zRAMP
Quick&Setup&Guide
Zixi&ONAIR&app
Decoder BR-DE900
The zRAMP Video-over-IP server accepts Zixi transport protocol from JVC cameras and Zixi ONAIR iOS/Android app.
Zixi protocol utilizes Forward Error Correction (FEC), Repeat Request (ARQ) and Adaptive Bit Rate (ABR) to
compensate for up to 30-40%of packet loss due to network congestion, limited bandwidth and excessive jitter.
The zRAMP outputs UDP, RTP, RTP+SMPTE FEC and RTMP streams to hardware/software decoders, CDNs (Facebook,
YouTube etc.) and SW video switchers (ProHD Studio, vMix).
Zixi&QoS&-The&Most&Resilient&Video&Transport&over&the&Internet
The&zRAMP&is&a&Network(Attached(Appliance(and&is&controlled/operated&via&browser&from&another&PC&or&smart&device&
on&the&same&network&or&via&WAN&/&Internet.&&Recommended&browsers:&Chrome,&Mozilla&Firefox.
(Please,&do¬&connect&a&monitor&to&the&DisplayPort,&only&Linux&login&will&be&displayed.)
zRAMP&login:
Setup&PC&network&adapter:&IP&=&192.168.1.77 (or&similar),&Netmask&=&255.255.255.0
Launch&Chrome&browser,&type&http://192.168.1.7:8080,&Login&=&admin&Password&=&jvc1234
Connection&via&WAN&/&Internet
In&most&cases,&the&zRAMP&would&be&connected&to&the&Internet&via&router/firewall&gateway.
The&following&ports&need&to&be&forwarded&to&the&zRAMP&local&IP&address:
UDP&2088 for&incoming&video&stream.
TCP&8080 to&enable&login&from&the&Internet&/&WAN
TCP&7777 to&stream&Flash&preview&to&the&Internet&/&WAN
TCP&4500 HTTP&proxy&for&files&transfer
TCP&22 SSH&for&service
192.168.1.7
Internet Router
Firewall zRAMP
Port(Forwarding
UDP&2088
TCP&8080
TCP&7777
Global&IP&address
Local&IP&address
WAN
TCP&4500
DHCP
