JWA RIVADAVIA 70793 User manual

ASSEMBLY INSTRUCTION
RIVADAVIA
4Pce Outdoor Lounge Setting
ITEM CODE:70793
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Take care when lifting. Product should be assembled as near as possible to the
point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads.
7. Assembly is to be carried out by a competent adult(s) ONLY.
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2

3

4

5

You will need the following
Part A: Single Sofa
Step 1：
•Prepare a floor or benchtop with a protective blanket or
cardboard.
•Attach right arm and left arm (A)(B) to seat (C), secure with
bolt (K), thread through washer (L). Fasten with Allen key (M).
•Repeat for all 6 connection points.
6

Step 2: You will need the following
•Attach back panel (D) to the finished part from Step 1, secure
back panel with bolt (K), thread through washer (L). Fasten
with Allen key (M).
•Repeat for all 5 connection points.
7

Assembly is complete
8

You will need the following
Part B: 2 Seat Sofa
Step 1：
•Prepare a floor or benchtop with a protective blanket or
cardboard.
•Attach right arm and left arm (E)(F) to seat (G), secure
with bolt (K), thread through washer (L). Fasten with
Allen key (M).
•Repeat for all 6 connection points.
9

Step 2: You will need the following
•Attach back panel (H) to the finished part from Step 1,
secure back panel with bolt (K), thread through washer (L).
Fasten with Allen key (M).
•Repeat for all 6 connection points.
10

Assembly is complete
11

You will need the following
Part C: Coffee Table
•Prepare a floor or benchtop with a protective blanket or
cardboard.
•Attach 2 x legs (J) to table top (I), secure with bolt (K),
thread through washer (L). Fasten with Allen key (M).
•Repeat for all 6 connection points.
12

Assembly is complete
13

14