JVC KD-A95BT User manual

.
.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
.
KEN,SP,FR
©2012JVCKENWOODCorporation 0212DTSSANJEIN
CD RECEIVER / RECEPTOR CON CD / RÉCEPTEUR CD
For canceling the display demonstration, see page 4. /
Para cancelar la demostración en pantalla, consulte la página 4. /
Pour annuler la démonstration des affichages, référez-vous à la page 4.
ENGLISH
ESPAÑOL
FRANÇAIS
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
GET0801001B
[J]
KD-A95BT
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel
séparé.
For Customer Use:
Enter below the
Model No. and Serial
No. which are located
on the top or bottom
of the cabinet. Retain
this information for
future reference.
Model No.
Serial No.
Instructions CD RECEIVER KD-A95BT
KD-A95BTJ_Cover.indd 1KD-A95BTJ_Cover.indd 1 3/21/2012 11:21:39 AM3/21/2012 11:21:39 AM

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the
product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location: Bottom Plate
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit;
leave all servicing to qualified service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do
not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do
not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
2|ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Warning:
Stop the car before operating the unit.
Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too high
may cause an accident.
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.
Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by the sudden increase of
the output level.
Temperature inside the car:
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
appears on the display and animation/text
scroll will be stopped to prevent the display from
being blurred when the temperature falls below
0°C. Once operating temperature is normalised,
these functions will start working again.
Condensation:
When the car is air-conditioned, moisture may
collect on the laser lens. This may cause disc read
errors. In this case, remove the disc and wait for
the moisture to evaporate.
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may
result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.
Contents
Preparation ............................................................ 4
Canceling the display demonstration
Setting the clock
Basic operations ................................................... 5
Radio ........................................................................ 6
HD Radio™ tuner control .................................. 8
Satellite Radio tuner control ............................ 9
CD/USB ................................................................. 11
iPod/iPhone .......................................................... 12
Quick Search ....................................................... 14
External components ...................................... 14
Bluetooth姞connection
..................................... 15
Bluetooth mobile phone ................................ 17
Bluetooth audio player ................................... 21
Illumination color adjustments .................... 22
Brightness adjustments .................................. 23
Sound adjustments .......................................... 23
Menu operations ............................................... 28
Remote controller ............................................... 31
Additional information ................................... 32
Troubleshooting ................................................ 35
Specifications ..................................................... 38
How to read this manual:
This manual mainly explains operations using
the buttons on the control panel.
< > indicates the displays on the control
panel.
[XX] indicates the initial setting of a menu
item.
ENGLISHޓ|3
2012/2/15ޓ19:20:58KD-A95BT_J_EN

How to attach the control panel
How to detach the control panel
Avoid touching the connectors.
How to reset your unit
Your preset adjustments will also
be erased.
How to forcibly eject a disc
(Hold)
Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.
Preparation
Canceling the display
demonstration
The display demonstration is always turned on
unless you cancel it.
SET UP
DEMO
Clock
PUSH
(Hold)
1
(Initial setting)
DEMO
Off
On
PUSH
2
DEMO
Off
On
PUSH
3Select <Off>.
4Press MENU to exit.
Setting the clock
SET UP
DEMO
Clock
PUSH
(Hold)
1
Clock
DEMO
Clock
Color
PUSH
2Select <Clock>.
Clock
Clock Display
Set Clock
24/12H
PUSH
3Select <Set Clock>.
1 : 00AM
Set Clock
PUSH
(Initial setting)
4Adjust the hour.
1 : 00AM
Set Clock
PUSH
5Adjust the minute.
Clock
Set Clock
Clock Adjust
24/12H
PUSH
6Select <24H/12H>.
7Select <24Hours> or <12Hours>.
8Press MENU to exit.
4|ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Remote controller
Display window
Control panel
DO NOT expose to bright sunlight.
Remote sensor
Control dial Aim the remote controller directly at the sensor.
Flips down the panel
When you press or hold the following button(s)...
Control panel Remote
controller General function
/SOURCE —
Turns on.
Turns off. (Hold)
Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
SOURCE Press repeatedly to select the source.
Control dial
(turn)
VOL - / + Adjusts the volume level.
— Selects items.
Control dial
(press)
)
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
— Confirms selection.
EQ SOUND Selects the preset sound mode. ('page 23)
—
Enters “Hands-Free”menu ('page 18), or answers
incoming call when the unit rings.
Ends a call. (Hold)
— Returns to the previous menu.
/ / 
Selects a preset station ('page 7)/category ('page 10).
Searches for HD Radio stations only. (Hold)
Searches for HD Radio multicast channels.
Selects MP3/WMA/WAV folder. ('page 11)
/ / 
Searches for a station automatically. ('page 6)
Searches for a station manually. (Hold)
Selects track ('page 11, 12, 21)/Satellite Radio channel.
Fast-forwards or reverses track. / Changes Satellite Radio
channel rapidly. (Hold)
Basic operations
Basic operations
ENGLISHޓ|5
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source Display (Normal display pattern)*1
Radio Non-Radio Broadcast Data System station: Frequency
FM Radio Broadcast Data System station: Programme
type (PTY)/Frequency/Station name (PS)
HD Radio Track title*2/Album title*2/Frequency
Satellite Radio Category name/Channel name/Track title
CD/USB/Bluetooth Audio Track title/Album title/Artist*
*“No Name”appears for conventional CDs or if not
recorded.
iPod/iPhone (Headunit Mode/iPod
Mode)
iPod/iPhone (Application Mode) Application Mode
Pandora姞internet radio Station name/Album title/Track title
External Components Ext Input or Aux In
*1 Display information varies for large font and large clock display patterns.
*2 “No Text” appears when no text is received.
Radio
Searching for a station
88.3 MHz
ST NATURAL 1:00AM
FM
A
BSelect <FM> or <AM>.
Auto search. (Press)
Manual search. (Hold)
“M”appears, then press the button repeatedly.
“ST”lights up when receiving an FM stereo broadcast with sufficient signal strength.
Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.
While listening to a station...
(Hold)
“Preset Mode”screen appears.
1
The preset number flashes.
2Select preset number.
Basic operations
6|ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Auto presetting (FM)
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
If an HD Radio tuner box is connected, you can
also preset up to 6 stations for AM.
(Hold)
1
-<Tuner>
-<SSM>
-<SSM 01 – 06>
“SSM”appears. When all the stations are stored,
“SSM”disappears.
2
To preset <SSM 07 – 12>/<SSM 13 – 18>,
repeat steps 1 and 2.
Selecting a preset station
You can also select a preset station using / .
Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
(Hold)
1
-<Tuner>
-<Radio Timer>
-<Off>/<Once>/
<Daily>
[Off] Cancels Radio Timer.
Once Activates once.
Daily Activates daily.
2
-<FM>/<AM>
-<1>... <18>for FM/
<1>... <6>for AM
3Select the preset station.
.
4Set the activation time.
5Press MENU to exit.
lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if <AM>is set to <Hide>after
selecting an AM station for the timer.
('page 30)
Searching for your favorite
Programs—Program Type (PTY)
Search
This feature is only available for FM Radio
Broadcast Data System stations.
(Hold)
1
PTY Search starts.
.
If there is a station broadcasting a program of the
same PTY code as you have selected, that station is
tuned in.
2Select a PTY code.
PTY codes
News, Inform (Information), Sports, Talk, Rock, Cls Rock
(Classic Rock), Adlt Hit (Adult Hits), Soft Rck (Soft Rock), Top
40, Country, Oldies, Soft, Nostalga (Nostalgia), Jazz, Classicl
(Classical), R & B (Rhythm and Blues), Soft R & B (Soft Rhythm
and Blues), Language, Rel Musc (Religious Music), Rel Talk
(Religious Talk), Persnlty (Personality), Public, College, Habl
Esp (Spanish Talk), Musc Esp (Spanish Music), Hip Hop,
Weather
Radio
ENGLISHޓ|7
2012/2/15ޓ19:20:58KD-A95BT_J_EN

HD Radio™ tuner control
This unit can control the JVC KT-HD300 HD Radio tuner box (separately purchased).
Refer to the KT-HD300 instruction manual for installation and connection details.
HD Radio tuners can also tune in to conventional analog broadcasts.
Many HD Radio stations offer more than one channel of programming. This service is called
multicasting.
To find HD Radio stations in your area, visit <http://www.hdradio.com/>.
Searching for a station
AT HD NATURAL 1:00AMHD Radio
92.5 MHz FM
Classic Hits
Classic Hits Album
WXYZ-HD1
A
BSelect <FM> or <AM>.
Auto search. (Press)
Manual search. (Hold)
“M”appears, then press the button repeatedly.
HD Radio station
1:06AM AT HD NATURAL
Classic Hits
HD Radio
WXYZ-HD
Call Sign
HD Radio multicast channel
1:06AM AT HD NATURAL
Classic Hits
HD Radio
WXYZ-HD-1
First four letters of Call Sign
Channel number
Searching for HD Radio stations
only
“HD”flashes when a station is tuned in, and
searching stops.
Selecting an HD Radio multicast
channel
When receiving HD Radio multicast channels...
Select your desired channel
(HD1 to HD8).
“Linking”appears while linking to a multicast
channel.
(Hold)
1:08AM AT NATURAL
HD-SEARCH
HD Radio
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, you can
change the reception mode—digital or analog.
This setting does not take effect for the
conventional FM/AM stations.
(Hold)
1
-<Tuner>
-<Blend Hold>
-<Auto>/<Analog>/
<Digital>
[Auto]
Switches between digital and
analog audio automatically.
“HD”flashes if the radio station
forces only analog reception.
Analog Tunes to analog audio only.
“ANA”lights up.
Digital Tunes to digital audio only.
“DIGI”lights up.
2
The setting automatically returns to <Auto>
when you tune in to another broadcast.
For storing stations in memory and selecting a
preset station, 'page 6.
8|ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Satellite Radio tuner control
Before operating, connect either one of the following systems (not supplied) to the expansion port on
the rear of this unit. Refer to the “Installation/Connection Manual”for details.
SIRIUS Satellite
Radio
JVC KS-SRA100 (SIRIUS Satellite Radio interface) and
SCC1 (SiriusConnect Vehicle Tuner) or
SCVDOC1 (SiriusConnect Vehicle Docking Kit) and SIRIUS radio
XM Satellite
Radio
XMDJVC100 (Smart Digital Adapter for JVC) and XM Universal Tuner Box
CNPJVC1 (Connection cable for JVC) and CNP2000UCA (Protocol Interface
Adapter and XM Direct 2 Tuner)
For details, refer also to the instructions supplied with the other components.
For SIRIUS/XM programming, visit <www.siriusxm.com>.
Activating your SIRIUS
subscription
SIRIUS Satellite Radio starts updating the SIRIUS
channels. Once completed, SIRIUS Satellite Radio
tunes in to the Preview Channel.
1Select <SIRIUS>.
The 12-digit SIRIUS ID will be displayed.
You can also check your SIRIUS ID from the
label on the packaging, or from menu
operations ('page 29).
2Select “Channel 0” to check your SIRIUS ID.
3Contact Sirius Satellite Radio on the
internet at <www.siriusxm.com/
activatenow> to activate your
subscription.
Once subscription has been activated, “SUB
UPDATE PRESS ANY KEY”appears on the display.
Channel Updates (SIRIUS)
If channels are updated after subscription,
updating starts automatically. “UPDATING”
appears and no sound can be heard.
Updates take a few minutes to complete.
During an update, you cannot operate your
Satellite Radio.
Activating your XM subscription
XMDirect2 Tuner System starts updating all the
XM channels. “Channel 1”is tuned in
automatically.
1Select <XM>.
The display alternates between “RADIO ID”and
the 8-digit alphanumeric ID number.
You can also check your XM Satellite Radio ID
labeled on the casing of the XMDirect2 Tuner
System.
2Select “Channel 0” to check your XM
Satellite Radio ID.
3Contact XM Satellite Radio on the internet
at <www.siriusxm.com/activatenow> to
activate your subscription.
Once subscription has been activated, the unit
can be tuned to one of the available channels.
ENGLISHޓ|9
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Selecting a channel
A
C
B
Select <SIRIUS> or <XM>.
Select a category.
If you want to select channels of all categories...
SIRIUS: Select <ALL>.
XM: Skip this step.
Select a desired channel.
Holding the button changes the channels rapidly.
While searching, invalid and unsubscribed
channels are skipped.
Storing stations in memory
You can preset up to 18 channels for both SIRIUS
and XM.
While listening to a station...
(Hold)
“Preset Mode”screen appears.
1
The preset number flashes.
2Select preset number.
Selecting a preset station/
category/channel from the list
“List”menu appears.
1
If a category is selected, the first channel of this
category is tuned in.
2Select <Preset>, <Category> or
<Channel>.
3Select a desired item.
Satellite Radio tuner control
10 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Playing a CD/USB device
Label side
The source changes to “CD”and playback starts.
or
USB cable from the rear
of the unit
The source changes to “USB”and playback starts.
This unit can play MP3/WMA files stored in CD-R, CD-RW, and MP3/WMA/WAV files in USB mass
storage device (such as a USB memory and Digital Audio Player).
Make sure all important data has been backed up. We shall bear no responsibility for any loss of data
in USB mass storage class device while using this system.
Ejected disc not removed within 15 seconds will reload automatically.
If the disc cannot be ejected, 'page 4.
Selecting a folder/track
Selects folder.
(For MP3/WMA/WAV)
Selects track. (Press)
Fast-forwards or reverses the
track. (Hold)
Selecting a track/folder from
the list
1
2Select a folder. (For MP3/WMA/WAV)
For MP3/WMA/WAV
If there are many folders or tracks, you can fast
search for the desired folder or track by turning
the control dial quickly, or use Quick Search
('page 14).
3Select a track.
Selecting the playback modes
You can select one of the following playback
modes at a time.
(Hold)
<Repeat>)<Random>
1
2
Repeat 
Off Cancels repeat playback.
Track Repeats current track.
Folder * Repeats current folder.
Random 
Off Cancels random playback.
Folder *
Randomly plays all tracks of
current folder, then tracks of
next folders.
All Randomly plays all tracks.
* For MP3/WMA/WAV
CD/USB
CD/USB
ENGLISHޓ|11
2012/2/15ޓ19:20:58KD-A95BT_J_EN

iPod/iPhone
Playing an iPod/iPhone
or
USB cable from the rear
of the unit
USB 2.0 cable (not supplied)*
The source changes to “iPod-1/iPod-2”and
playback starts.
* Recommend to use a cable suitable for car use.
Selecting the control mode
-<Headunit Mode>/
<iPod Mode>/
<Application Mode>
Headunit
Mode
Controls iPod playback through
this unit.
iPod Mode Controls iPod playback from the
iPod/iPhone.
Application
Mode
The sound of any functions
(music, games, applications, etc.)
running on the connected iPod/
iPhone is emitted through the
speakers connected to this unit.
You can also change the setting using <iPod
Switch>in the menu. ('page 30)
Selecting a track
Applicable under <Headunit Mode>/<iPod
Mode>only.
For <Application Mode>, applicable only for
some audio applications.
Selects track/chapter. (Press)
Fast-forwards or reverses the
track. (Hold)
Selecting a track from the list
Applicable under <Headunit Mode>only.
1
(Hold)
Playlists)Artists)Albums)Songs)
Podcasts)Genres)Composers)
Audiobooks)(back to the beginning)
2Select the desired list.
Repeat this step until the desired track is selected.
If the selected menu contains many tracks, you
can fast search for the desired track by turning
the control dial quickly, or use Quick Search
('page 14).
3Select the desired track.
Selecting the playback modes
Applicable under <Headunit Mode>only.
You can select one of the following playback
modes at a time.
(Hold)
<Repeat>)<Random>
1
2
Repeat 
Off Cancels repeat playback.
One Functions the same as “Repeat
One”of the iPod.
All Functions the same as “Repeat
All”of the iPod.
Random 
Off Cancels random playback.
Song Functions the same as “Shuffle
Songs”of the iPod.
Album Functions the same as “Shuffle
Albums”of the iPod.
“Album”is not applicable for some iPod/
iPhone.
12 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

iPod/iPhone application
You can operate JVC original application with this
unit in <Application Mode>. For more details, visit
JVC website: <http://www3.jvckenwood.com/
english/car/index.html> (English website only).
Pandora姞internet radio
Preparation
1Search for “Pandora” in the Apple iTunes
App Store to find and install the most
current version of the Pandora姞
application onto your device.
2In the application on your device, log in
and create an account with Pandora姞. If
you are not a registered user, an account
can also be created at www.pandora.com.
Pandora姞is only available in the US.
Because Pandora姞is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may
become unavailable.
Some functions of Pandora姞cannot be
operated from this unit.
For issues using the application, please contact
Pandora at [email protected].
Listening to
Pandora姞internet radio
1Open the Pandora姞application on your
device.
2Connect the device to one of the USB
terminals. ('page 12)
The source switches and broadcast starts
automatically from your current station.
Basic Operations
Starts/pauses playback.
Selects thumbs up/thumbs
down.
If thumbs down is selected,
current track is skipped.
Skips track.
Creating a new station
You can create a new station based on the
currently playing song or artist.
1
-<NEW STATION>
-<From Artist>/
<From Song>
A new station is created based on the current
song or artist.
2
Searching the registered station
from the list
1
BY DATE According to the registration date
A - Z Alphabetical order
You can proceed directly to step 3 to select
station or use the search menu to scroll through
the desired menu. ('page 14)
2Select the station list display mode.
3Select the desired station.
To bookmark song/artist information
While receiving a song...

-<BOOKMARK>
<This Artist>)<This Track>
“BOOKMARKED”appears and the song/artist
information is stored to the iPod/iPhone.
This unit allows you to bookmark songs and/or
artists in your personalized Pandora姞account.
The bookmarks will not be available for review
on the unit but will be available in your
Pandora姞account.

(Hold)


iPod/iPhone
ENGLISHޓ|13
2012/2/15ޓ19:20:58KD-A95BT_J_EN

If you have many folders/tracks/contacts, you can search through them quickly according to the first
character (A to Z, 0 to 9 and OTHERS).
1Enter list menu or “Hands-Free” menu.
CD (MP3/WMA)/
USB (MP3/WMA/WAV)
iPod/iPhone Bluetooth phonebook
Select the desired list. Select <Phonebook>.
“OTHERS”appears if the first character is not A to
Z or 0 to 9, such as #, -, !, etc.
2Select the desired character (A to Z, 0 to 9
and OTHERS).
For CD/USB and iPod/iPhone, repeat step 3 until
the desired track is selected.
Searching may not work on some of the layers
of the selected menu (for iPod/iPhone).
3Select your desired folder/track/contact.
External components
You can connect an external component to the following terminals:
EXT IN: Expansion port on the rear of this unit using the following adapters (not supplied):
- JVC KS-U57, Line Input Adapter
- JVC KS-U58, AUX Input Adapter
AUX: AUX (auxiliary) cable from the rear of the unit.
For details, refer also to the instructions supplied with the adapters or external components.
For connection to expansion port on the rear of this unit, refer to the “Installation/Connection Manual”.
Playing an external component
from AUX/expansion port
AUX
Portable audio
player, etc.
3.5 mm (1/8") stereo mini plug
(not supplied)
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.
1Connect to AUX cable and/or the
expansion port from the rear of the unit.
(Hold)
-<Source Select>
-<AUX Source>or
<Ext Input>
-<Show>
Press MENU to exit.

Select <Show>.
2Set the source as necessary.
3Select <AUX IN> or <EXT IN>.
4Turn on the connected component and
start playing the source.
Quick Search
Quick Search
14 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

By connecting the supplied KS-UBT1 USB Bluetooth Adapter and microphone to this unit, you can
operate a Bluetooth device using this unit. Refer to the “Installation/Connection Manual”for details on
connecting the microphone.
Once the USB Bluetooth Adapter is attached, this unit is always
available for pairing.
Refer also to the instructions supplied with the Bluetooth
device.
Refer to the separate appendix to check the countries where
you may use the Bluetooth function.
If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a
phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using
your mobile phone.
This unit supports the following Bluetooth profiles
Hands-Free Profile (HFP 1.5)
Object Push Profile (OPP 1.1)
Phonebook Access Profile (PBAP 1.0)
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)
Warning:
Stop the car in a safe place before operating complicated steps such as dialing numbers, using
phonebook, etc.
KS-UBT1 Microphone
Pairing a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and
the device.
Up to five Bluetooth devices can be registered in this unit.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
This unit supports Secure Simple Pairing (SSP).
1Connect the USB Bluetooth adapter
(KS-UBT1) to one of the USB input
terminals.
KS-UBT1
or
USB cable from the
rear of the unit
2Search and select “JVC Unit” on the Bluetooth device.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code
immediately after searching.
Bluetooth 姞 connection
Bluetooth 姞 connection
ENGLISHޓ|15
2012/2/15ޓ19:20:58KD-A95BT_J_EN

3Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below
Pairing?
Yes: Press VOL
No: Press BACK
Pairing?
Device:
Passkey: XXXXXX
(A)
[Device name]
“XXXXXX”is a 6-digit passkey randomly
generated during each pairing.
Operate the Bluetooth device to confirm
the passkey.
Ensure that the passkey which appears
on the unit and Bluetooth device is the
same.
Select “Yes” to confirm the passkey.
Pairing?
Yes: Press VOL
No: Press BACK
Pairing?
Device: [Device name]
(B)
You can change to a desired PIN code before
pairing. ('page 30)
(2) If only “Pairing” appears, operate the
Bluetooth device to confirm pairing.
(1) When the Bluetooth device prompts
you to key in a PIN or passcode, enter the
PIN code “0000” into the Bluetooth
device. The above should then appear on
the display.
Select “Yes” to confirm the pairing.
After pairing is successful, “Pairing COMPLETED”appears on the display.
The unit will establish a connection with the newly paired Bluetooth device and you can then control
the Bluetooth device through the unit.
“”will light up when a phone is connected.
“”will light up when an audio device is connected.
Once the connection is established, the device is registered to the unit and there is no need to
perform the pairing again unless you delete the registered device.
Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to
the unit manually. Refer to the instruction manual of the Bluetooth device for more information.
Connecting/Disconnecting a registered device manually
To connect
1
(Hold)
-<Bluetooth>
-<Phone>/<Audio>
-<Connect>
2Select <Connect>.
“Connecting...”appears on the display when the
unit is connecting to the device.
“Connected”#“[Device Name]”appears on the
display when the device is connected.
3Select the desired device.
4Press MENU to exit.
To disconnect
1
(Hold)
-<Bluetooth>
-<Phone>/<Audio>
-<Disconnect>
2Select <Disconnect>.
“Disconnected”#“[Device Name]”appears on the
display when the device is disconnected.
3Select the desired device.
4Press MENU to exit.
Bluetooth 姞 connection
16 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Connecting to JVC original
application
JVC original application is designed to view JVC
car receiver status and perform simple control
operations on Android smart phones.
For JVC original application operations, visit JVC
website:
<http://www3.jvckenwood.com/english/car/
index.html> (English website only).
1
(Hold)
-<Bluetooth>
-<Application>
-<Connect>
2Select <Connect>.
“Connected”#“[Device Name]”appears on the
display when the device is connected.
3Select the desired smart phone.
4Press MENU to exit.
Deleting a registered device
(Hold)
1
-<Bluetooth>
-<Delete Pairing>
-[Device Name]
-<Delete OK?>
“OK”appears when the device is deleted.
2Select <Delete OK>.
3Press MENU to exit.
Bluetooth mobile phone
Receiving a call
To receive a call
When there is an incoming call, the source
automatically changes to “BT-1”/“BT-2”.
“Receiving...”appears on the display, followed
by the phone number or name.
The display flashes in blue. ('page 20)
or
You can also press ////SOURCE on the
remote control to answer a call.
When <Auto Answer>is set to <On>, the unit
answers incoming calls automatically.
('page 20)
To end a call
(Hold) or (Hold)
You can also press and hold ////SOURCE
on the remote control to end a call.
To deactivate/activate hands-free
mode
During a phone conversation...
Operations may vary according to the
connected Bluetooth device.
Bluetooth 姞 connection
ENGLISHޓ|17
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Adjustments during a call
Phone volume(00 — 50)
[Volume 15]: Volume
adjustments made during a call
will not affect the other
sources.
Microphone level
(01— 03)[02]: As the number
increases, the microphone
becomes more sensitive.
Noise Reduction and Echo
Cancellation mode:
Turns on/off.
Text message notification
When a text message is received, the unit rings
and “[Device Name]”#“Received Message”
appears.
<Message Notice>must be set to <On>.
('page 20)
You cannot read, edit, or send a message
through the unit.
This feature is only available on certain phones.
Switching between two connected mobile phones
When two mobile phones are connected to the unit, you can access to both “Hands-Free”menus.
Press to enter 1st phone’s “Hands-Free”menu.
Press twice to enter 2nd phone’s “Hands-Free”menu.
Press to return to 1st phone’s “Hands-Free”menu.
Making a call from the hands-free menu
1Enter the “Hands-Free” menu.
Refer to the table below
for options.
2Select a calling method.
3Select and call the contact (name/phone number).
Dialed Calls
Call
Select the name/phone number
If the phonebook contains many numbers, you can fast search for the desired
number by turning the control dial quickly, or use Quick Search ('page 14).
“No History Found”appears if there is no recorded call history.
“No Data”appears if no entries are found in the Bluetooth device’s
phonebook.
“Send Phonebook Manually”appears if <Phonebook Select>is set to
<In Unit>or the phone does not support PBAP. ('page 20)
Received Calls
Missed Calls
Phonebook
Dial Number Enter the phone number to dial.
Call
Move the entry position
Select number/character
Bluetooth mobile phone
18 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Using voice recognition
You can use the voice recognition features of the
connected phone through this unit.
“Not Support”appears if the connected phone
does not support this feature.
If only one phone is connected,
(Hold)
If two phones are connected,
1Enter voice recognition mode.
(Hold)
Select the desired phone
Enter “phone list”
2When “Waiting Voice”#“[Device Name]”
appears on the display, speak the name of
the contact you want to call or the voice
command to control the phone functions.
Supported voice recognition features vary for
each phone. Please refer to the instruction
manual of the connected phone for details.
Deleting a contact (name/
phone number)
Only when <Phonebook Select>is set to <In
Unit>. ('page 20)
1Enter the “Hands-Free” menu.
-<Dialed Calls>/
<Received Calls>/
<Missed Calls>/
<Phonebook>
2Select a call method.
3Select the contact (name/phone number)
to be deleted.
Phone Number
or
Name
(Hold)
4Enter “Delete Entries” menu.
Delete Selected name/phone number
from step 3 is deleted.
Delete
All
All name/phone numbers from
selected menu in step 2 are
deleted.
5Select <Delete> or <Delete All>.
Bluetooth mobile phone
ENGLISHޓ|19
2012/2/15ޓ19:20:58KD-A95BT_J_EN

Using the Settings menu
1Enter the “Hands-Free” menu.
2Select <Settings>. To return to the previous menu, press .
To exit from the menu, press MENU.
3Repeat this step to perform the necessary
settings.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item Selectable setting (Initial: [XX])
Phonebook
Select *
[In Phone]: The unit browses the phonebook of the connected phone.
In Unit: The unit browses the phonebook registered in the unit. (You can copy
the phonebook memory using <Phonebook Trans>('page 30).)
Auto Answer On: The unit answers incoming calls automatically.
[Off]: The unit does not answer incoming calls automatically.
Ringing Tone [In Unit]: The unit rings to alert you when a call/text message comes in.
–Call Tone: Select your preferred ring tone (Tone 1 — 5) for incoming calls.
–Message Tone: Select your preferred ring tone (Tone 1 — 5) for incoming
text messages.
Default ring tone is different according to the paired device.
In Phone: The unit uses the connected phones’ ring tone to alert you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
Ringing Color Color 01 — 29[06]: Select your preferred color for incoming call/text message
alerts.
Off: Cancels.
NR/EC Mode [On]: Turns on the Noise Reduction and Echo Cancellation of the connected
microphone for clearer sound.
Off: Cancels.
MIC Setting Level (01— 03)[02]: The sensitivity of the microphone increases as the MIC
level is increased.
Message Notice [On]: The unit rings and “[Device Name]”#“Received Message”appears to alert
you of an incoming text message.
Off: The unit does not alert you of an incoming text message.
* Selectable only when the connected phone supports PBAP.
Bluetooth mobile phone
20 |ޓENGLISH
2012/2/15ޓ19:20:58KD-A95BT_J_EN