jWIN JL-725 User manual

MODEL : JL-725
1.AUTO/ON/OFF SWITCH
2.LED CLOCK DISPLAY
3. LED INDICATOR FOR "AUTO"
4.SNOOZE/SLEEP-OFF BUTTON
5.ALARM SET/OFF BUTTON
6.TIME SETBUTTON
7.SLEEP SETBUTTON
8.(DIMMER) LOW/HIGH SWITCH
9.HOUR BUTTON
10. MINUTEBUTTON
11.VOLUME CONTROL KNOB
12.AM/FM SWITCH
13.TUNING CONTROL KNOB
14. BATTERY COMPARTMENT
15. FM PIG-TAILED WIRE
16.AC POWER CORD
17. AM/FM SCALE & POINTER
18.PROJECTION ON/OFF BUTTON
19.CLOCK PROJECTOR
20.TIME SET BUTTON FOR PROJECTION
21.HOUR BUTTON FOR PROJECTION
22.MINUTE BUTTON FOR PROJECTION
23.FOCUS ADJUSTMENT KNOB
24.RADIO/BUZZ SWITCH
AC POWER OPERATION
Before connetingto the power supply,ensure that the supplycorrespondsto the informationonthe
rating label on the bottom of the apparatus.
WARNINGS
Disconnect thepower plugfrom thereceptacle when not in use. Toavoid the riskof electric shock,
do not remove the cover of the apparatus.There are nouser serviceable parts inside. Toprevent
fire or shock hazard,do not expose the apparatusto rain or moisture.
TO SET THE CLOCK TIME
1.Set the ON/OFF/AUTO switch (1) to 'OFF'. Connect thepower cord to the power supply.The clock
display will blink to indicatea power interruptionandthat the display time is incorrect.
2.Toset the correct time, press the MINUTE button(10) or HOUR button (9) until the correct
time is displayedwhile pressing and holding the TIME SET button (6).
3. Open the Battery Compartmentcover and fita 9V battery.The purpose of thisbattery isto
store the informationrelatingto the alarm timeandto keep the clockfunctioning in the event of
disconnection from the power supply or power interrruption.In case of the power failure, the clock will
continueto keep timebut will not displayit.
THE LED DIGITAL CLOCK AND THE PROJECTION
CLOCK MUST BE SET SEPARATELY
TIME SETTING FOR PROJECTION
-Toset HOUR, press simultaneously the HOUR BUTTON (21)andtheTIME SET BUTTON (20).
Keep them depressed until the correct hour is displayed.
-Toset MINUTE, presssimultaneouslythe MINUTE BUTTON (22) and theTIME SET BUTTON (20).
Keep them depressed until the correct minute is displayed.
-Focus setting:Toadjust the projectionfocus, turnthe FOCUS ADJUSTMENT KNOB (23)until
the projected time is clearly shownonthe ceilingorwall.
NOTE : THE MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
25.LED INDICATOR FOR "PM"

TOSET OR RESET THE ALARM TIME
1.Press andhold theALARM SET/OFF button(5).
2.While holdingtheALARM SET/OFF button(5),press the HOUR button(9) andMINUTE
button(10) to advance the time until the desired alarm time is shownonthe display.
TOSET THE ALARM TOWAKE TORADIO
1. Set the alarm time as previously instructed. Select a radio station and make sure thevolume level is
set as desired.
2.Slide the ON/OFF/AUTO switch (1) to the 'AUTO'position. Set the RADIO/BUZZ switch (24) to the
RADIO position. When the actual time matches the selected preset alarm time, the unit automatically
turns on for 1 hour and 59 minutes and then shuts off.
Notes :
-Toshutoffthe alarm,press theALARM SET/OFF button(5) once andalarm time will be reset for
the next day.Slide the ON/OFF/AUTO switch (1) to the OFF positionto turn offalarm andnot set
it for the nextday.
-The alarm can be temporarily turned offmanually bypressingthe SNOOZE button(4).The radio
will turn onautomatically 9minutes later.
TO SET THEALARMTO WAKETO BUZZER
1. Set the alarm time as previously instructed. Set the RADIO/BUZZswitch (24)to the BUZZposition,
2.Slide the ON/OFF/AUTO switch (1) to theAUTO position.When the actual time matches thepreset
alarm time, the unit automatically turnson for 1 hourand 59 minutes and then shutsoff.
Notes :
- Toshutoffthe alarm,press theALARM SET/OFF button(5) once andalarm time will be reset for
the next day.Slide the ON/OFF/AUTO switch (1) to the OFF positionto turn offalarm andnot set
it for the nextday.
- The alarm can be temporarily turned offmanually by pressingthe SNOOZE button (4). Thebuzzer
will turn onautomatically 9minutes later.
TO SET THE SLEEP TIME
1.Set the ON/OFF/AUTO switch (1) to 'OFF'or ‘AUTO’.
2.Press and hold the SLEEP SET button(7).
5.The radio will nowoperate until the sleep time has elapsed ormaybeswitchedoffbypressingthe
SNOOZE/SLEEP-OFF button (4).
TO TUNR ON THE RADIO
TheAM radio bandusesan internal antenna to receive a signal. Rotate the unit to get the bestreception
for AM. For FM,ensure that the FM pig-tailed antenna is completely uncoiled and extended.
1. Set the ON/OFF/AUTO switch (1) to ‘ON’position
2.Set theAM/FM switch (12)to the desired band.
3.Adjust theTUNING CONTROL knob (13)to select the desired station.
4.Adjust the VOLUME CONTROL knob (11).
5. To turn off the radio, set the ON/OFF/AUTO swtich (1) to ‘OFF’position. If the radio does not
switch off,this may be caused byinadvertent operationofthe sleep function. Tocancel this, press
the SNOOZE/SLEEP-OFF button (4) once.
Notes: To increase the sleep time over 1 hour, press the HOUR button(9)to set the hour while
holding the SLEEP SET button (7). The display will be changed to 1 hour and 59 minutes, which is
the maximum sleep time setting. Press the MINUTE button (10) to decrease the minute.
3.Press the MINUTE button(10)to set the minute while holding the SLEEP SET button (7).Thesleep
time will decrease from 59 minutes to zero.
4.Release the SLEEP SET button (7) when you finish to set the sleep time.
Notes: Pressing the SLEEP SET button (7) again after setting the sleep time will reset the sleep time to
59 minutes. In this case, you need to set the sleep time again.

SPECIFICATIONS
Frequency Range : AM 530 – 1710 kHz
FM 88 – 108 MHz
Output Power : 400 mW
Speaker Impedance : 8 ohm
Battery Backup: 9Vbattery (forthe clockbackup)
Power Source : AC120V / 60 Hz/ 5 Watts
Dripping warning : The product shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall placed on the product.
Ventilation warning : The normal ventilation of the product shall not be impeded for intended use.
Warning : To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture
Note : Do not connect FM antenna to outside antenna
No naked flame sources, such as lighted candles, should be placed on the apparatus
Do not place the product in closed bookcases or racks without proper ventilation