
SET
GAIN
ADJ. IRISWHT.BAL
SHUTTER
A F
M F
4321
C
A
D
B
AUDIO
SELECT
INPUT1
INPUT2
- LINE -
- MIC -
MIC+48V
INPUT1
INPUT2
L-
M-
H-
B -
A -
PRST
CAM/MEDIA INFO
USER2 USER3USER1
C
D
B
A
GFEH
I
* Microphone is optional.
A Monitor cover
B Built-in speaker
You can adjust the volume level using the [ADJ.] knob on the
same side as the LCD monitor.
Audio from the built-in speaker can be monitored using a
headphone.
“Monitoring Audio Sound Using a Headphone” (A p. 46)
Memo :
0The built-in speaker is usable only in the Media mode. Audio
is not output from the built-in speaker during Camera mode.
0Audio level in the Camera mode and Media mode can be
adjusted separately.
0When in the Media mode, the volume of the headphone and
speaker are adjusted at the same time.
0When the headphone connector is not connected to this unit,
the audio is always output from the built-in speaker.
C [CAM]/[MEDIA] button
Pressing the button each time switches between the Camera
mode and Media mode.
D [INFO] button
You can check the remaining recording time on the SDHC/
SDXC card as well as the remaining battery power.
“Checking the Remaining Recording Time” (A p. 44)
E [USER1] button
A specific feature in the menu setting can be assigned to this
button according to the user’s preference.
“Assigning Functions to the USER Buttons” (A p. 27)
F [USER2] button
A specific feature in the menu setting can be assigned to this
button according to the user’s preference.
“Assigning Functions to the USER Buttons” (A p. 27)
G [USER3] button
A specific feature in the menu setting can be assigned to this
button according to the user’s preference.
“Assigning Functions to the USER Buttons” (A p. 27)
H LCD monitor
“Viewing the Viewfinder/LCD Monitor” (A p. 31)
I Tripod mounting holes
“Attaching the Tripod” (A p. 23)
Memo :
0To prevent the camera recorder from falling, attach securely
using the rotation prevention hole.
0Use screws with a screw length 5 mm or below.
Introduction
16

oRear oSide (Grip Belt)
.
REC
ACCESS
CAM
MEDIA
BATT
DC
G
ABCEDF
H
I
JK LM
ON
* Microphone is optional.
A Battery lock release button
“Removing the Battery” (A p. 24)
B USB Connector
“Copying to Computer” (A p. 57)
C [DC] input terminal
“Charging the Battery Pack” (A p. 24)
D Battery Mount
“Attach the supplied battery.” (A p. 24)
E Vent
Do not cover the vent.
F [REC] Record button
“Shooting” (A p. 33)
For starting or stopping recording.
G [MEDIA] Media mode indicating lamp
Lights up in red during the Media mode.
H [CAM] Camera mode indicating lamp
Lights up in red during the Camera mode.
I [ACCESS] Access indicating lamp
Lights up or blinks during recording or playback.
Also blinks during battery charging.
J [STANDBY/ON OFF]/[CAM/MEDIA]
Power/Operation mode selection switch
STANDBY/
ON OFF
：Turns the power On/Off.
CAM/
MEDIA
：Sets this camera recorder to the Camera or
Media mode.
K Grip belt
L Headphone jack
“Monitoring Audio Sound Using a Headphone” (A p. 46)
M [REMOTE] Remote terminal
For connecting a separately sold wired remote control.
“Setting up the Remote Control” (A p. 23)
N [INPUT1] Audio input 1 terminal
For connecting an XLR microphone.
“Attaching an External Microphone” (A p. 22)
O [INPUT2] Audio input 2 terminal
For connecting an XLR microphone.
“Attaching an External Microphone” (A p. 22)
Introduction
17

LCD Screen Display
oLCD Screen Display Information (During Recording)
All the items are displayed in the illustration for explanatory purposes.
.
10X
10X
60P
UXP
4K
0:00:00:00
0:00:00[000:00]
WT
Overlap
AF
40SEC
≪PLAY
REC MENU
10:45AM
12dB
FAW
CH1
CH2
1/4000
±0.0
F3.4
u
t
s
r
q
p
o
n
12 3 4 56 7 8 9 0 a b
c
d
e
f
g
h
i
mlkj
A Exposure compensation
“Adjusting the Exposure Manually” (A p. 38)
B Shutter speed
“Adjusting the Shutter Speed” (A p. 39)
C Record mode
“Selecting a Video Recording Mode (HD Recording Only)”
(A p. 33)
D Zoom
“Zoom Operation” (A p. 35)
E Backlight compensation
“Setting Backlight Compensation” (A p. 43)
F TELE MACRO
“Using the Tele Macro Feature” (A p. 37)
G Touch Priority AE/AF
“Setting Touch Priority AE/AF” (A p. 43)
H Time
“Clock Setting” (A p. 26)
I Time-lapse recording
“Setting Time-lapse Recording” (A p. 44)
J Image Stabilizer
“Using the Image Stabilizer Feature” (A p. 43)
K Slot display
4K2K mode: lights up when SDHC/SDXC cards are inserted into
all the slots.
1920 mode: E lights up when an SDHC/SDXC card is inserted
into slot A.
L Battery indicator
“Checking the Remaining Recording Time” (A p. 44)
M Display button
Some displays disappear after approximately 3 seconds. Press
this button to show the displays again.
The displays appear for approximately 3 seconds with every
press. Press and hold this button to fix the displays.
Press this button again to release the displays.
N Recording mode button
“Selecting the Full Auto / Manual Shooting Mode” (A p. 32)
O Focus mode
“Selecting a Focusing Mode” (A p. 32)
P Overlap
Appears when “EDGE BLENDING” in the recording menu is set
to “16 PIXEL”.
“EDGE BLENDING” (A p. 62)
Q Wind cut
“Reducing Wind Noise” (A p. 46)
R Time-lapse recording counter
“Setting Time-lapse Recording” (A p. 44)
S Remaining recording time
“Checking the Remaining Recording Time” (A p. 44)
T Menu button
“Operating the Menu” (A p. 59)
U Scene counter
V Recording start/stop button
“Shooting” (A p. 33)
W Volume level
X Mode button
Switches between the Recording/Playback mode.
Introduction
18

Y Magnify button
“Using the Magnifying Function” (A p. 36)
Z FAW
“Using the Full Auto White (FAW) Function” (A p. 42)
a Gain level
“Adjusting Manual Gain” (A p. 38)
b Zoom button
“Zoom Operation” (A p. 35)
c Aperture value
“Adjusting the Aperture” (A p. 40)
d 4K2K mode
“Selecting a Video Recording Format or Recording Mode”
(A p. 33)
e Frame rate
“SYSTEM SELECT” (A p. 61)
Introduction
19

LCD Screen Display (Continued)
oLCD Screen Display Information (During Playback)
.
60P
MENU
≪REC
UXP
4K
0:01:23 0:12:34
Overlap
40SEC
1
a
0
23 4 5 6
7
8
9
A 4K2K mode
“Selecting a Video Recording Format or Recording Mode”
(A p. 33)
B Record mode
“Selecting a Video Recording Mode (HD Recording Only)”
(A p. 33)
C Operation indicator
“Screen Display During Playback” (A p. 50)
D Date/time
“Clock Setting” (A p. 26)
E Slot display
4K2K mode: lights up when SDHC/SDXC cards are inserted into
all the slots.
1920 mode: E lights up when an SDHC/SDXC card is inserted
into slot A.
F Battery indicator
“Checking the Remaining Recording Time” (A p. 44)
G Playback time
“Playing Back Videos” (A p. 47)
H Time-lapse playback
“TIME-LAPSE RECORDING” (A p. 62)
I Overlap playback
“EDGE BLENDING” (A p. 62)
J Scene counter
K Frame rate
“SYSTEM SELECT” (A p. 61)
Introduction
20